Reviews
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
Size can be checked at a glance.
The Hexagonal Wrench is more expensive than the regular wrenches, but it is color coded by size so you can find the size you want at a glance. The strength of the wrench is high and you can put the torque firmly. View detail
Is it good?
Because it is PB, the quality is high, but it is a little expensive. When you want to hang the torque, it is not suitable for you. Of course, it is a good driver, but when I think about the cost performance, I think that the Mega-Dora of Vessel is superior. View detail
Okay.
The famous PB slotted screwdriver has a parallel tip It has steps like this. It is easy to use, but it is not easy to damage it because it has no strength. If you want to damage it, you should prepare the driver for it. Time was twisted and the tip was broken. (Sad.) View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
It served its purpose
It is purchased at the same time as the 8mm one, and I use it with ANEX's Handlebar
This 10mm was the right choice for the Initial Adjuster adjustment of the Front
The product is well suited for its purpose and I would give it 100 points for its quality and texture
I'm sorry, I didn't feel much Merit sticking out in Others Others has been given an average score
View detail
Fertilizer tool box
【What made you decide the purchase?】
- Because I possessed precision Phillips Screwdriver made by PB, I will buy Slotted screwdriver as well. Size is the same as the Phillips Screwdriver Smallest No. 00
【How was it actually used?】
- Ease of use like the Phillips Screwdriver, the Grip end rotates to Smooth without resistance, so I could turn Screw securely. However, compared with Phillips Screwdriver, I am concerned that the total length is 10 mm shorter
[Is there anything I was disappointed about?]
- This is also the same as Phillips Screwdriver, but the Gate trace processing that was done when casting the resin of the Grip part is not good finish. Sharpen the convex portion with Design knife
【Hope for Manufacturer - Please let me know if you have any improvement points]
- It is easy to understand if the color of Grip is different by Size
【Have you compared items?】
- ANEX Super fitPrecision Driver
[Others]
- As the usual frequency of use is Precision Driver, even if you have a hobby tool that does not have much activity. The fertility of the tool box has increased ( - ∀ - `)
View detail
Hexagonal
I wanted to use the above photo Rainbow from the past, but since the monochromatic type of the bottom photo was sold at bargain at a neighboring tool shop, I bought an impulse.
Easy to use is perfect as it is origami, this Type is Holder is Magnet so Garageetc. It's very convenient because it can be affixed to the wall of.
View detail
Cross Driver
Since I was doing Events at a neighborhood shop, I went to see it, I just bought it.
Events contents are Grip part and Blade part are six colors (Red - Blue - Yellow color - Black - Green - Purple), press-fitted on the spot, I also purchased two unintentionally.
View detail
For carburetor
In order to disassemble and clean the carburetor, I purchased it because I needed a slotted screwdriver with the same size as the axis.
I looked for various things, but surprisingly I did not sell a slotted screwdriver with the same size as the axis.
As a result of looking at Net, I decided to buy a PB driver famous for Driver so that I can use it anyway if I buy anything.
The color of the part of Grip is beautiful and I personally like it, but as you saw on Net, it is quite dangerous. Will it disappear after a while? It is unknown whether it is like this forever.
Although durability is still unknown, well, if an amateur uses it to tamper the carburetor it will probably be the last one.
View detail
Since tools increase in number and it is troubled by storage, the Hex socket is working using a Ratchet combining the Adapters of a Bit and a Bit.PB is famous not only for a Driver but a Hex, and since it fits in firmly, the sense of security in the c
Since tools increase in number and it is troubled by storage, the Hex socket is working using a Ratchet combining the Adapters of a Bit and a Bit.
PB is famous not only for a Driver but a Hex, and since it fits in firmly, the sense of security in the case of work is different.
Although well compared with wera products, does it give the impression of wera which does not hurt its Bolt hole easily due to PB which is high-precision and has few [ it is difficult to rank, and ] crevices, and field contact using me for both?
Although it is a product which buys it and is satisfactory, the wera is cheaper in price and I have mainly been using wera recently.*one was lowered in
COSPAR.
View detail
Although he bought 5・6・8 mm collectively, since a using feeling is also good and solid especially these 8 mm, it is a Recommendation at the time of applying high torque, and Torque management (since it is not twisted).
Although he bought 5・6・8 mm collectively, since a using feeling is also good and solid especially these 8 mm, it is a Recommendation at the time of applying high torque, and Torque management (since it is not twisted). View detail
The TORX Driver of the 6400 Series Multi-craft grip is arranged to T6~T30. T6~T9 -- frequency in use -- Since it is hard to use for having in a Bit although it is small -- is that play an active part in Motorcycle maintenance T20.T25.T30? Altho
The TORX Driver of the 6400 Series Multi-craft grip is arranged to T6~T30.
T6~T9 -- frequency in use -- Since it is hard to use for having in a Bit although it is small -- is that play an active part in Motorcycle maintenance T20.T25.T30?
Although it tampers and there is no correspondence of a stop,
Since it is unnecessary especially in Motorcycle maintenance -- For the good barrel type Grip and me of the height of
Blade extremity end size accuracy, a Shank without the feeling into which straddle is likely to be effective and is likely to break, a tough Plating, a grip, or the torque transmission that becomes empty, he is the No.1 partner.
As a feature common to the
Multi-craft grip,
It is lost as it is used, although the surface is considering it as ザラッ at first,
If it stinks and the green of POZI is removed, all also of TORX, HEX, a Plus, and a Minus will be the orange form, and is the latest product a point with the thing peculiar [ at the time of a new article ] troubled by discernment although a Multi-craft also has printing of discernment in the hips of a Grip?
Since no less than 8400 Serieses with the Swiss grip of a round thin figure with cushioning properties can be chosen now [
], and it tampers, and there is an 8400B Series if a stop is required, it is dependent on liking.
View detail
The tool which was being used before has been broken at the time of right-hand side Heel-guard removal. The Socket should have been used in the portion which was using the Screw lock. The place which is not high torque has [ the L:00 Wrenc
The tool which was being used before has been broken at the time of right-hand side Heel-guard removal.
The Socket should have been used in the portion which was using the
Screw lock.
The place which is not
high torque has [ the L:00 Wrench ] a better use kitchen.
It began by the
friend's recommendation and purchased the tool made from PB.
It is light and easy to have.
Further, since the head section was 100 degrees, the Access to the place into which the
hand cannot go easily became good.
A place which sandwiches a finger is also improved at 90 degrees just for a moment.
Since
500 yen or more per are carried out to L character Wrench which can be purchased for about 2000 yen by a 2~12-mm Set and it is slightly high, they are four stars.
I think that it will be recommended if value can be found out in the
price.
View detail