Reviews
Picture up was carried out.
Picture up was carried out. View detail
It looks great!
I attached it to the FI of SR 400 but please remove the Fuse box and submerge it under Instruction Manual. ... Although it was written, but I can not take out the Fuse box so I added Seat as it is and attached it without problems!
Fitting has no problem! I do not do graffa! It looks good Parenthesis Goods that can be Recommendation well.
SR is carburetorSpec. Although there are many seats, FISpec. I have a hard time finding, but I bought it properly but I am satisfied with Large.
View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
It is Stylish.
WM's Aluminum Fender that was attached to GB 250 has been choosing this sturdy Stainless Steel's product as it has been recessed with Aluminum corrosion.
Truly made by Peyton Place, the Fender section is polished to Polished and has good accuracy, so it will not be troublesome to install.
However, attachment Bracket part of both SIDE is made of Aluminum board, and it is easy to scratch by rubbing with Fork during installation, so it is necessary to be careful. In case of myself, I applied Masking tape in advance and prevented it.
Also, although the mounting hole is vertically long, it was a bit disappointing to see the processing trace like the hole opened with Drill was extended by File. Well installed, it is not very noticeable.
View detail
The Image which carried out Aluminum-Tank wearing was suited. It is a favorite. I would like you to improve structure and the Fitting on the Seat-base back side to a slight degree. . .
The Image which carried out Aluminum-Tank wearing was suited. It is a favorite. I would like you to improve structure and the Fitting on the Seat-base back side to a slight degree. . . View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
Bar who does not spoil a Design sticks and it finds it useful in a load Hook or a Tandem. It is an excellent piece which combines fashion and practical use. Texture is also very best.
Bar who does not spoil a Design sticks and it finds it useful in a load Hook or a Tandem. It is an excellent piece which combines fashion and practical use. Texture is also very best. View detail
Although attached in exchange for the NORMAL, it became good with the guide peg and appearance also became smart. It is unsuitable for , however a Tandem, and a person in behind slides to a front at the time of a Brake.
Although attached in exchange for the NORMAL, it became good with the guide peg and appearance also became smart.
It is unsuitable for
, however a Tandem, and a person in behind slides to a front at the time of a Brake.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
SR400 was equipped. Since the sheet was a thing made from a Peyton Place, the die length of a Fender is right just. Since the form of the Fender has shifted a Frame and a little although others are also merely contributed, attachment is quite
SR400 was equipped.
Since the sheet was a thing made from a Peyton Place, the die length of a Fender is right just.
Since the form of the Fender has shifted a Frame and a little although others are also merely contributed, attachment is quite serious.
Although he did his best to the middle, I asked of the store eventually.
Wiring of a Tail lamp is extremely short after
.
I got the store to make an extended Harness also about this affair.
After
.
It equips, although it is a phenomenon in which the Stay which the direction of others has contributed breaks, and as of about three months, it has not been divided yet.
Although
appearance is the highest, it is attached, and it is four stars regarding a Harness.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The Tank a Back step, Single seat ?, YOSHIMURA ST-1 Cam, and BSA type and Peyton's HALF COWL were supplied. It does not result in completion in Fine tunings, such as air-intake-and-exhaust port polish, now. Especially, Peyton's HALF COWL is too smart and
The Tank a Back step, Single seat ?, YOSHIMURA ST-1 Cam, and BSA type and Peyton's HALF COWL were supplied. It does not result in completion in Fine tunings, such as air-intake-and-exhaust port polish, now. Especially, Peyton's HALF COWL is too smart and completion is pleasure. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since it becomes quite small compared with normal, appearance feels it refreshed. The point needs to keep in mind that fixation of the kana ? meter cable connected also with a weight saving becomes impossible. The impression changed considerably o
Since it becomes quite small compared with normal, appearance feels it refreshed.
The point needs to keep in mind that fixation of the kana ? meter cable connected also with a weight saving becomes impossible.
The impression changed considerably only by changing a front fender.
effective, although it is not cheap -- it came out custom and carried out.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The touch attached although time was taken a little in attachment is large satisfaction. It is preeminent also for an effect. A difference comes out by high speed operation.
The touch attached although time was taken a little in attachment is large satisfaction.
It is preeminent also for an effect.
A difference comes out by high speed operation.
View detail
A tandem is not turned to even if it calls it a semi-double sheet. It is too narrow for carrying a load using a carry net. A problem is nothing to appearance and a degree of comfort. A car body becomes tight and he is smart. It being worri
A tandem is not turned to even if it calls it a semi-double sheet.
It is too narrow for carrying a load using a carry net.
A problem is nothing to appearance and a degree of comfort.
A car body becomes tight and he is smart.
It being worrisome when attaching is that a crevice is made delicately between YURUI, and a sheet and a tank as for tabling of the clip of a sheet front part, and the damper of a car body.
It is glad that the loading hook sticks!
View detail
Cool!! First of all, it is there. Although it was a stability feeling, and he heard that it is not so reputable, I was hardly tired without knowing why. Calm for about 2 hours. if a minus point removes the rainy next day, is made reverse and i
Cool!! First of all, it is there.
Although it was a stability feeling, and he heard that it is not so reputable, I was hardly tired without knowing why.
Calm for about 2 hours.
if a minus point removes the rainy next day, is made reverse and it does not dry, the hips are alike wetly ...
Moreover, a tandem is also unsuitable.
Because it is slanting, the weight of tan DEMA will participate in the arm of a driver altogether at the time of breaking ...
View detail
It purchased by appearance serious consideration. When equipped, it became smart as expected. However, it seems that it is unsuitable for long-haul driving. (The hips become painful.) Water will soak from a knot and the back will feel cold, if
It purchased by appearance serious consideration.
When equipped, it became smart as expected.
However, it seems that it is unsuitable for long-haul driving.
(The hips become painful.) Water will soak from a knot and the back will feel cold, if it gets wet to rain.
I think the sheet which should just remove these two points.
View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
Although attached with GB250clUbman, it is a very good article which builds and comes out and whose satisfaction is very possible. Although it worried at the time of the fender of aluminum, and purchase, considering measures, such as next rust, the pr
Although attached with GB250clUbman, it is a very good article which builds and comes out and whose satisfaction is very possible.
Although it worried at the time of the fender of aluminum, and purchase, considering measures, such as next rust, the product made from a stainless is too chosen from the fender made from aluminum.
Attachment was also easy.
View detail