Reviews
Fits: KAWASAKI D-TRACKER125, KAWASAKI KLX125
Even the Fender Eliminator was Large sturdy.
I was worried about interference with the Fender Eliminator Kit, but I was able to attach it safely.
There is no sense of limit, so it can be installed with any Fender Eliminator Kit.
High Quality and Satisfaction.
View detail
Fits: KAWASAKI Z900RS Cafe, KAWASAKI Z900RS
BlackExhaust System
Full Exhaust System is a long-awaited project.
The volume was louder than I expected, and I wondered if it was strong enough to withstand a large vehicle inspection. I felt that this is a sturdy car inspection large.
It also comes with Gas repo, so I think it is Large sturdy. It is precisely made and fits tightly. I did not need liquid gas.
Instruction Manual is included, but if you are a beginner in replacing the Exhaust System, it may be difficult to know which one to start from even if there are numbers on it…?
I feel that mid to low speed acceleration has improved!
View detail
ท่อ over racing cabon ทรงสวยเสียงนุ่มขับขี่สบาย เสียงไม่ดังมากจนเกินไป เหมาะสำหรับคนไม่ชอบเสียงดังมากอันนี้ผมอนะนำเลยครับ View detail
ชุดท้ายสั้น over racing monkey 125 สวยสมยี่ห้อ ราคาพอรับได้ ถ้าสูงกว่านี้คงต้องไปยี่ห้ออื่น ใครมองหาอยู่จัดเลยครับ View detail
สวิงอาร์มหลัง over racing ชิ้นงานสวยงามตามยี่ห้อ มองดูแน่หนาดีตัวดามล่าง View detail
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
I want it to be attached from the beginning.
I wish it came with me from the beginning….
Without it, it looks cheap….
View detail
no doubt
Rear Sets by OVER is still a good product. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR
No complaints!
Introduced because the position of the Normal step did not match my feeling.
A Reverse Change Kit was also installed.
Very solidly built.
Every single operation is tightly decided and small and spooky.
It is easier to drive.
I am Large-satisfied with the look, build, and feel of all the controls.
I asked the Dealer to install it.
View detail
OVER RACING Rearsets
Everything fits well Tooks around 3 hr to install. The instruction was ok just takes sometime to translate and look at the pictures carefully to know where all the spacers and bolts goes. i would recommend if you like more sporty style and foot position toward the back, View detail
The silver subframe looks great.
I considered the black color, but I chose silver.
The side view is even better with the subframe shining.
The finish is excellent. There was almost no processing error and it seemed to be worth the price.
When installing, note that the bushings entering the frame are different on the left and right.
I thought about it before buying, but I have no regrets. -------------------------------------------------- -------- I considered the black color, but I chose it as a silver. The subframe is shining and the side is even better. The deadline is excellent. There was almost no processing error and it seemed to be worth it. Be careful to install the bushing that enters the frame when installing is different. I was worried before buying, but I do not regret it. Powered by Google Translator
View detail
I'm still glad it was Over.
There are many videos on installation, so I think it will be relatively easy to put it on by watching what you are doing.
I also installed Moto69 man's Rear Brake Spring.
The most difficult part was the position on the Gear changing side.
The optimal position was achieved by making the change rod slightly longer and by moving the footpeg position backward. However, if the change rod is too short, the shift pedal will face upward too much and the ankle will hang up during downshift.
I would like to make it longer if possible, but I am concerned about the strength of the ROD because the screws in the change rod become too shallow.
Well, I am satisfied with the ability to shift change normally.
As for the footing, it has become so easy that I look forward to waiting at traffic lights.
I should have replaced it sooner.
View detail
My first luxury Suspension
New ModelKATANA friends are now using this suspension from OHLINS.
I heard about the replacement, and when I looked into what kind of product it was, it was miraculous.
I told everyone I knew about it, but no one would buy it, so I bought it myself, and it took me eight hours to install it.
Four of those hours were at the Normal muffler, which I didn't have to do.
Remove from under the Normal suspension Swing Arm.
This product was not inserted from the bottom because the Biggie Pack was in the way, but it was easy to insert from the top.
I think they work well with my current QuattroCORSA shoes. I only use them for touring, but they are comfortable to ride and stable even at full throttle during corner rings, even with Tracon 3.
It may not be cosmetic as custom parts because you can't see it unless you look at it from the back, but as practical parts, it is highly evaluated.
Inner fender is NORMAL, so it is dirty, so I made my own Cover.
I'm putting it on.
I guess I'll have to buy a long inner fender next.
View detail
Rear Sets with excellent cost performance
Purchased for Position optimization purposes. If you are uncomfortable with the footpeg position even a little, I recommend purchasing this product.
It is quite easy to Hanging on and improves Sports performance. The quality of the product is also high and highly satisfactory.
Compared to the OEM, the rattle is almost gone. It has a solid feel.
The Shift side is easy to install, but the Brake Side is quite large and requires some adjustment of the Brake hose direction,
I struggled for about 3 hours with removing the Bracket.
The Reserver tank will also be relocated, but the Reserver Hose is still OEM and the angle of the tank is poor.
I will replace the Hose one of these days.
View detail
The best!
I really wanted to install a 5 cm long swing arm, but the small size was too small for me, so I decided to use the standard size.
The ride feels good.
In terms of work, I was able to install it even as a novice.
View detail
OVER Racing ?
First of all, I wanted one just by looking at the photos of the presentation, so I placed an Order that day!
I waited over 2 months, but when I received it, opened it and picked it up, I was Large satisfied with the quality of the finish and rigidity.
When installed, it has a luxurious feel and surprises everyone who sees it.
I think it is over-quality for the CT125, but I am glad I purchased it just because I am more than 100% satisfied.
View detail
For peace of mind.
Purchased the product because it was equipped with Over Rear Sets and Sliders.
The sense of unity has been improved by matching the logo,
The product was easy to install without being too subtle, and it was easy to install, but I applied a little Locktite just to be sure,
View detail
Standard modifications
Silver is cheaper but the color MATCH feeling is Black.
The person wearing it is Large body Polished aluminum.
Matching good with Engine Black.
Quantity:Pair (for Left and Right) Note that the color thickness of the "Color Thickness" is not the same in some areas, so be careful when installing the product.
The sub-frame per-frame surface will float.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Standard
I added a sub-frame, so this is the only choice.
We decided on this without any hesitation.
The color is Black if you choose Black.
View detail