Reviews
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Good pad
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
In my opinion, it's Psycho!
It was not for YAMAHA's XSR155. (For SEA BASS GSX) I was looking for a new product, but the red letter "R" had a good parenthesis, so I bought it and put it on the wall. I bought it and put it on the wall because it was red and the letter "R" had a good parenthesis. I'm glad I bought it! View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Fits: YAMAHA FJ1100, YAMAHA FJ1200, YAMAHA XJR1200, YAMAHA XJR1300
Clutch lighter.
[How is it used?
Introduced on MainMotorcycle's XJR1300C.
This time, OEMRelease has been peeing Release, which is a chronic disease of XJR1300,
I was preparing a new OEM Release, and when I saw the new OBERON Release, I immediately purchased it.
Was the one you received as per Image?
The release itself is lightweight with a CNCBody and Aluminum Piston.
I really wanted to go for KFACTORY's Release, but the new ones are out of stock... and I don't want to buy used ones...
At that time, I saw a limited reissue on Yahoo Shopping, but the price was too high, about 40,000 yen, and I lost interest in buying it,
Release in such a situation, about 2,500 yen, is well built and highly satisfactory.
Was the installation difficult?
If you can bleed air, there is nothing difficult about it.
I have a COERCE drive sprocket guard installed, and I was able to install it with no problems and no interference.
Incidentally, it appears that KFACTORY's Release cannot be used with COERCE's Drive sprocket cover.
How was your experience with it?
The MASTER is using brembo's 19RCS.
When I first received the product, I found that the Release Piston was much smaller than the OEM one,
I'll have to change the size of MASTER... I've been duped! I thought.
I can definitely recommend the MASTER, as it is still the same and lighter!
By the way, Piston size is,
OEM:approx. 38mm
OBERON:approx. 25mm
(K-fac:40mm)
Yes, it is a theory that the release side piston diameter should be larger and lighter than the K-fac side, but this is not the case,
OBERON has a smaller piston diameter, but somehow it is lighter.
I did not check it until I pulled out the Piston, so I do not know if there is a secret in the internal structure.
[Included Parts:were they on?
It comes with three bolts for mounting and three crash washers. And Instruction Manual.
Crash washer was a Type I had never seen before, so I was afraid to use it (laughs).
I used Active's leftover Crash washer.
[Was there anything that disappointed you?
Not at all, it's just a shame that PistonSmall is so small that it made me uneasy at first. (LOL)
If you replace it with this, it will be lighter (not that drastically lighter, but understandable Level),
I recommend it to XJR riders because it frees them from the OEMRelease chronic disease of peeing.
View detail
It is easy to install.
Hexagonal 4mm for the original
The product in question is a hexagonal 3mm.
Tools are not included.
The only work to be done is the removal and installation of Screws.
Screen hole position was also good
View detail
Installation is easy.
Hexagonal 4mm for the original
The product in question is a hexagonal 3mm.
Tools are not included.
The only work to be done is the removal and installation of Screws.
Screen hole position was also good
View detail
Tuning fork for Yamaha cars
I bought a tuning fork Mark for my Yamaha. This time, I degreased and centered the car well. The recommended environment is 15℃ or higher, so I used a dryer to warm up the car while I worked. View detail
satisfaction of long wait
About quality and texture
It took a long time to receive it after ordering, but after receiving it, it was worth the wait.
About the feeling of use
After installation, the bike was dressed up and it was pretty.
Products to buy together
Difficulty of installation
Installation is very easy and anyone can do it.
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing -------------------------- ----------------- About Quality and Texture It took a long time after ordering. About the Feeling of Use After mounting it, it was a bike dress up and it is pretty Products to Buy Together Difficulty of Installation Early difficulty is very easy and everyone is possible. Cost Performance and Comparison with Other Products About Shipping and Packaging Any Concerns, Cautions, or Advice when purchasing Powered by Google Translator
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Odax meter
Nice to have more kmh..unlocked the speed cut..but the instructions on japan..it could be easy in english..a very good product..thanksAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together: Difficulty of installation: use of youtubers search for odax el meter for kawadaeg Cost performance and comparison with other products: only this found on the web About shipping and packaging: nice packaging very secure.. Any concerns, cautions, or advice when purchasing: trusted seller View detail
T-Racer9gt
The design is great. It changes the atmosphere and looks awesome. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA
ODAX Daylight Kit
It is ideal for Touring. It is easy to see from quite a distance. The installation was a bit odd for Large, since I also installed the ON-OFFSwitch and Relay, so it was a bit odd for an amateur. View detail
ODAXBack fog
I like the way it looks! View detail
Effective
Purchased to keep dirt out of Engine and Titaniumium exhaust pipe.
This product is for JC92, but it could be installed on JC75 as well. I didn't want to drill holes in the Fender, so I used Ultra Strong Double-Sided Tape.
It also prevents the exhaust pipe from burning unevenly.
View detail
customization
If I put Guard on it, it will not work without machining. View detail
Fits: HONDA CB1300SF, HONDA CB400F, HONDA VFR800X, HONDA CB400SB, HONDA CB400SF, HONDA CBR600RR, HONDA CBR900RR, HONDA VFR1200F, HONDA VFR1200X, HONDA VFR800F, HONDA CB1300SB, HONDA CBR400R, HONDA CBR600F, HONDA CB400X, HONDA CB750, HONDA CB1000SF, HONDA CBR1000RR, HONDA HORNET900, HONDA CBR500R, HONDA VTR1000F
Good!
At Motorcycle shopetc., Material:I bought it because they only carry Carbon Style and I had never seen such a pattern and color before.
When I peeled off the Seat, it immediately became sticky, so I had to reapply it if I did not match the location well, and if I touched the sticky part too much, the stickiness would weaken, so I carefully matched the adhesive and attached the Seat.
I chose this red Seat because my Motorcycle is RedMain, but the tank lid is silver, so I put this Seat on it.:Carbon Style is fine, but with Color is also quite good.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI ZX-4RR, KAWASAKI ZX-25R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI ZX-4R, KAWASAKI ZX-6R, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS1000
POWER BRONZE Headlight Lens Shield
The Headlight Lens Shield was perfect. Secure packaging, no scratches, got it in excellent condition. Fitment around the headlight is perfect, it wont shake or rattle. I ordered the light smoke shield. It will definitely protect my headlight, and gives the bike a unique aggressive look. Makes the bike look mean and ripped. The lens shield is held by 3M velcro stickers, very secure and sturdy, won't fall off even at hightspeeds or bumpy rides. Will give this product 100%. 5 Stars!!! View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Easy installation OK
Size and installation is easy. I am satisfied with the way it looks. View detail
just right
I thought the Long would be long, but as other posters have said, it is just right. remove the Screw on the Body and replace it with the Bolt that comes with it. You have to put the Spacer between the existing Meter cover and the Bolt, but it is better not to work near the gutter or something, because the Spacer will fall off. Also, the bolt can be tightened as much as you want due to the cushioning of the spacer, so I stopped the bolt with the bolt head sticking out about 1.5mm. I haven't driven at high speed yet, but there is no problem in town driving. View detail