Reviews
Fits: HONDA GROM, HONDA GROM, HONDA GROM
Front caliper support by OVER
This is required when installing the SUNSTAR&OVER collaborative brake rotor and Brembo caliper.
Due to the thickness of the brake rotor, the floater hits the caliper support.
Caliper support that has been addressed is required.
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
OVER RACING Front Caliper Support for Brembo on Honda Monkey 125
About quality and texture - Top quality. Beatuifully machined adapting bracket and I love that it is availble in black to blend in with the OEM lower fork leg. About the feeling of use - Perfect fit at both ends and the upgraded caliper have no issues operating. Products to buy together - You will be needing the Brembo caliper to complete the install and wanting a braided brake line to make the install perfect. Difficulty of installation - I found the install of the bracket easy, straight forward replacement of the OEM brake caliper. Cost performance and comparison with other products - There are a number of brands with this product here on Webike and all priced vary similar, I went with Over Racing for the win. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - Some of these products available specify they are not compatible with the ABS Monkey, so be sure to select the correct one for your setup. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Light weight and well built
Because of the speed sensor, I was using Caliper support made by Takekawa, but I replaced it with a new SpeedController made by the same Takekawa, and the speed sensor bracket became unnecessary. I replaced it with a new one.
It's as if Over has managed to make it as light as possible, yet strong enough to hold up to the rigging.
The core of the disc is Exactly and the accuracy is perfect.
I chose black to match the color of the Front and Caliper, but I guess that's just my preference. I think I like it.
The price is well worth it, and I recommend that you use a reliable product like Konno's, as a defective brake can be fatal.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
OVER RACING Rear brake caliper seat for Brembo 2 piston
Material: Anodized silver aluminum alloy, the quality is better than what I am using! Function: The caliper can switch the top and bottom layout. Purchase installation experience: Prepare for the replacement of the swing arm, so please purchase replacement parts. The delivery time is very fast and the goods will arrive at around 7 o'clock soon. I am very satisfied! View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
Built well but doesnt work with ABS
The Over Racing brembo adaptor is a beautifully designed part but will not work with ABS unless you shave your rotor bolts or modify the part itself. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Great product that looks amazing on the bike
The Over Racing brembo adaptor is a beautifully designed adaptor. I had no issues installing this part on my bike. The part is much lighter than the OEM version. The only downside is the part doesnt have a cable guide for the brake line. View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
No problem with ABS.
I bought this for the conversion to Brembo caliper.
In the first place, there are almost no options for products that claim to be compatible with ABS due to interference problems.
The impressions of the installation are as expected of Over, the accuracy is spot on and there are almost no problems.
I think this is because of the interference with the mounting bolt of the brake disc, but I think the pad is sticking out a little from the outer circumference of the disc, so I need to check after the distance, and in some cases, I may need to shave the pad a little.
If you can tolerate this point, it is a very good product with high accuracy.
View detail
Installation Control for GSX-S1000 late stage for KATANA1000
It is the Parts which can take the benefit of KATANA1000 happily.
This is the first time I have bought OVER support and it is very beautiful with Cut-out and Anodized.
With Bolt On, you can easily replace the rear caliper with the new Crab type Brembo.
For GSX-S1000, other companies sell support to change the rear caliper to brembo, but all of them require brake hose replacement.
Moreover, it is only designed with the old Crab caliper.
For installation, the method of routing the brake hose and ABSSensor cable has been changed, and the aluminum bracket has been replaced by the Quantity:There are 2pc and
Attach the Bracket to the inside of the Swing Arm with double-sided tape, then attach the Brake hose and ABSSensor to the Bracket with the Tie Wrap.
Caliper boltQuantity:It also came with 2pc, but since it was an unadorned Bolt, I changed it to my Chromoly Bolt.
The only other parts you need to install are the Banjo bolt for Brembo and the Fluid for air bleeding.
As a hang of the installation, it is important that the fluid of the AXIS cheater does not fall out.
If you install the rear caliper above the fluid tank, the fluid will not come out, so you can shorten the air venting time to a large size.
For the Caliper, I chose the brembo new Crab34 (20.B852.73).
I thought about installing a CNCCaliper, but the Banjo bolt is in a different location than the new Crab.
Be aware that if you try to use the Brake hose without changing it, the only option is the new Crab.
By changing from the OEM rear caliper to this KIT, we have improved not only the appearance but also the serviceability.
It also reduces weight and improves the control of the rear.
There is no loss of stroke with the rear brembo, but on the contrary, the stroke width has been widened and it has become very easy to control.
The Support is very stiff and the Caliper does not twist when breaking.
With the way it feels, I don't think Gail's Rear master is necessary.
However, the ABSSensor Wiring is difficult to handle, and there is a possibility that it will contact the Rotor and break the wire, so I used Tie Wrap Fixing to take care of it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE
The atmosphere is good. I will try the performance with Circuit.
I bought the non-glossy twill fabric. It is easy to install because you only have to put Bracket between Fork and Caliper and fix it with the attached Nut. The paintwork is cracked, so it's a bit of a mess. It's a bit of a problem. It would have been a 5 star if the part was made to have no interference. 。 View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
High quality as always
There is no Manufacturer's Warranty for the MT-03, but it can be installed (although (At your own risk)
OEM Caliper support is the same for MT-25, YRF-R25 and MT-03 I bought it because I figured it was a number so I could install it
First of all, I was impressed with the lightness and accuracy of the car upon arrival, and OVER Racing has a couple of products I use it and I think it's high quality
Caliper support itself can be installed without any modification, but it is possible to fix the brake hose and so on It takes a lot of ingenuity to install them
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
Not as pricey as the price, but the construction is beautiful and satisfying
It is for DAEG, but you can use it for 1200R and Caliper because the part number is the same
Cut-out is beautiful, it is made in detail, and the workmanship is good compared with Active products It is
The price is higher for that, but the included Torque Rod is also cut-out, so you'll have a sense of satisfaction It's expensive
Overall, it's a good product, but it's still a bit pricey, if you don't care about the Over I think it's more Wallet-friendly to be made by Active
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item in mounting bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Just like me, "Brembobrembo : RearBrake Caliper P2 34 84mm "When trying to install this product in combination, there is a part that Brake Pads does not contact with disc. (It is Pad pin side)
It's written in Over Racing's Instruction Manual neatly but it is worth noting because it is better to shave off parts that do not touch disc.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I am satisfied with the quality very well, but the price is 3 times as much as the Front, so I was a little puzzled.
In fact, if you look at the hand, it is possible to do it unfortunately, but I feel that it is still a bit expensive.
【Have you compared items?】
AGRAS
[Others]
nothing special.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item when wearing bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Although there are personal impressions, if you select Black in color shade, Bolt is Silver, so it will feel a little floating.
Also, since it is a part that supports Caliper, which is an important security part, the Screw stop will inevitably become a relatively high Torque.
Because it is an Anodized processing, scratching will go, so if you do not like it, I think that it should be protected with SiliconWasher etc..
【Hope for Manufacturer - Please let me know if you have any improvement points]
As mentioned above, I think Black product should be attached with Black Bolt.
Bolt is stopped at 4 places so Silver color Bolt asserts too much and it's coolness
I felt like I had killed him..
【Have you compared items?】
AGRAS
Active
[Others]
nothing special.
View detail
It is a non-conforming choice...
It is not for use with compatible models NSFFork, brembo New Crab, but I used it for NSR 80 Fork at Beringer 2 POT.
It seems like a thin Gray-like color of Hard anodized aluminum feels calm.
It can be used with no problems with 220 mm Rotor.
For diversion MONKEYetc. If it is used for, there is a possibility that the center of Caliper may be needed by Washer, Color etc. depending on the hub to be used.
When diverted, use outside the conformity etc etc etc. There may also be combinations that can not be used in, so be careful.
View detail
[Webike Monitor] Since he wanted to also make the Rear caliper into a brembo, the Support here was purchased. The merit of structure saw and considered goods. The Logo of OVER also suits a brembo dramatically smartly by the Polished. at
[Webike Monitor] Since he wanted to also make the
Rear caliper into a brembo, the Support here was purchased.
The merit of structure saw and considered
goods.
The Logo of OVER also suits a brembo dramatically smartly by the
Polished.
attachment -- satisfactory -- Center appearance -- also carrying out -- it is not needed.
The attachment Bolt of a Brembo caliper is also attached.
♪ satisfied very much
View detail
It changed, when exchanging the Webike Monitor Swing arm and a Wheel. rigidity and brightness do not accumulate. Mr. OVER, the highest.
It changed, when exchanging the Webike Monitor
Swing arm and a Wheel.
rigidity and brightness do not accumulate.
Mr.
OVER, the highest.
View detail
It purchased, when exchanging a Caliper for the product made from a brembo. -- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are ta
It purchased, when exchanging a Caliper for the product made from a brembo.
-- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are taken to carry out Center appearance was heard, this product that can carry out Pons attachment was chosen.
It was easy wearing in
.
Since it is the
appearance * price *, it is pleasing.
View detail
* carrying out appearance good and attaching -- an easy * price -- * -- individually good shopping * -- is OVER -- the thing ♪
* carrying out appearance good and attaching -- an easy * price -- *
-- individually good shopping * --
is OVER -- the thing ♪
View detail
When exchanging a Caliper, it purchased together. It is a Polished if a feeling of appearance * rigid feeling * brightness * Caliper support is also made the product made from OVER!!
When exchanging a Caliper, it purchased together.
It is a Polished if a feeling of
appearance * rigid feeling * brightness *
Caliper support is also made the product made from OVER!!
View detail