Reviews
Easy Rear Sets
good point :
I do not need machining of vehicle Frame!
Looks good, texture is good!
A bad point :
As it can not be helped, there is no collapse mechanism like OEM
In some cases, Brake pedal touches Crankcase (Individual vehicle difference?)
It is reference information,
When equipped with a manual clutch on a 03-05 year vehicle,
Shift shaft may be 0 -, so we recommend purchasing after checking Shift shaft's warp!
Shift's tip Parts (Gold sexy Parts) Because it will be about 5500 yen with Single Body, if you make a mistake in purchasing it will make Wallet hurt (Lol) (Experiences)
View detail
It is really cool!
In putting Rear Sets into ZX - 14R I was worried a lot from selecting Manufacturer, but finally it settled on OVER made w
I think Design is the best as a reason for choosing.
This Design and Black color is very cool in 14R.
Relar Sets are relatively popular, although Gold is often chosen as a fairly gaudy one, Black is also tightened and recommended.
Also, the original operability of Rear Sets is already pat!
Since there is no driving schedule Kill, it is more perfect than what the height is like, a feeling of security when you put your feet, a feeling of click when changing your Shift, and the ease of adjusting Breaking input!
I think that I can not quit stopping people who think that I do not need a bank angle so much w
View detail
It is easy to attack, it will be easy.
Position, coupled with K & H's High seat, became very satisfying.
Although the installation itself is not a problem, Bracket's hook on Brake switch's Spring
The engagement of Screw was very shallow and the female Screw became stupid when adjusting the angle.
Two other mountains thought that they wanted to enter, and it was a place where it was Large and no force was applied,
It's a disappointing point, is not it?.
Others, texture - Strength - As assembling accuracy etc. think that there is a reasonable price,
There is no possibility either.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA YZF-R3
Satisfied (*^^*)
Position was a bit cramped and I wanted a presence at the foot as well so I bought it (^^)
Although I did not have any settings, I decided to contact Manufacturer as I can install it as a reply.
Because I got without processing, I am relieved (* '∀ `)
View detail
Only legs motivated Position
Used with OEMHandlebar
Because the knees slip better Tank Pad should also be included
I wish I could be in reverse Position
Pedal position that does not delicately delicate to itching
But OVER so satisfied
View detail
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50
It is worth buying.
There is no particular problem with packing and it is good.
It is very beautiful at Level who is hesitant to use as a footpeg though it is an appearance. I think that the engraving of over can also be fine.
There was nothing troubles especially troublesome because it is outstanding in installation. I use Hexagonal Wrench when attaching Stepte Body to the car body, but I think that it will be closed securely if there is a longer Hexagonal Wrench.
The feeling I used may be individual differences, but my APE was sluggish for GEAR's entry and from time to time I left GEAR missing or N potatoes, but since I changed it to this, GEAR There is no concern about entering ScauperScauper at all. Position is not stupid but familiar to nature and body. Even if you take it to the pass "Is not it even possible?" There is no anxiety like Normal step like it is. Also, because the height of Change Pedal can also be changed, it is also recommended for those who did not agree with NORMAL. The movement of the moving part of footpeg is also good with Smooth.
It is also used in conjunction with Beams's ss300Up Exhaust System, but if you do it too much, the rear end of Brake pedal will interfere. If you adjust the angle of the Exhaust System the Large is durable.
The only complaint is the price but it is price. It was hard for high school students. Let's do our best and let's do it byte (Lol).
View detail
Eliminate dissatisfaction with PedalPosition
I replaced the footpeg of SP Mukawa river and lowered the position of footpeg a little bit but I felt that something slowly did not come in while I was on board.
It is good to be able to install just by replacing footpeg and Pedal.
Instruction Manual is also polite and easy to understand.
The feeling of use is now called evaluation, but if I felt a ride after installation, I felt that both Pedal's operations could also be made Smooth.
View detail
Bolt-on is good
Instruction Manual was easy to understand.
Making was also beautiful, easy to work and installed without processing.
Regarding Position, you can ride naturally without becoming cramped.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
It became favorite Position
OEMRear Sets of ninja 1000 exchanged just because it hit the place where the foot was lowered at the time of the signal stop and it got out of the way and rubbing the footpeg by removing Knee Slider in Circuit running.
Position's choice is for ABS compliance? Large Although wide adjustment does not work, trying on the Large Back & Up, it's quite nice feeling.
The point I was concerned about is that expensive play has been increased through Gear changing through LINK and the parts order at the time of breakage is expensive as it is an Assy unit It is.
If OVER is concerned, it would be greatly appreciated if you could consider the above in the future.
View detail
Change to Sporty Position.
NORMAL's Footpeg Position is too far forward, I have to hold Handlebar to support my body
Middle (Hit the buttocks) Purchase because you can not take a posture.
As an aim ◎. I think that such a person is few in this vehicle, but those who want to sleep at Hanging on
It might be better behind the footpeg position. As you are told, the calf interference at stop
It will be improved.
Product delivered in semifinished state. I did all the Rose for confirmation but it was not a temporary set of Yuruyur, the assembled part was
It seems that it is tightened by prescribed Torque, it is OK with mounting as ordered.
It is easy to delete in Rear Sets Kit, troubled by Ring Better later, Return spring
Also kitchen equipment. End part of Rear master (Connection part with Pedal) Also use NORMAL parts.
Pedal's MASTER receiving side (Shaft) Also Material : Stainless Steel secures strength.
Change / Brake pedal It seems that waterproof is not also on rotating shaft, but Seal bearing is used
Well-established place.
The upper surface processing of the footpeg itself is good at the Grip of the sole's foot well, but Boots and Riding shoes
If it is RubberSole it seems to be exhausted quickly.
What I wanted to devise, if possible,
Like the car model, the Step plate instead of Rigid, like NORMAL, make it a 3 point supported Rubber mount
To avoid the Frame interference of the change rod and change rod, Change Pedal slightly goes outward to the outside
Things that have been done.
View detail
Normal footpeg
07 think that there are many people who think that footpeg is too far in front. Bad place of the place, hit the calves at the time of stopping, under the feet when accelerating (footpeg) I could not step on with, etc actually ran to some extent and I felt it was difficult to use, so I step on purchase. Rear Sets is also expensive and I did not mean to change it unless I felt necessity, but I think 07 is too bad position. After exchanging, the position of footpeg is not particularly feeling that it became Back, it is feeling that it returned to the normal position. Also, during acceleration, you can firmly step on the body behind with the soles of the feet, making it easier to feel the feeling of Rear tire's grip on the sole. It's not too flashy, (Silver) It is a good Accent for 07 where there are not so many lights, and I think that it is a part with reason to change only for 07. The position of the footpeg is used on the rear lower side, but there is no particular dissatisfaction at this position.
You can move one step further but you can not change it unless you change the position of footpeg after installation by removing Space like Hexagonal Wrench or temporarily releasing it or loosening Screw and securing a space to enter Wrench , I use it in this position.
By the way, I think that some people are worried that the connection between RearBrake lever and MASTER will interfere with the Exhaust System, but in my case it is Tadao's PowerBox but Clearance is secured. However, although it is about several millimeters, it is not enough to touch it.
On my own, it is one of the Parts I got quite satisfied with swapping.
View detail
There is a sense of affinity.
【What made you decide the purchase?】 Required
First of all, the price was cheap.
The position which can be selected compared with Racing Koshien's Racing Footpeg was close.
【How was it actually used?】 Required
Large I do not feel a problem, but the position where my feet are standing Anodized Processing has disappeared, the ground has gone out. Although it is still about 500 kilometers in use - - - Is it a problem with footpeg shape - -
Also, it is difficult for the heel to touch the Foot Plate depending on the selected position of Position. Although it may be a problem of individual differences it was regrettable.
【Was it difficult to install? (Hard parts case)】
The Instruction Manual was polite and it was installable without problems. You can do it with tools and time.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I think that the problem will be FootBrake side, the other side of the photo.
I think that working time will change depending on whether the operation switch of Stop-lamp works well.
Let's keep in mind that when adjusting the footpeg hits Frame it will easily scratch both sides. Also, because the Stop-lamp does not turn on temporarily, Large is not dangerous !!. You can also say that Lamp will come on when Bolt is fully tightened - - - I am also careful here.
While performing temporary tightening while looking at Balance by temporary tightening, Large is a Parts that may be strange if you forget to close.
We recommend that you work with plenty of time.
It is ant to ask Motorcycle shop, but I think that it is better to be able to adjust each part How about trying Challenge.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
As described above, durability - Shape of Foot Plate
Is it about?
【Hope for Manufacturer - Please let me know if you have any improvement points]
Personally, I think whether Manufacturer logo insists too much. Even if Black is selected Logo is Glaringlyw
Also like Frame "Matte Black" I think that it is best if it becomes.
【Have you compared items?】 Required
If it is on Catalog, FOR JAPAN MODEL's footpeg compares the change position.
[Others]
Comprehensively I think that it is a good product.
If it is FOR JAPAN MODEL Manufacturer, Repair Parts etc. are not troubled.
View detail
Position is good
Bolt and Nut connecting Shift rod and Shift Pedal were out of stock. We soon got to thank you Big's quick response.
Since it replaced it with Seat of Lowdown, it turned out too early in Normal step and it was coloring Rear Sets.
I also thought about cheap imports, but again, it was over and it was correct. It was installed without any particular difficulty
The disadvantage is that there is only a few millimeters between the protrusion of Joint of Brake master and Swingarm. I think that it is because it is substituting for a cheap Swingarm, but I am worried that it will hit someday.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
Motorcycle is another thing!
The footpeg feels just under the sitting position close to the off car, the upper body is faced down in front of it, so the lower body became cramped as I got used to running on this vehicle. Also, OEM's Brake & Shift Pedal looks cheap, it is quite rashy, rattling and rigid without feeling (Plate type was good if it did not exist) That is the reason for the exchange.
In selecting, we want to avoid extreme changes, the price is Reasonable compared to other companies, there is supply of Replace parts, OEMBrake switch & Hose can be used, Of course Design is superior, and Handlebar will be developed at the same time What has been sold, and more decided.
In assembly, the margin of Hose length is reduced and OEM's Bracket can not be used. I fixed it with Tie Wrap using Screw hole after detaching Bracket. Reserver is OK. Brake switch and return spring hanging parts fixed Bolt was delicately long (Screw hole shallow) So, I deleted Bolt's tip a bit with File. Fixing footpeg It is hard to put Torque on Bolt, so the change side got relaxed and surprised at test drive. By fixing footpeg side as Nut, it is not loose after that. Instead, I fixed it a number of times to align Pedal's orientation.
Position was set to 30 mmBack, 30 mm Up with the least change. There was a feeling of incompatibility in the exchange of One Side, but I felt little after replacing Both Sides. The operation feeling of Pedal is wonderful, I think that just this alone is worthy of exchange. Unlike the car's black, the color does not assimilate because there is Blue.
In traveling, I am banking obediently so that it can not be thought of as the same car, I feel like I'm bent freely, I did not even become aware of the weight I felt in a scene that turns while accelerating.
The trouble caused by replacement is that it is hard for STAND to hang. I got used to it soon.. Oh yeah, Bearing is not Rubber seal, so I like car wash Large, even in rain running, if rainy storage keeps Bearing 's bruising earlier.
* Simultaneous exchange : The company's Handlebar
View detail
The racing footrest / rearset are great. No modification needed, all bolts and nuts are provided. The quality is also superb. Will definitely consider this brand in future should I change my bike and need more rearsets.
The racing footrest / rearset are great. No modification needed, all bolts and nuts are provided. The quality is also superb. Will definitely consider this brand in future should I change my bike and need more rearsets. View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
bonsai
It was compared with other Manufacturer's items at the same price range,
Because the return spring is contained in the thing of this person on the Brake side, it became the deciding factor of purchase.
With ABS compliance,
It seems that Position does not move much.
Maximum Large value 10 mmBack / I will install it with 15 mm Up.
Although there are things like Parts List regarding installation, it is not so difficult if you can understand it,
If you can not understand the structure Brake side MASTERetc. I do not recommend installing by myself as there is a transplant.
I think that installation will not take so much,
Adjustment has a higher degree of difficulty.
After installing and adjusting it and running,
Position has not changed so much,
It is normal but clearly understandable feeling as Snap.
Because of Rubber mount in NORMAL,
Although it was a sharp footpeg, after changing it,
It is easy to step in with a good feeling.
On the other hand, vibration may come to the sole of the foot so long distances may be numb.
Clearly, there is no dramatic change in this amount of movement,
It's a bonsai Parts (Lol)
But I like footpeg refreshing around.
View detail
Domestic peace of mind
Reliable domestic production Manufacturer I am also solid and easy to understand Instruction Manual. Even one person can do installation somehow. For safety and security it is easy to install with two people. Footpeg's Knurl processing feels a bit shallow. Depending on your shoes. Main Footpeg is not Foldable It may be inconvenient for Town use.
View detail
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50
Ape50 (Mukawa river 80cc Bore up) Attached to!
Ape50 (Mukawa river 80cc Bore up) - I installed it in 2007 year. I waited for the delivery date for one month on a delivery date and a little longer personally. It was a very satisfactory item! Although it is installation information, when you use Engine with SteelArm of Mukawa river, if you fold footpeg, there was no interference.
The price is a bit stretched, but I thought it was a very good product.
View detail
Not only Circuit but also Good look
We installed Rear Sets as the first step in planning Circuit of Grom.
The deciding factor is that it can be attached as NORMAL
You can change Position to some extent.
Moreover, Bearing is adopted as a movable part
Although it becomes one-seat ride, we are satisfied with Large because we can eliminate unnecessary things and make it look clearer and contribute to weight saving.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
Over 4 Position Rear Sets Kit
Operability - Functionally I did not have any problem with OEM footpeg, but I was deciding that this is the moment when I saw the atmosphere of Reduction in cost considerably and the moment I saw 4 Position Rear Sets Kit released from Mr. Over Originally I was considering buying at Black Anodized, but since I did not like seeing friends' Black Anodized going fading with other company's products, I made it to Silver.
As for looks, the scenery of the whole car body has considerable influence, the atmosphere changes at all! With respect to operability, this person is more sensitive to Shift change than Snap and from OEM footpeg!
Gold amount is a little stretched but it is worth it!
View detail