Reviews
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
It's a small thing.
I need it to change Caliper.
It's not very obvious, but I'm not sure if the Over text is a good idea.
Rear also wanted to Over.
View detail
About Pad Overhang
I was casually looking at the new product introduction from WEBIKE, and I saw that the UP Type of Rear caliper support for the new Crab is now on sale from OVER, so I bought it.
I knew that there were some manufacturers that sold a rear caliper support for Crab, but all of them were of the type that was installed on the underside.
As for the installation, we would like to describe our concerns about the Pad, as we have received information from others about the Pad sticking out in their impressions.
First, I installed the Support+NewCrab on the OEMdisc and looked at the contact surface of the Pad and felt about 1mm of contact on the outside.
Next, we removed only the Pad of the new Crab and placed it on the OEMdisc with the OEMPad perpendicular to the OEMdisc. The height of both the Pad of the new Crab and the OEMPad were the same.
As a result, the Pad protrudes 1mm from the periphery of the OVER-made Support, so it is necessary to shave this off.
When shaving the new CrabPad, it would be helpful to trace the outer circumference with Magic or similar to give a guide when shaving.
In our case, we attached a carbide rotary bar to a cheap wired electric drill from Home center and scraped it off, but a File or similar may also be used for a diagonal drop.
If you continue to use an OEM disc with only Caliper+Support replacement, it may be safer to drop a little more than 2mm, since the chamfer of the OEM disc is larger than that of the MADE IN SUNSTAR disc. Therefore, it may be safer to drop a little more than 2mm.
*There may be some errors due to individual differences, so matching the actual product is the best way to be sure.
As for the weight, OEMSupport weighs 391g including the bolt and OVER Support weighs 299g including the bolt, which is about 92g lighter than OEMSupport.
Both of the mounting Bolts are replaced with Titaniumium Bolt.
The total of Caliper support + new Crab + MADE IN SUNSTARRear Disc this time made it possible to reduce the weight by about 400g, but the cost was also quite high, so I thought it was not worth the effort to change.
However, the BlackCaliper felt cheap with SP's Swing Arm, so it is now cooler.
The lightweight under Spring is … I haven't been able to run it that much yet, but it's likely that I don't know much about it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
For Z900RS
To install brembo new Crab on Z900RS.
This was the only supersupport available until a short time ago.
The price is relatively high.
The air can not be vented as it is when it is subscripted, so it is necessary to use Fashion.
Downward is not dignified, and the Hose will be longer.
It can also face downward.
4 stars because it is expensive.
View detail
OVER RACING Disc Conversion Kit
About quality and texture be of good quality About the feeling of use I'm happy to be able to use the disk Products to buy together G-CRAFT Reserve Tank-Less Kit Type 3 Difficulty of installation I don't know what the manual is after seeing it as a picture. It took a little time to install it after taking it apart, but it wasn't difficult Cost performance and comparison with other products Disk-only backstab recommended About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing It's the product that came to mind the most in the process of converting disks Considering that there is no difference in price between disc-only and drum-only, I feel like I paid more during the disc conversion process If you're thinking about converting to a disk, I recommend using it exclusively View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
Built well but doesnt work with ABS
The Over Racing brembo adaptor is a beautifully designed part but will not work with ABS unless you shave your rotor bolts or modify the part itself. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Great product that looks amazing on the bike
The Over Racing brembo adaptor is a beautifully designed adaptor. I had no issues installing this part on my bike. The part is much lighter than the OEM version. The only downside is the part doesnt have a cable guide for the brake line. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE
The atmosphere is good. I will try the performance with Circuit.
I bought the non-glossy twill fabric. It is easy to install because you only have to put Bracket between Fork and Caliper and fix it with the attached Nut. The paintwork is cracked, so it's a bit of a mess. It's a bit of a problem. It would have been a 5 star if the part was made to have no interference. 。 View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
High quality as always
There is no Manufacturer's Warranty for the MT-03, but it can be installed (although (At your own risk)
OEM Caliper support is the same for MT-25, YRF-R25 and MT-03 I bought it because I figured it was a number so I could install it
First of all, I was impressed with the lightness and accuracy of the car upon arrival, and OVER Racing has a couple of products I use it and I think it's high quality
Caliper support itself can be installed without any modification, but it is possible to fix the brake hose and so on It takes a lot of ingenuity to install them
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
Not as pricey as the price, but the construction is beautiful and satisfying
It is for DAEG, but you can use it for 1200R and Caliper because the part number is the same
Cut-out is beautiful, it is made in detail, and the workmanship is good compared with Active products It is
The price is higher for that, but the included Torque Rod is also cut-out, so you'll have a sense of satisfaction It's expensive
Overall, it's a good product, but it's still a bit pricey, if you don't care about the Over I think it's more Wallet-friendly to be made by Active
View detail
It purchased, when exchanging a Caliper for the product made from a brembo. -- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are ta
It purchased, when exchanging a Caliper for the product made from a brembo.
-- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are taken to carry out Center appearance was heard, this product that can carry out Pons attachment was chosen.
It was easy wearing in
.
Since it is the
appearance * price *, it is pleasing.
View detail
* carrying out appearance good and attaching -- an easy * price -- * -- individually good shopping * -- is OVER -- the thing ♪
* carrying out appearance good and attaching -- an easy * price -- *
-- individually good shopping * --
is OVER -- the thing ♪
View detail