Reviews
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
I think it was a good choice because it does not Tandem!
When aligned with the Bracket mounting position
The base part does not reach all the way to the back.
There were no exhaust leaks, so that's a good thing. w
I used OEM Screws for installation.
It's been a long time and I'd like to do something about it in the future. (^_^;)
I added a Swing Arm Cover & Mud Guard.
It makes it look better and kills two birds with one stone. w
It's also easier to clean & sweep up.
Three birds with one stone, is that too greedy?
View detail
Good quality at an affordable price.
It is a low-priced but high quality product and comes with Bolt and other accessories, making it a highly satisfactory product. View detail
Sleek, Sharp & Cool Bracket
I was thinking of getting silver bracket initially, but changed my mind to black since i purchased a black racing hook. I am so happy i made the choice to change color. The black is really cool; its not shining & matte. really make my bike look more classy and sharp. the over racing logo is carved, meaning it will not fade! i used it with akrapovic exhaust & exhaust protector. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Tandem FootpegBracket
With the change of the spec., we have the same manufacturer's OVER tandem stay as the Rear Sets!
Replacing the body is easy:just remove the bolt and replace it, and since the tandem footpeg is an OEM replacement, you can simply reattach it as if it was already installed. The angle of the footpeg can be adjusted, but since it is mostly for one rider, I didn't worry too much and tightened it up.
View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Race ish feeling Up!
Exhaust system is Trickster's Slip-on Silencer, but the bracket was originally installed at the NORMAL position, so it fits perfectly. View detail
Tandem Footpeg removed and replaced
It was replaced together with Exhaust System replacement.
I am satisfied with the lighter weight than OEM Product.
View detail
To convert to Single Seat
Tandem footpeg is removed and installed for single seat conversion.
Black for a clean look around the Rear
View detail
It may be a little incompatible with YOSHIMURA's Exhaust System.
I purchased an Exhaust Bracket for my cbr250rr YOSHIMURAR11 CYCLONE. I bought an exhaust bracket for my cbr250rr yoshimurar11 cyclone. If the bracket that connects the Slip-on Silencer to the Exhaust Bracket can be slightly shaved, the quantity:2pc. I am very happy to have the Screw in one hole as it is not the Exhaust Bracket from YOSHIMURA. I have been using it for about a month now and so far it works fine. The design of the product is cool and very stylish on the tail side, and I think it has a great dress-up effect! The price is a little bit high, but it's a … View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Wow that's cool
It's cool!
Recommendation!
By all means.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Suitable for Circuit driving
I use YOSHIMURA's R11, but since YOSHIMURA's Exhaust Bracket has been discontinued, I bought and used Over's one.
Since it says in the product details that the OEM Exhaust System is also compatible, I thought it could be used on the YOSHIMURAR11, which is fixed in the same position as the OEM, and the result was that it was successfully attached.
Since I use the Exhaust System for circuit driving, the collar connecting the Exhaust System to the Exhaust Bracket is a bit of an obstacle for hang-offs. Therefore, unlike the Instruction Manual, I put the collar on the inside of the exhaust bracket, although it is a bit unreasonable.
View detail
Fits a CB500F Perfectly!
Very nicely made and anodising is uniform. Handsom on the bike and cleans up the rear foot peg superbly. Nice little bit of weight savings too! View detail
Practical choice for texture!
After I modified the exhaust pipe, because of the angle of the modified exhaust pipe, the rear pedal bracket had to be changed and raised. But in this way, the ride comfort of the back seat becomes worse. The rear pedal bracket of this OVER RACING has the same screw holes as the original bracket, but the pedal position has to be expanded. Therefore, it is possible to slightly improve the ride comfort of the rear seat while keeping the high exhaust angle unchanged. Very good! But it should be noted that in order to install this set of brackets, the bracket adapter code equipped with my R'S gear exhaust pipe needs to be polished partly! -------------------------------------------------- -------- After I changed the exhaust pipe, because the reasons for the angle of the exhaust pipe, the post-pedal bracket had to change the angle to do raise treatment. But in this way, the ride comfort of the rear seat became poor. The back pedal bracket of this Over Racing is the same as the screws of the original bracket, but the foot is more expanded. Therefore, it can be slightly improving the ride comfort of the rear seat while maintaining the high angle of exhaust gas. However, it should be noted that in order to install this set of brackets, my R's GEAR exhaust pipe is equipped with the bracket transfer code needs to be partized! View detail
z900rs&over racing
z900rs has changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all high-quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button, and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts at webike. I hope that webike will continue to work hard and offer more discounts! come on! z900rs changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all of high quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts on webike. I hope that webike will continue to work hard and offer more discounts! Come on! translated by Google Translator View detail
as pictured
The exhaust system area was cleaned up and the design is good enough to satisfy me. I would like to use it again as the shipping was fast after ordering. View detail
Refreshing around the back
I thought Tandem Footpeg was putting out the volume in the back, and I thought that SeatBack and If you are wearing Seat Cowl, I think it's worth buying it The ride is hard on the back end
I installed it on the Full Exhaust System made by SCORPION It is possible to install without any problem I can install it even if I don't want to, which is very helpful
View detail
good quality
Tandem Footpeg, since the CBR250RR's Tandem seat was made into a cowl I bought it because I was going to take it off too and make it Refreshing The strength seems to be fine I didn't notice it, but there is one dent in the surface horizontally If you look closely at the photo of the product, you can see a dent there as well, so I'm assuming it's from the manufacturing process It is View detail
Design is Parenthesis nice!
I use it in combination with TSR's Slip-on Silencer.
By saying that OVER's Bracket is compatible with Normal muffler,
Exhaust System side also supports Normal stepBracket so Bolt hole position etc etc. I thought that there was no problem but I purchased it, but it was in a condition that I needed some impossibility.
By pinching Bracket and Spacer,
I think that it is for people who can respond flexibly.
I think that it is better not to purchase with Pon attachment Image.
Fine adjustment of the angle of the exhaust system side, fine adjustment of the bracket side also in the moving range, etc. It is a feeling that the position of the hole gently agrees.
As the Exhaust Band of the TSR is fixed, a Type Exhaust System where the Exhaust Band position can be adjusted back and forth may be good.
In fact, OVER's Exhaust System also uses such Band.
Although the bending muscle at the time of manufacturing and processing by the distributor is contained, it does not matter if it is attached.
Also, it can not be helped Spec..
View detail
Accuracy, texture is wonderful
I bought it for thing that it is necessary for installation of TT-FORMULAExhaust System on 17 year Grom.. Like the Exhaust System, accuracy and texture are satisfactory.
Just install mounting instead of Bracket that was packed in Exhaust System.
It was easy to install because the accuracy was good.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
Over Racing Billet Exhaust hanger
This review is for the over racing billet exhaust hanger or bracket. I was pleasantly surprised when I received this item. It looked great and had additional hardware to match the silver finish. I installed it on my 2016 Yamaha R3 with two brothers racing exhaust and it fit perfectly. Another advantage to the hanger is that it’s much lighter than the stock exhaust hanger/ rear foot peg. I’d have no problem recommending this item to a friend. View detail