Reviews
Replacement from another company's Rear suspension
I think the Level is satisfactory from city driving to touring in terms of quality, control performance, and ride comfort.
I weigh 65kg, I set the Initial setting slightly higher, and the damping force was set to the default setting. [2 The ride quality and maneuverability were Mild and good in the speed range of city driving and touring. When driving on highways, the damping force 3] I am thinking that it would be good in
View detail
I can see it in street driving.
I have only driven around town, but it is good. If I were to use an analogy, it would be like switching from a light truck to a Sedan. How about high speed driving? I am looking forward to it. (This is my personal opinion).
The look is a little more subdued now that Plating's Shiningly is gone. It is a matter of taste. Installation is no problem if you loosen the RightTandem Footpeg. It is a little long, so you need to put something under the Tire when loosening Both Sides.
View detail
It is a postscript. The details of the rear suspension of KYB can be checked on following HP. If the motorcycle with which the damper of http://www.kybclub.com/kybclubhtm/M-cycle.shtmlKYB can equip is owned, There is worth [ enough ] of a glim
It is a postscript.
The details of the rear suspension of KYB can be checked on following HP.
If the motorcycle with which the damper of http://www.kybclub.com/kybclubhtm/M-cycle.shtmlKYB can equip is owned,
There is worth [ enough ] of a glimpse!! The replace manufacturer by whom the details of specifications are indicated is a proof of reliance.
It is the proof which consideration of a user has accomplished.
A Japanese manufacturer's KYB is just the No.1 damper manufacturer of the world.
don't despise KYB -- ~!!
View detail
very good
The Corner ring is now much more stable than the OEM.
It looks good and is a good buy.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Top Bridge area is cleaned up.
I had it on in the Separate handle days.
It can be installed by replacing the OEM front fork cap.
Material:Since it is Aluminum, it is shiny and looks good even if it is just OEMTop Bridge.
good point
Peyton's parts are beautiful, just change the OEM rubber cap to this aluminum cap and you have a new motorcycle.
Easy to install.
It looks great on Cafe racer. Peyton's demonstration car is Cafe racer, so it looks good.
A bad point
Aluminum is prone to fogging and needs to be polished frequently.
Just changing the cap from rubber to aluminum will make the parenthesis better, and if you use an image, it will look more like a British car.
If you are looking for a dress-up, you can't go wrong with Peyton's parts, he knows the SR very well.
It's just a look.
Dress-up, not Tuning.
View detail
Reliable Brand
The design is also simple and ideal for SR. View detail
Increased rear rigidity
Although I didn't have a large complaint about the OEM suspension as I still have about 9,000km on the odometer I replaced it with KYB's Suspension, which was highly rated on the net
Installation was easy with the Center Stand, as you mentioned
My impression of the ride was that the changes weren't very clear at first But as I drove the car, it became easier to open the Axel at the start of cornering than before It's very nice Also, I gradually felt that the rigidity of the rear was increased and I felt safer than before It is
As for what I would like to see improved, it was also on Net, but DamperBody and Spring is rubbing and I hope it doesn't rub
It looks better and I'm glad I installed it (^^)
View detail
Rear suspension that does not interfere with the OEM Chain Cover
If you have socket wrenches and torque wrenches, you can easily install them
Stand on the Center Stand and replace the rear suspensions on one side at a time You can
Since it's for the SR400, my '19 has been able to use it without any interference with the OEM Chain Cover
The attenuation and pre-road can be adjusted to your liking, and more importantly, you can use it as a normal brake booster This is the peace of mind of Grip that is incomparable to suspension
Especially for the scary Normal suspension, which loses its grip at 100km on the highway I can't go back
View detail
It looks good
Maybe I'm being obtuse, but I don't know if it works that well
It just looks good in Parenthesis
Also, I'm worried about Spring hitting the inner body and getting Wound
We recommend it for those who want to finish the rear suspension
View detail
Curve is easy to bend.
I'm obsessed I understood that Curve became easier to curve. It is very easy to bend and driving is fun (^^)
Although it was written even in the previous Review, since Front fork is still old, it got to understand the previous flavor very well ....
It is Front fork next time I save the gold.
View detail
This is good !!
Custom for Motorcycle Rear suspension for the first time. Even such a me can afford to install!
Although it was an exchange with emphasis on appearance, when it gets on, it gets better than expected performance Big Ri! I can understand that even my amateur's ride improved. I do not know expert things at all but Motorcycle started to run suddenly!
it's recommended. (It is because four stars do not know the best)
View detail
Ah ~ surprised
I have been thinking that Suspension is also this kind of thing, because I thought that it was a taste of continuing to ride with almost NORMAL for 30 years and riding difficulties.
Recently I have something to think slightly, I start messing with a bit of details, finally to change Rear Suspension.
At first I was thinking about making it a bit cheaper but if you change yourself from long ago I made this product in the middle price range of this Manufacturer with high credibility.
After installing and running, I was surprised. It's going to be stable so long running straight. It is the same to turn. The sense of stability is completely different.
I understood the difficulty of getting Normal suspension again.
Also, a long time ago, when I added the KYB's Rear Suspension to another Motorcycle, I had a pretty solid impression, and this product was also prepared for that kind of thing, but it was a completely uneasy feeling. There will be Setting, but it is just good for me.
Almost similar Spec. There is also a cheaper Suspension of. Perhaps the performance does not change much, this is total material : By thinking of Aluminum, it seems that the texture is quite high.
Well, where would you like to go with the easy-to-ride SR.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Exchange from OEM's Rubber cap
It is an exchange from OEM's Rubber cap. It is easy to replace it because it just removes and installs the Rubber cap. However, as the other person says, as there are traces of shavings left, I polished the surface with a fine sandpaper with eyes and polished before installing it. It is recommended because it looks very good when combined with Aluminum's Top Bridge!
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Peyton PlacePeyton Place Front fork
The work itself is easy as it is exchanging with OEM's Rubber cap. Listing is also casually listed. I think that it is okay if the price is cheaper - - -. View detail
Very satisfied
I did not think it would change so much by changing Rear shock.
I thought that the ride comfort of the rough road would be better, but it seems that it was not such a udon.
Especially the feeling of security of Cornering has improved UP.
I see. I thought.
View detail
Probably, it is a masterpiece. the texture of an Aluminum, and the engine performance -- it is perfect. There is no dissatisfaction in town riding. The subduction at the time of acceleration is also lost, and a Torque comes to ride firmly, and the burd
Probably, it is a masterpiece. the texture of an Aluminum, and the engine performance -- it is perfect. There is no dissatisfaction in town riding. The subduction at the time of acceleration is also lost, and a Torque comes to ride firmly, and the burden on the waist also decreases. It is a Motorcycle which is tiring as SR. I think that the cause is a Rear suspension. It becomes very easy to ride gently. I would like to carry out the Recommendation of this to a masterpiece and all the town riding SR riding. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Attachment did not start but it ended it as long as 3 minutes. Even if it attaches, he is noticed by nobody, but the circumference of a Handle became tight and it is very much satisfied.
Attachment did not start but it ended it as long as 3 minutes. Even if it attaches, he is noticed by nobody, but the circumference of a Handle became tight and it is very much satisfied. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
First, it is the charm which can be purchased with budget prices. Although the attachment itself is easy, power is needed very well.
First, it is the charm which can be purchased with budget prices.
Although the attachment itself is easy, power is needed very well.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Since it abolished an authentic positive one, texture is the highest although purchased for the supplement. Since it was aluminum, when it was lightweight and the polish was applied for a while, it came to shine. Since it becomes a color brighter
Since it abolished an authentic positive one, texture is the highest although purchased for the supplement.
Since it was aluminum, when it was lightweight and the polish was applied for a while, it came to shine.
Since it becomes a color brighter than a top bridge, difficulty seems to have floated a little.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It is a front fork cap of SR400. A rubber cap very easy [ attachment ] and pure is removed, and this product is only inserted in (according to a situation, a slotted screwdriver may be necessity). Since it is changed into aluminum from a pure blac
It is a front fork cap of SR400.
A rubber cap very easy [ attachment ] and pure is removed, and this product is only inserted in (according to a situation, a slotted screwdriver may be necessity).
Since it is changed into aluminum from a pure black rubber, I think that it is the best for a dress-up up.
O the handiness of good point and price, and x whose texture increases since it attaches and becomes easy (a tool is not needed -- it can do in & 5 minutes), and rubber -> aluminum -- to bad point and others,
it does not understand, unless it shows from outside -- only those who - understand understand - (too nonchalant) -- completely self-satisfied parts -- although it is evaluation of a five stars individually, since it is parts of a self-satisfied field, considering recommending it to people, it dares to become evaluation of four stars.
View detail