Reviews
Fits: HONDA CB1100EX, HONDA CB1100RS, HONDA CB1100
For CB1300SB
The reason why I bought it is because I started to feel hand strain due to my age when touring more than 300km, and also because the size 16Φ or 17.5Φ Radial master that I wanted was too expensive for me to afford (laugh).
There are about 4 companies with similar products, but we chose this one because the OEM parts number was the same for CB1100 and 1300 (SC54), although it was not in the list of compatible models. After the exchange It's dramatically lighter." I would like to say that it is a good thing, but perhaps it is because of the Brush-boost effect of the exchange. "Slightly lighter?" I got used to it as soon as I started running, and to be honest, it was a bit of a challenge. It's not that different. the impression that
Clutch master is also about OEMs, Meet Point I think I'm getting a little ahead of myself." I got used to it very quickly. It's not that different. Spring is the only thing that can pull it off. So much lighter!" and I just posted a picture of it, what you see with your eyes and what you actually hold in your hands. Light/heavy." Since each person has his or her own sense of Disappointing. I am sorry to say that I did not use this product. If you are looking for a dramatic change, I think Radial master (note the size) is more Large in effect.
I bought the product in Black Anodized Finishing (I thought the color didn't matter because I couldn't see it, but it's actually cool and has a nice texture).
View detail
Fits: HONDA CT125, HONDA DAX125, HONDA SUPER CUB C125
ct125CT110 HUNTER CUB
It looks cool, but it doesn't seem to be very effective. View detail
Nice parts but
Beautiful piece from Over racing. Fits perfectly in place of the original cover. Gives a beautiful and slimming look. but unfortunately if you have a small saddle like me then there is a space between the cover and the frame. View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250
good item
Riding the Rebel 1100 raises the position of the uncomfortable steering wheel high. It's a great item because you don't have to change the steering wheel and you don't have to change the cable. It's just too expensive. View detail
Well, yeah.
I don't like that the Bolt on the Front side can have a little gap.
It is recommended that two Jacks be used so that the Engine does not Gap.
I don't like the point where the Bolt paint peels off with Wrench when tightening.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F
I'll never roll over …
I don't want to be in the care of this guy. View detail
Can also be used with OEMExhaust System
The photo is in Black, but please keep in mind that the Lineup is only Silver at the time of posting the Impreza.
The only color available was Silver, and I wanted Black to match the Frame, so I made the following inquiry to OVER.
Q.Are there any plans to manufacture Black
→A. None.
Q.Is it possible to make a special order for Black?
→A. Acceptable at the time of remanufacturing after the current stock is paid out, but the timing is undecided due to the large current stock.
At the end of the exchange, I was referred to ReAnodized Treatment to Coken, which I used.
The cost at my time was 10,000 yen.
If you do not tandem and do not use a loading hook, you can lighten the weight somewhat by replacing the hook.
The OEM Exhaust System can be used, and of course the OVER Exhaust System can be used, but the OVER Swing Arm is a little thicker and the clearance is not so good, so we added an extra 4mm to the collar that comes with the OVER Exhaust System. The OVER Exhaust System can of course be used with the OVER Exhaust System.
The screw threads of the Bolt for fastening the Exhaust System with Bracket remain more than 1cm, so if you are concerned about it, you may procure just the right length yourself.
When fastening the Tandem Footpeg to the Frame, it is recommended to apply a medium-strength screw lock agent.
View detail
Fits: KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Why so much?
It is good that it can be mounted on either the top or bottom, and it is well made, but it is disappointing that you have to shave 4mm off the circumference of the Brake Pads, so MinusPoint View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
cool
Even novice mechanics can install it easily as it is completely Bolt On.
After installation, the only thing I noticed was that the Wiring in front of the Sprocket is exposed.
Other than that, I'm satisfied!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
I made a mistake but …
The product itself is a Simple Design, but it is solid, easy to install, and very good.
My own evaluation is that it is different from other Parts by Manufacturer, and I am replacing it with a new one.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Installation Smooth
I bought Slider for now with the intention of installing a sub-frame later.
Installation was easy.
I'm thinking of combining the Slider system with the Rear Sets since I'm also using Over.
I wish the price was a little lower.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR50, HONDA NSR80, HONDA NSF100
Expectations were not exceeded.
Looks are everything.
I set it to Hub damper, but I would have preferred not to.
3.5, but Tire is limited.
The cleaning is LARGER strange than I thought it would be.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA NSF100
It looks good
Compared to the OEM, it looks better, so it feels more customized!
When assembling with various external parts, 2.5 is definitely better.
View detail
Reinforcement of footpeg mounting base is needed
The shaft hole machining on the Tandem Footpeg is a 6mm hole only on the Left Side, so the 8mm shaft of the OEM footpeg could not pass through.
Is it a processing error?
The included spring for the stop-lamp switch was too long to use, but for some reason, the OEMSpring worked fine.
The footpeg is the first point of contact with the road surface when it is used in MotoGymkhana and falls down, but when it fell down, the base of the footpeg was not strong enough and the seat surface caved in. However, if the seat surface is damaged, it is beyond the limit of on-site repair. I thought it would be better not to have footpeg position adjustment holes to ensure strength.
The machining accuracy seems to be high except for the machining error areas.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300
Brake Side is more difficult to install
It is difficult to adjust the fit of the Brake Sidefootpeg with the Cylinder and the length of the Spring.
It is said to be difficult to begin with, but it was crazy difficult compared to when we installed Babyface products before.
The Instruction Manual is also simplified, and the installation itself is more difficult if you do not have experience in replacement and an understanding of the structure around the footpeg.
The look and Position are perfect.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
It is attached to a sub-frame.
I purchased this product because I needed to remove the babyface slider when I installed the sub-frame. There are no special features, but the atmosphere changes when installed with a single body or with a sub-frame. z900rs Radiator size has changed since 2021 model year, so be careful when you purchase it. The Radiator is now very powerful looking with the Sub-frame. View detail
high
The footpeg that comes with OverRACING's Rear Sets Kit was bent in a fall, so I bought it. (especially Shoes slipping) It is quite expensive, but I bought it. View detail
Subtle…
I used it with SP Tadao's Exhaust System. For some reason, it went inside the Tandem Footpeg and interfered with the Swing Arm, so I used a 20mm Spacer to let it go outside. View detail
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50
back step
About quality and texture There is definitely a feeling that it is not fixed About the feeling of use I like the location of the steps Products to buy together Over Racing Side Stand Holder , ape50 side stand Difficulty of installation It took a long time to set the drum brake Cost performance and comparison with other products I think I have the best position among the back steps for drum brakes About shipping and packaging It took about a week Any concerns, cautions, or advice when purchasing If you press the rear brake with the back step, it feels like the return is not working well View detail
Fits: HONDA CB1100EX, HONDA CB1100, HONDA CB1100RS
Honestly, it's subtle…
The quality is fine with Aluminum Cut-out, but the effect is not as good as I had hoped...
I replaced it with Mesh hose, so I can feel the difference in Touch, but I honestly don't know if it is lighter.
The Piston diameter has become LARGER, so it must be 10% lighter! I decided to assume that it was 10% lighter than before.
View detail