Reviews
Now you're safe.
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good.
Recently I became really curious about it and found this in search of S25 Valve, the official standard.
Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.
View detail
Very good. There's nothing wrong with it.
I bought this to convert my SL90 to 12V.
Quality, light output, color, price all good!
I think I will buy LED bulbs from this manufacturer from next time.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
It's bright and snappy.
[How is it used?
One week after installation.
Was the one you received as per Image?
Just like the picture of the product.
Was the installation difficult?
I think it's easy if you have experience removing and installing Cowl.
How was your experience with it?
Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit.
The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on?
sufficient
[Was there anything that disappointed you?
Two points for me.
When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.
View detail
It's neither good nor bad
I exchanged with the Rear blinker ball of NINJA 400 2017.
Valve The LED with a high height interfered with OEMLens, so we chose this item with a low height.
It does not interfere with Lens and its price is also inexpensive compared to other companies, but the light intensity is enough though OEMLens is Clear.
Kawasaki may be part of it, but Valve's Lock pin becomes angle Type.
Please be aware that you can not install if you purchase equilibrium Pin by mistake.
View detail
Slightly high
It is easy to install because it only replaces Valve very brightly, but it is better to increase the price slightly, preferably ICRelay at the same time if possible, however, because the PC 40 reverse car has Motor for exhaust Valve and there is almost no space It is difficult to let the 3-wire Type Resell etc. Conversion Adapter for 4 wires etc. View detail
Amount of light attached to the GSR 250 ○ Brightness at normal time and braking ○
When I pulled the Brake lever with IgnitionOn, the brake light glows and at the same time Flicker was interested in the LED of the Front's LED. Although it is the one electric bulb, although I looked for LED Lamp at the Motorcycle shop because of the high power, many that will cost 4000 or more Many LED Lamp 1 pc. I thought that 4000 yen is unnecessary, and when I search by webike it was ODAX's LED Lamp that I did Hit.
I do not hear Manufacturer and the real thing (Exhibition) I was worried because I could not see it, but the quality of the product, the brightness after installation has no problem, the price was also cheap so it is a satisfying product.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
Stealth
It will be Prismatic StealthBlinker.
There is no problem with the amount of light at the time of light emission, and I like the color tone very much.
After that, how durable is it?.
If the price is a bit cheaper ...
is not it.
View detail
It is the 2004 CB 1300 SF in 2004.
Although I have a Position feature at my pace, I guess because it is a Smoked lens, it was dark and not noticeable at all during the day. Since Rear has already been LEDized, this time I purchased Valve of two color emission with Single Item.
Although I made it to Blue & Orange conspicuously like during the day, I feel a bit Mischief ... Smoked lens Motorcycle It is a moving image lighting the projector from the front but I think it is pretty bright as it is flashing well. Relay is Posh's Wide watt blinker relay, but there is no problem with regard to operation.
When choosing Blue & Orange, I examined Motorcycle's Position lampBlinker, but eventually it was a Gray feeling. So installed it without worrying.
If the OEM is a bulb with Orange Lens, it costs a considerable amount in total, but I think that it is a recommended item to make use of the Position lamp function.
View detail
To the one-ball Blinker indicator which is often found in old cars - - -
It is a solid product.
However, although it is not limited to this product, the one-ball Blinker indicatorSpec. In Motorcycle, Blinker is in a Hazard state etc.. It seems that there are many things that become. In that case remove Indicator spheres or BlinkerPilotfor Both Left and Right car Harness LHN 700 etc. Let's use.
http : / / www. m-and-h-bulb. co. jp / lbeam / harness. html
View detail
It is bright.
Valand of BANDIT - Clear cover - Some products have Relay set, but since they already made it Blinker LED Clear, it seems that the handling of Valve only products began, it is saved.
White & Orange is attached,
As in the case of automobiles, whitening the entire front is completed.
The picture is also a photo with LeftBlinker blinking.
White It is quite bright..
View detail