Reviews
Fits: HONDA CB1300SF, HONDA CB400F, HONDA VFR800X, HONDA CB400SB, HONDA CB400SF, HONDA CBR600RR, HONDA CBR900RR, HONDA VFR1200F, HONDA VFR1200X, HONDA VFR800F, HONDA CB1300SB, HONDA CBR400R, HONDA CBR600F, HONDA CB400X, HONDA CB750, HONDA CB1000SF, HONDA CBR1000RR, HONDA HORNET900, HONDA CBR500R, HONDA VTR1000F
Good!
At Motorcycle shopetc., Material:I bought it because they only carry Carbon Style and I had never seen such a pattern and color before.
When I peeled off the Seat, it immediately became sticky, so I had to reapply it if I did not match the location well, and if I touched the sticky part too much, the stickiness would weaken, so I carefully matched the adhesive and attached the Seat.
I chose this red Seat because my Motorcycle is RedMain, but the tank lid is silver, so I put this Seat on it.:Carbon Style is fine, but with Color is also quite good.
View detail
Not bright.
Blinker on moped is now LED.
The brightness was dimmer than the bulbs and did not make sense.
However, the power consumption became smaller, so I think it was effective there.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI ZX-4RR, KAWASAKI ZX-25R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI ZX-4R, KAWASAKI ZX-6R, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS1000
POWER BRONZE Headlight Lens Shield
The Headlight Lens Shield was perfect. Secure packaging, no scratches, got it in excellent condition. Fitment around the headlight is perfect, it wont shake or rattle. I ordered the light smoke shield. It will definitely protect my headlight, and gives the bike a unique aggressive look. Makes the bike look mean and ripped. The lens shield is held by 3M velcro stickers, very secure and sturdy, won't fall off even at hightspeeds or bumpy rides. Will give this product 100%. 5 Stars!!! View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Easy installation OK
Size and installation is easy. I am satisfied with the way it looks. View detail
![POWER BRONZE Naked Windshield [Long]](https://img.webike-cdn.net/catalogue/images/76441/430-U284B-002_1_TS.jpg)
just right
I thought the Long would be long, but as other posters have said, it is just right. remove the Screw on the Body and replace it with the Bolt that comes with it. You have to put the Spacer between the existing Meter cover and the Bolt, but it is better not to work near the gutter or something, because the Spacer will fall off. Also, the bolt can be tightened as much as you want due to the cushioning of the spacer, so I stopped the bolt with the bolt head sticking out about 1.5mm. I haven't driven at high speed yet, but there is no problem in town driving. View detail
Smoke screen up
Screen [Color] It looks tighter after Smoke. It is just my personal feeling. View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR
Hmm
I had not planned to replace my screens with anything other than an OEMScreen because I thought it would ruin the look of the screen, but since the OEMScreen is not windproof at all and I use a CB as a tourer, I got tired of it and bought this screen. First of all, my requirements for the screen were that it should not look too large and that it should have a shape that would provide windproof performance. I had no idea what it would look like because I didn't see any pictures of it from the front in other reviews. To be honest, I was worried because BOLDOR looks very tacky like a raven hat with an external Screen. I have a picture of it on my phone, but I think it looks cool in person, although the BOLDOR screen looks a little tacky due to its poor photo quality. There was a review that said the color was too light, but I think the OEM screen's color was originally too dark, so I'm not sure why. [Color] I thought Smoke was too dark and tacky, so this color is just right for me. The windproof effect is that the wind that used to hit me up to my chest now hits me above my shoulders, so I can probably ride comfortably even at 100 km or more on the highway. When I installed it, I thought it was not so good, because the screen itself is thin and there is a gap between the cowl and the screen in case of CB400SB. To tell the truth, it is not so nice, but I could not see it unless I look at it very close and it has a good windproof effect, so I decided to put up with it. Also, the seal called "ODAX" on the left side of the screen is tacky and I wish they didn't put it there. (We plan to remove it later.) The middle of the space is raised when viewed from the inside. The middle of the space is raised when viewed from the inside, so it looks like Dustcloth could be placed in that space. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
For a little dress-up
Just stick it on, so beginners don't have to worry. View detail
Fits: HONDA CBR650R, HONDA CBR400R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB250R, HONDA CB1300SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CRF1000F Africa Twin, HONDA VFR800X, HONDA VFR800F, HONDA CRF250 R, HONDA GROM-II
For gasoline cap protection
Purchased to protect gasoline cap and for dress-up.
The installation is completed simply by peeling it off the backing paper and sticking it on.
It will be clean and tight, and it is a good idea to put it on before hurting it.
View detail
Style is perfect!
Exhaust System is hidden and Refreshing and Parenthesis is nice. View detail
![[Powerbronze] Sports Air Flow Windshield](https://img.webike-cdn.net/catalogue/images/109930/400-S141-001a_TS.jpg)
The mounting holes are small.
[How is it used?
Touring。
Was the one you received as per Image?
It looks good
Was the installation difficult?
The mounting holes needed to be machined.
How was your experience with it?
So-so
View detail
Screen Effect
Naturally, it is not as effective as a Full Cowl, but wind pressure in the chest-shoulder area is considerably reduced. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000GT, SUZUKI KATANA
Effect in rainy weather Subtle
After replacing the rear suspension, I was concerned about dirt on the Normal inner fender, so I purchased this for the purpose of preventing dirt. It is a little better than Normal, but it looks cooler. View detail
good-looking
The light is dimmed, so I have to remove the Tunnel for night driving The Magic tape that came with the kit is too small, so I put a Magic tape from a hardware store. I put the Black Magic tape on the Normal screen and put it there when I run at night. View detail
The installation is,,
I bought it for cb1300sb, but cb400sb (nc42 early period) It was attached without any problem to the View detail
![POWER BRONZE Naked Windshield [Long]](https://img.webike-cdn.net/catalogue/images/77164/430-U289A-000_1_TS.jpg)
Mounting is unstable and insecure at high speeds
I installed it with the included Parts as soon as it arrived. The installation was completed in Small one hour without anxiety. I drove on the highway to try it out, but it started to shake and hit the phone attached to the Handlebar at over 80km/h. I had to slow down, and when I went into the SA to check, I found that the Material attached to the Screen had been removed.:The rubber grommet was cutting into the stay at an angle and was about to come off. The bolt is held in place by a stainless steel sleeve inside the grommet, so it is not loose, but the stay is a narrow tube, so no matter how much I tightened it, I thought it would not work.
So I took a hint from the OEM Speed screen and made a Stay with 3DPrinter and installed it (the gray part in the image). I think it will need to be adjusted a few times after driving, but it is installed more securely than the original product. I will give my impressions again after driving.
View detail
Fits: YAMAHA TZR250, YAMAHA FZS600, YAMAHA YZF1000R, YAMAHA YZF-R1, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA TRX850, YAMAHA TZR125, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA FJ1200, YAMAHA FZR250R
It doesn't fit
Did not fit XJR1300 RP17J.
be disappointed
View detail
It makes a different impression.
The instruction manual is very thorough. I am a little worried about the wiring. I'm worried about the durability of the UV light. View detail
Fits: HONDA VFR1200F, HONDA VFR1200X, HONDA VFR800F, HONDA VFR800X, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA HORNET600, HONDA CBR954RR, HONDA CB500F
I had trouble with Fuel cap padCarbon.
Not bad, but more color variations would be nice.
After putting it on, I think Carbon might be more comfortable for me.
View detail
![[Powerbronze]NAKED/Screen[Long]](https://img.webike-cdn.net/catalogue/images/115087/430-U338-002a_TS.jpg)
Depending on the speed range, the rating...
The OEM Meter visor was somewhat more effective than it looked, but this product is very windproof and can increase cruising speed by +20 kmh, which is excellent.
But there is a problem. That is the interference and deformation of Screen's Meter due to wind pressure.
The stopping point of the Bracket isQuantity:Pair (for Left and Right) 1 item each (Co-tightened with Headlight's Stopper Bolt) The bracket is low relative to the screen, so the wind pressure will completely hit the Meter depending on the speed of the wind. Since the supplied rubber is not enough, we attached a 2mm rubber plate. Then, we can see that the Right Side, which does not have the Meter, is deformed by the wind pressure while driving.
I feel that the upper part of the screen needs to be reinforced with a universal bracket or something, but the screen width is narrow, so I would like to carefully determine if a universal bracket can be used.
View detail