Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Over Sprocket Cover
I love it because it comes with Design and Change Accent.
I think it is less expensive than other Manufacturers
View detail
Engraved Shift does not match the 10-13 model
[How is it used? I replaced it in conjunction with the introduction of the company's Light clutch kit.
Was the installation difficult? All I had to do was remove and replace the OEM, but it took me about 3 hours (including cleanup) to clean the accumulated ChainGrease dirt and polish the parts exposed by removing the OEM resin cover, as well as to replace the light clutch kit.
How was your experience with it? It is the self-satisfaction of Dress-up.
[Included Parts:were they on? Gasket and other necessary parts are included.
[Was there anything that disappointed you? I'm considering filling it with Bolt.
[Notes] In the product description of this site, the car model is -13, but on the Manufacturer's website, the car model is for 14 years or later. This is because Shift up to 6-speed is stamped on the product (according to the answer we received from the manufacturer). We have a 2010 model (5-speed), so I would like to hide the 6-speed indication by masking, etc. when the car is inspected. The installation itself was Large sturdy even after -13 years.
View detail
Good news *optimized for little ones
I am short and have short legs.
Lowered with Lowdown Kit when purchasing GB350S
Seat uncoated and lowered to the limit.
The side cover was in the way and the footing was not good.
I wanted to keep the GB350S Logo, but when I asked the manufacturer about it, they said it was a little bit too small.
I bought it because I thought it might improve my footing.
The Side Cover Left Side can also be fitted with the original key.
The Left Side has a slight bulge of the Side cover on the inside due to its structure.
The Side cover of the Right Side is almost flat, which contributes to a large footing. Thanks to this, the right foot can step on the ground firmly.
When installing Right Side, it can be installed by lifting it up slightly without removing the tank.
Minus1 because there was a hole in the License Plate and it was unnecessary for me who wanted to Design.
View detail
???
In one place the Screw hole did not fit a little. Maybe it is an individual Motorcycle difference.
The holes were slightly widened with Drill and installed.
View detail
Over good.
Exhaust system and footpeg are also over so I would like to install them all together. The installation was easy to understand and satisfactory. View detail
A luxurious dish
Not good compared to NORMAL
1:Cannot contain documents or on-board tools due to final fixation with Bolt.
2:Careful when washing the car in the rain or when washing the car because of a gap at the top
3:Expensive as a single Side cover
Good points compared to NORMAL
1:Cool
2:Cool
3:Cool
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
It's a good feeling.
I am very satisfied with the appearance.
The installation was not too difficult and I was able to install it myself.
I appreciate that OVER's products come with a good Instruction Manual.
However, the cord is bare, so that's my only complaint.
View detail
A luxurious dish
Not good compared to NORMAL
1:Cannot contain documents or on-board tools due to final fixation with Bolt.
2:Careful when washing the car in the rain or when washing the car because of a gap at the top
3:Expensive as a single Side cover
Good points compared to NORMAL
1:Cool
2:Cool
3:Cool
View detail
Working alone is tedious …
Design is as shown in the product image.
If you don't like Over, or if you don't like the design, it's on the expensive side, so don't buy it;
Note that there is no cover for the hole to pull in the wiring. The Cover in the image was a cosmetic Cover under the Stop-lamp ….
In the instruction manual, you are supposed to hold down four bolts while you install it on the body, but if you're not careful, the bolts will fall off and the collar will gap. If you're not careful, the bolt will fall off = the collar will gap, and you'll have to redo the 4 collar sets. If you are not careful, the bolt will fall off and the collar will gap.
If you really want to do it alone, you can use the front two plus a collar to hold the tail under cover, and a long collar in the back without inserting the bolt, Quantity.:Set (The color will fit in the recess as it penetrates the Tail under cover) The front is temporarily fixed. I temporarily fixed the front, checked the back two collars for gaps, and installed the bolts. (In the end, I was able to do it this way, but each person is different, so please use the method you are comfortable with. It's just for reference.)
View detail
It's good
The design and quality are good and the dress-up effect is high.
It is important to note that the Seat fixed Knob from Other Brand Products cannot be used due to interference, and the Accessory Case in the OEM Cover will also be lost. The other thing is that the price is a little bit high …^^;
View detail
Be careful of the lock nut on the back.
When I thought about the pushing/pushing noise, I found that the lock nut that tightens with the fork guard was not closed properly.
But this lock nut is hard to tighten! If you want to work properly, you may want to remove the FTire! You may think that the screw of the Fork Guard is closed properly, but it is not.
Also, although it is not directly related to this product, the back of the fender of the Monkey 125 is surprisingly easy to rust. I used to check and polish the back of the fender periodically, but now that it is down, it will be difficult to see. [Color] I sprayed the back of the fender with Clear rust inhibitor and installed it. Also, the guide for the brake hose on the fender is going to be moved, so I need to do something about that.
The other User's way. I've attached Mukawa's parts. We also ordered the parts from the manufacturer and installed them.
View detail
Very good, but it would be better...
This hollow front sprocket cover has a higher appearance than the original factory, and the condition of the front sprocket can be directly observed. It is simple to install and can be perfectly replaced in place. After talking about the advantages, let’s talk about the deficiencies. Because you can see the oil pollution of the front chainring more clearly, you have to have one more area that needs to be carefully cleaned every time you wash the car, and because it is hollowed out, it feels more susceptible to contamination. In addition, it would be great if the modified hollow sprocket cover can be designed to cover the exposed pipeline in the front... ------------------------------------ This hollow front toothboard cover is higher than the original value, and can directly observe the status of the front tooth, and the installation is simple and can be perfectly replaced. It is said that it is prone to the premium, and it will be more clear, because you can see the oil sewage of the front toothboard, so every time the car is carried, there is a need to carefully clean, but because it is hollow, it feels more easily contaminated · ························ ············································ View detail
High quality and robust construction
It has a nice look and texture.
If you install it with temporary assembly at the time of installation
I can't get my hands on it, so I have to tighten it to assemble it.
The subtle adjustment did not go well, and a little wound was attached.
I'm done. I want three hands…
View detail
It's perfect.
The existing original over emblem perfectly fits my broken muffler. It seems to be a new one again. I've been heartbroken since I used a broken emblem. I'm happy now. View detail
MONKEY125 Over Fender Eliminator Kit Installation
I am very satisfied with the design and texture of this product.
I think it will prevent some of the bouncing up and down when driving in the rain.
I just think the price is a little high.
View detail
The quality is excellent.
I love the quality of the look and design of the solidly built and well-built product, the Shift pattern is stamped on the body and the security standards. [Color] Clear. The installation instruction manual is very helpful and easy to install. View detail
Over racing sprocket cover
Fast delivery very nice over racing product easily mounts on my kawasaki Gpz 900 ninja motorcycle thank you Webike hi see you soon Fast delivery very nice over racing product mounts easily on my motorcycle kawasaki Gpz 900 ninja thank you Webike hi see you soon translated by Google Translator View detail
over the top! It's expensive!
This is Parenthesis too good Especially the Down Type Exhaust System and the Right SideCover If you want one, you should buy this one
It's easy to install because you only have to remove the screw and attach it
But you can relocate the Battery to the Right SideCover, but there is no cover on top I'm against the relocation because it's better to keep the Battery as it is
It's also surprisingly heavy If you're a woman, it's better to work a little more slowly
Just too expensive!
Nearly 30 million list price is a very expensive part, even for exterior parts
If you're buying this, I'd suggest a Handlebar or Exhaust System replacement
View detail
It's made over! No complaints
Installed in 5Liter Carburetor VehiclesMONKEY The Right Side of the car has been scuttled by changing to the exhaust system of
When I was considering an outside cover or oil catch tank, I decided to use the OVER product Find the Cover of
I bought this cover made by OVER because of its shape and because it looked easy to install It is installed by Seat, Left SideOEMCover and
Remove the Front Side Rear Carrier Bolt from the Right Side and OEM Exhaust The system is made over using the Bolt holes that were fixed
It is very easy to fix the cover and the Left Side As with the OEMCover, you just need to frame it
The quality is also as good as it gets over the top, perfect for dress-up
There is also the difference between the individual difference of the car body, but the cover of the Left Side is Exactly attached There is a little bit of rattling It seems unlikely to come off while driving, so the problem is
I don't think so It's in the imprecise of others
On the Left Side, you can see the upper part of the battery part The shape doesn't help, but in the rain
I think you can use OEMCover
Good looks I'm glad I bought the Cover made by over for both installation accuracy and ease of use The price is high, but I am satisfied with it
View detail
Shift mistake prevention, Shift touch improvement effect Large?
Aluminum Cut-out Sprocket cover
Shift accuracy is improved because Seal bearing is adopted for Change shaft part.
Since OEMCover is not using Bearing, the hole of Change shaft deforms due to aged deterioration and Shift miss comes out.
I think Shift mistakes will decrease and it will also protect GEAR.
By the way, my vehicle was already prepared to withdraw from GEAR, but before the exchange I got Shift mistake.
In addition, OEM 2. Lighter and lighter as 4 kg ~ 800 g approx..
Same with Manufacturer, Light touchClutch
If you have Black Anodized or Color, are you grateful?
View detail