Reviews
DIY is not easy, but it's a great product
This product does not impair the aesthetics of the bike and enhances the rigidity of the vehicle body. Mounting is difficult on your own, I recommend going to the maintenance shop. The shimmering of chrome makes the bike very stand out. If you wear this, your bike gets a different look than others. View detail
Cost performance ◎
We chose the over-made model because we wanted to coordinate it with the sub-frames.
The installation was done by Shop.
Material:Polishing was selected, and the connection with the sub-frame is now shiningly gorgeous.
Custom feeling is up, I am satisfied.
View detail
Jack-up required
When you look down while straddling it, it has a cool Machine feel to it.
I am quite satisfied, but there is a caveat.
Although not mentioned in the Instruction Manual, the Engine must be supported by a Jack or the Bolt may not fit.
Specifically, when removing the OEM FrontEngineMounting Bolt and replacing it with the Engine Mount Collar Bolt, the Engine was lowered and the Bolt did not fit properly.
To prevent this, the Engine must be supported by Jack.
If it does not fit easily, fine-tune the position with Jack and never forcefully tighten Bolt.
You should really be careful because the worst that can happen is that the Engine side will be damaged and you will fly hundreds of thousands of dollars for repair and replacement.
Even if you ask Shop to install it, it is safer to ask a reliable place such as Plaza.
The Instruction Manual does not list the tightening Torque, so there is also a risk in that regard if you ask a contractor who does not refer to the Service Manual.
View detail
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
The silver subframe looks great.
I considered the black color, but I chose silver.
The side view is even better with the subframe shining.
The finish is excellent. There was almost no processing error and it seemed to be worth the price.
When installing, note that the bushings entering the frame are different on the left and right.
I thought about it before buying, but I have no regrets. -------------------------------------------------- -------- I considered the black color, but I chose it as a silver. The subframe is shining and the side is even better. The deadline is excellent. There was almost no processing error and it seemed to be worth it. Be careful to install the bushing that enters the frame when installing is different. I was worried before buying, but I do not regret it. Powered by Google Translator
View detail
OVER Racing ?
First of all, I wanted one just by looking at the photos of the presentation, so I placed an Order that day!
I waited over 2 months, but when I received it, opened it and picked it up, I was Large satisfied with the quality of the finish and rigidity.
When installed, it has a luxurious feel and surprises everyone who sees it.
I think it is over-quality for the CT125, but I am glad I purchased it just because I am more than 100% satisfied.
View detail
Standard modifications
Silver is cheaper but the color MATCH feeling is Black.
The person wearing it is Large body Polished aluminum.
Matching good with Engine Black.
Quantity:Pair (for Left and Right) Note that the color thickness of the "Color Thickness" is not the same in some areas, so be careful when installing the product.
The sub-frame per-frame surface will float.
View detail
fine parts
My motorcycle is a KAWASAKI Z900RS. The bumper I bought elsewhere was big and thick, not good-looking at all, and very heavy. I repurchased this OVER RACING side engine bumper on webike, this one is made of aluminum, strong and light. The shape is also handsome. Webikie shipped very quickly, the packaging is in good condition, and will repurchase. -------------------------------------------------- -------- My motorcycle is Kawasaki Z900RS. The barrier bought in other places was big and thick. It was not good at all, and it was very heavy. I re -purchased this Over Racing side engine bumper on Webike . This is made of aluminum, which is strong and lightweight. The shape is also handsome. Webikie is delivered quickly, the packaging is intact, and it will repurchase. Powered by Google Translator View detail
Amazing, worth every penny.
They came in fast, nicely packaged, and easy to install. They made the bike for more comfortable in a wheelie, definitely stiffened it up some. I love the texture and the really are amazing quality all around.About quality and texture View detail
OVER RACING
About quality and texture 7n01 material, first-class texture About the use experience Retro Look Frame Rigidity Improvement Products purchased together Separate handlebar Installation difficulty It is recommended to go to a repair shop to install Cost-effectiveness and comparison with other products Value for money, I love this brand product About shipping and packaging Packaging is tight Any concerns, cautions or advice when purchasing It is recommended to buy the rear flat fork together, the matching effect is better View detail
Over Racing Subframe Kit
Top quality product,very easy to install and looks brillant.Happy customer ! Also special thanks to the Webike Team for sending a spare fitting bolt with free shipping to Spain after I 'misplaced' one of the originals. View detail
OVER RACING Subframe Kit
This Over racing subframe kit has very nice quality, nice fit and finish. Very easy to install. Item was shipped fast and well packaged. I would recommend this part. View detail
Motor protection
Fairly easy assembly if you follow the documentation, the finish of the protections is superb, the fit is precise and the rendering is consistent. It takes less than 45 minutes to install, be careful, you need two 14 mm pipe wrenches and a large Allen key for tightening. -------------------------------------------------- -------- Quite easy assembly if we follow the documentation, the protection finish is superb, the adjustment precise and the rendering is consistent. It takes less than 45 minutes for installation, be careful need two key key of 14 and a large allen key for tightening. Powered by Google Translator View detail
Looks expensive but worth the money
Once you receive it, it doesn't feel expensive. The finish is very good. Easy to install and feels good after installation. If it's in stock, buy it quickly. If it's in stock, buy it even if you have to wait. You'll regret it if you don't buy this. Delivery is pretty fast. View detail
cool
Good quality and I like the design. It fits perfectly without processing. Good quality and I like the design. It fits perfectly without processing. It fits the motorcycle very well. The quality is good and I like the design. It fits without processing. It fits without processing. I like the design It fits perfectly without processing. It suits my motorcycle so well View detail
Focus on the look.
I was torn between Company A and Swing Arm.
Since I have Over on, I decided to use Over for Balance.
The installation was done after Jack was placed under the Engine.
Work. It is not so difficult, but it takes Small one hour.
I worked carefully again.
From what I've run, I can feel the increased stiffness, and it looks perfect!
View detail
It's got a lot of gravitas.
As a novice, I haven't experienced the effects of Sub-frame, so in my case, it's completely about appearance.
Black was expensive and I was hesitant, but the founding BigSale made it cheap!
I thought it was now or never and popped it immediately.
It's more massive and Large satisfied.
View detail
The best engine defense system!
I purchased an engine protector from overracing. As expected, the combination with the motorcycle is excellent. It has a good sense of unity as if it were originally on it. The material is hard enough so that the engine
Best for protection. If you install it together with the slider sold together, you can protect the bike even more. ------------------------------------------------------------ -------- Overracing's engine protector was purchased. As expected, combinations with motorcycles are great as they are excellent. The material is sufficiently hard to protect the engine
. If you install it with a slider that sells together, you can more powerful the bike.
View detail
It'll be heavy-handed.
I think the presence as dress-up parts is larger, but I am very satisfied with the increased volume of the motorcycle by installing it. I think it was the right decision to choose Black because it gives a sense of unity with the main frame. I was able to install it without any processing without interfering with the exhaust pipe made by BEET. This is a high quality Sub-frame that is both light and strong. View detail
Overlaying Subframe Guard
Classic look and sturdy protection!
It is a reliable product.
There are many other brands' products, but I decided to purchase them because of the robustness and elegant design of the overlaying. I highly recommend it. z900rs is an unconditional overlaying frame guard. ------------------------------------------------------------ -------- Classic appearance and durable protection!
Reliable products.
There are many other brand products, but have been purchased because of the robustness of overlaying only. We recommend strong. Z900RS is an unconditional overreaded frame guard. Powered by Google Translator
View detail