Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The location of a grip falls, a degree of comfort and appearance also become good, and it is a case of killing two birds with one stone.
The location of a grip falls, a degree of comfort and appearance also become good, and it is a case of killing two birds with one stone. View detail
A tandem is not turned to even if it calls it a semi-double sheet. It is too narrow for carrying a load using a carry net. A problem is nothing to appearance and a degree of comfort. A car body becomes tight and he is smart. It being worri
A tandem is not turned to even if it calls it a semi-double sheet.
It is too narrow for carrying a load using a carry net.
A problem is nothing to appearance and a degree of comfort.
A car body becomes tight and he is smart.
It being worrisome when attaching is that a crevice is made delicately between YURUI, and a sheet and a tank as for tabling of the clip of a sheet front part, and the damper of a car body.
It is glad that the loading hook sticks!
View detail
Headlights were exchanged although it was a motorcycle beginner. He wanted for pure Wright to have seemed heavy and to make it slim touch, and purchased the lucas type (black). An easy instruction manual (it is not so intelligible for a beginner)
Headlights were exchanged although it was a motorcycle beginner.
He wanted for pure Wright to have seemed heavy and to make it slim touch, and purchased the lucas type (black).
An easy instruction manual (it is not so intelligible for a beginner) like handwriting is contained, and although time was taken somehow, it attaches and completes.
the hole which sweats blood (it was impossible in the pure service tool) to draw a cable in removing a top bridge since stay was also changed -- one -- (-- since an authentic positive one was three ), although it became quite tight, it passed along all.
after attachment -- an appearance refreshing -- it was decided exactly.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I think that sound volume is not too large so although it does not JMCA correspond. Individually, it is right just. He is quite gentle if compared with certain American one which is letting explosive sound roaring resound all over. Since it is
I think that sound volume is not too large so although it does not JMCA correspond.
Individually, it is right just.
He is quite gentle if compared with certain American one which is letting explosive sound roaring resound all over.
Since it is comparatively quiet at the time of idling, especially start up in the residential street also has no problem.
However, it is taking care that it does not make you trouble since sound is loud when load is applied on an uphill, the time of turning, and.
A carburetor is adjustment required in that which an omission says considerably.
although structure and a design are the highest, if they have the force of a sound side to a slight degree, they will come out, and are four star.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It purchased together with the slip-on 7R megaphone muffler of WM. There is what no inferiority also in the engine-performance target which is the touch which may be burned in the beauty compared with normal. Glow condition is truly pleasing.
It purchased together with the slip-on 7R megaphone muffler of WM.
There is what no inferiority also in the engine-performance target which is the touch which may be burned in the beauty compared with normal.
Glow condition is truly pleasing.
being burned in the exhaust pipe of normal, although he would like to change to slip-on muff forward-looking infrared -- the balance of condition or tone -- just for a moment -- in the direction currently considered, it is recommended.
View detail
I thought that the form of SR of a headlight case was thin in whether it is because former 縲?is pulling the flow of XT of an off vehicle, and whether it is a problem of cost, and it was wasteful to have broken a special nostalgic atmosphere. Such insi
I thought that the form of SR of a headlight case was thin in whether it is because former 縲?is pulling the flow of XT of an off vehicle, and whether it is a problem of cost, and it was wasteful to have broken a special nostalgic atmosphere.
Such inside exchanged the headlight case for the thing of the lucas type at last this time.
Coming exactly to the extent that it suspects for ? exchanged for this [ this ] attached, and felt first.
This thought that it was a normal state of being of SR.
It seems that it is missing now and acquisition is difficult although the thing made from a lucas was good according to the mood of the moment.
But it is large satisfaction now.
If there is a point which is worrisome for a while, the hole which draws a cable should just be [ the back ] somewhat large but, and unless it can enter in an order from a thing with a big connector quite carefully, it all is not settled.
Since there will also be no opportunity to remove very much well once it puts in, it is good.
View detail
Attachment is also easy. They are goods which those who enjoy nonchalant fashion can recommend to you.
Attachment is also easy.
They are goods which those who enjoy nonchalant fashion can recommend to you.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is very pleasing in design. Since an attaching part with a front fork is different and has become a low location, the tp of a fork projects and other ones have it. [ smart ] If it is not repairing briskly, a nut portion will rust. I want yo
It is very pleasing in design.
Since an attaching part with a front fork is different and has become a low location, the tp of a fork projects and other ones have it. [ smart ]
If it is not repairing briskly, a nut portion will rust.
I want you to use a stainless.
A bolt portion does not rust.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It attached to 94 models. - Strong point - and structure are solid, and there is a high grade feeling. - As for tone quality, crisp is good in bass, and comfortable touch is good also especially at the time of high rotation, without sound breaking
It attached to 94 models.
- Strong point - and structure are solid, and there is a high grade feeling.
- As for tone quality, crisp is good in bass, and comfortable touch is good also especially at the time of high rotation, without sound breaking.
- Setting in particular of the carburetor was unnecessary.
- Sound volume is comparatively large although demerit - and tone quality are good.
Although compared with the thing corresponding to un-[ JMCA ], sound volume hardly changes.
- Although it is JMCA correspondence, don't pass in an automobile inspection.
Although it was a high price, not having passed in an automobile inspection was fairly sadder than the thing corresponding to un-.
Those who do government-operated auto inspection had better take a normal muffler.
- Although the various mufflers till general comment - now had been tried, it was a congenial and powerful muffler.
I think the kana which it is not in the muffler most appropriate for SR with it being individual.
It may be cheaper to buy the thing corresponding to un-[ JMCA ], since it does not pass along an automobile inspection at any rate.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Appearance is pleasing and purchases. It was quite lightweight and attachment was also easy. Although sound volume is that it is large (it is worrisome for a while), tone quality becomes thick considerably low and is good touch appropriate for a s
Appearance is pleasing and purchases.
It was quite lightweight and attachment was also easy.
Although sound volume is that it is large (it is worrisome for a while), tone quality becomes thick considerably low and is good touch appropriate for a single.
Although run about 600 km after wearing, it is touch that a glow also entered finely and has adapted itself to the car body.
Running became pleasant.
^^
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
When a separate handle was used, since it had become lonely touch of a pure top bridge, this accessory bar was attached. He is foppish if it says at a word. Attachment is also easy. However, since each will interfere if the dummy damper knob i
When a separate handle was used, since it had become lonely touch of a pure top bridge, this accessory bar was attached.
He is foppish if it says at a word.
Attachment is also easy.
However, since each will interfere if the dummy damper knob is attached like me, it becomes wearing except the washer under a handle post.
I think that it plays an active part as point usage of a top bridge.
View detail
Fits: KAWASAKI Estrella., KAWASAKI Estrella.
Appearance is beautiful like a handicraft. There is good sound appropriate for a cabton also in sound. Since there is merely some exhaust leakage, I consider that it is better to use a liquid gasket. In an engine-performance side, I think that
Appearance is beautiful like a handicraft.
There is good sound appropriate for a cabton also in sound.
Since there is merely some exhaust leakage, I consider that it is better to use a liquid gasket.
In an engine-performance side, I think that rotation among low ~ went up [ torque ].
Although a weekend thinks that it is a good muffler which becomes pleasure, since the damper (rubber) of a center stand stopper is not attached, you have to place an order for or divert that authentic positive.
Since the product did not have a damper although it was ***** enough, it was made into ****.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Since it abolished an authentic positive one, texture is the highest although purchased for the supplement. Since it was aluminum, when it was lightweight and the polish was applied for a while, it came to shine. Since it becomes a color brighter
Since it abolished an authentic positive one, texture is the highest although purchased for the supplement.
Since it was aluminum, when it was lightweight and the polish was applied for a while, it came to shine.
Since it becomes a color brighter than a top bridge, difficulty seems to have floated a little.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
(Cling to the Peyton norton type muffler) Browned surface follows immediately after engine start, and it is quite color condition! Rather than the exhaust pipe of normal, blow going up of a high rotation area became good, and became light. -- The torque i
(Cling to the Peyton norton type muffler) Browned surface follows immediately after engine start, and it is quite color condition! Rather than the exhaust pipe of normal, blow going up of a high rotation area became good, and became light. -- The torque in a low speed area is also the touch which does not need to become thin too much. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It is a front fork cap of SR400. A rubber cap very easy [ attachment ] and pure is removed, and this product is only inserted in (according to a situation, a slotted screwdriver may be necessity). Since it is changed into aluminum from a pure blac
It is a front fork cap of SR400.
A rubber cap very easy [ attachment ] and pure is removed, and this product is only inserted in (according to a situation, a slotted screwdriver may be necessity).
Since it is changed into aluminum from a pure black rubber, I think that it is the best for a dress-up up.
O the handiness of good point and price, and x whose texture increases since it attaches and becomes easy (a tool is not needed -- it can do in & 5 minutes), and rubber -> aluminum -- to bad point and others,
it does not understand, unless it shows from outside -- only those who - understand understand - (too nonchalant) -- completely self-satisfied parts -- although it is evaluation of a five stars individually, since it is parts of a self-satisfied field, considering recommending it to people, it dares to become evaluation of four stars.
View detail
Cool!! First of all, it is there. Although it was a stability feeling, and he heard that it is not so reputable, I was hardly tired without knowing why. Calm for about 2 hours. if a minus point removes the rainy next day, is made reverse and i
Cool!! First of all, it is there.
Although it was a stability feeling, and he heard that it is not so reputable, I was hardly tired without knowing why.
Calm for about 2 hours.
if a minus point removes the rainy next day, is made reverse and it does not dry, the hips are alike wetly ...
Moreover, a tandem is also unsuitable.
Because it is slanting, the weight of tan DEMA will participate in the arm of a driver altogether at the time of breaking ...
View detail
It purchased by appearance serious consideration. When equipped, it became smart as expected. However, it seems that it is unsuitable for long-haul driving. (The hips become painful.) Water will soak from a knot and the back will feel cold, if
It purchased by appearance serious consideration.
When equipped, it became smart as expected.
However, it seems that it is unsuitable for long-haul driving.
(The hips become painful.) Water will soak from a knot and the back will feel cold, if it gets wet to rain.
I think the sheet which should just remove these two points.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
The separate handle was equipped with the top bridge for bar handles of WM, and this accessory bar was attached. (Daytona) When the top bridge for separate handles was attached, the key jumped out of the top bridge and it was uncomfortable. Runnin
The separate handle was equipped with the top bridge for bar handles of WM, and this accessory bar was attached.
(Daytona) When the top bridge for separate handles was attached, the key jumped out of the top bridge and it was uncomfortable.
Running out was canceled by attaching an accessory bar.
It is a cinch.
View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
Although attached with GB250clUbman, it is a very good article which builds and comes out and whose satisfaction is very possible. Although it worried at the time of the fender of aluminum, and purchase, considering measures, such as next rust, the pr
Although attached with GB250clUbman, it is a very good article which builds and comes out and whose satisfaction is very possible.
Although it worried at the time of the fender of aluminum, and purchase, considering measures, such as next rust, the product made from a stainless is too chosen from the fender made from aluminum.
Attachment was also easy.
View detail