Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA
ODAX Daylight Kit
It is ideal for Touring. It is easy to see from quite a distance. The installation was a bit odd for Large, since I also installed the ON-OFFSwitch and Relay, so it was a bit odd for an amateur. View detail
ODAXBack fog
I like the way it looks! View detail
Valve replacement along with Headlight
Originally, the GSR750's Position lampCover was Blue, so the
Select Blue this time
The Forme is brighter than I expected and I am personally satisfied with the Forme.
Please note that the LEDs have polarity and will not light up if they are attached in opposite directions.
View detail
Now you're safe.
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good.
Recently I became really curious about it and found this in search of S25 Valve, the official standard.
Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.
View detail
bright
The white color is nice and bright when replaced with the yellowish color of the NORMAL.
Since it is LED, it is expected to be durable and will last for a long time.
View detail
Very good. There's nothing wrong with it.
I bought this to convert my SL90 to 12V.
Quality, light output, color, price all good!
I think I will buy LED bulbs from this manufacturer from next time.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
It's bright and snappy.
[How is it used?
One week after installation.
Was the one you received as per Image?
Just like the picture of the product.
Was the installation difficult?
I think it's easy if you have experience removing and installing Cowl.
How was your experience with it?
Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit.
The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on?
sufficient
[Was there anything that disappointed you?
Two points for me.
When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
The blackened version is very beautiful!
My motorcycle originally came with a yellow turn signal cover, which feels too rustic. After I bought this blackened turn signal cover on Webike and installed it, it feels much better, and it fits perfectly! Excellent workmanship! Remind everyone, use screws to unscrew the screw holes of the new cover before installation, it will be much easier to install! ---------------------------------------------- My motorcycle originally came with a yellow turn signal cover. I feel that the original turn signal cover is not good-looking. So I bought this blackened turn signal cover on Webike. This turn signal cover feels much better than originally turn signal cover, and it fits perfectly! The workmanship is great! I would like to remind everyone that before installation, use screws to unscrew the screw holes of the new cover. This will make the installation a lot easier! Powered by Google Translator View detail
Tension bombing at night for sure!
OEMTail lamp of ZX14R is [Color] The front of the bike was more white than clear, and the difference between the front's cool look and the rear's cheesy clear tail was amazing. [ODAX ODAX LED Tail Lamp] We have purchased the
Installation
Tail lamp installation itself is easy even for a beginner!
All you have to do is remove the Screw and replace the Coupler, so it's not too difficult.
……But there is a Screw in a very narrow place, so you have to work hard.
[Quality, texture, visibility
There is not a single defective LED on the Smoked lens, and it shines brightly.
If you see it at night rather than during the day, your Tension is sure to explode!
It's one of those things that happens when you change the lighting system, you change the tail lamp and it's like the whole motorcycle is new!
I was expecting the visibility to be darker than OEM because of the Smoked lens, but that was not the case.
It's rather brighter and more dazzling than OEM.
Conclusion
I think it's better to buy this one from the beginning if you're going to have a painful experience with a cheap no-name manufacturer's product. (Because the hassle of replacing and purchasing is dull)
By the way, I bought a very cheap no-name Manufacturer's Tail lamp once and it hurt me……lol
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Parenthesis good!
I couldn't resist the protrusion of Blinker and bought it Parenthesis is better without the protrusion! Installation also Quantity:Pair (for Left and Right) It only takes 30 minutes to do it all together View detail
Date Light added
I chose this product for the Daylight and LED Blinker
There is one more similar product, but it is more expensive because of its multifunctionality …
In this case, it's very inexpensive and very well made and very good in total with Rear!
I think you should be comfortable with the Cowl removal and Wiring process for installation!
If you're not sure, you could hire a motorcycle shop to do it for you
I can switch the Switch on and off in the middle of the car because the law has changed and it's suspicious I'm playing with it
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Cospa high!
In blinker LEDization, you do not have to mess with Wiring and do not need any special knowledge.
Simply complete with a popping.
Especially it can be used without errors in use!
View detail
It's neither good nor bad
I exchanged with the Rear blinker ball of NINJA 400 2017.
Valve The LED with a high height interfered with OEMLens, so we chose this item with a low height.
It does not interfere with Lens and its price is also inexpensive compared to other companies, but the light intensity is enough though OEMLens is Clear.
Kawasaki may be part of it, but Valve's Lock pin becomes angle Type.
Please be aware that you can not install if you purchase equilibrium Pin by mistake.
View detail
Slightly high
It is easy to install because it only replaces Valve very brightly, but it is better to increase the price slightly, preferably ICRelay at the same time if possible, however, because the PC 40 reverse car has Motor for exhaust Valve and there is almost no space It is difficult to let the 3-wire Type Resell etc. Conversion Adapter for 4 wires etc. View detail
Amount of light attached to the GSR 250 ○ Brightness at normal time and braking ○
When I pulled the Brake lever with IgnitionOn, the brake light glows and at the same time Flicker was interested in the LED of the Front's LED. Although it is the one electric bulb, although I looked for LED Lamp at the Motorcycle shop because of the high power, many that will cost 4000 or more Many LED Lamp 1 pc. I thought that 4000 yen is unnecessary, and when I search by webike it was ODAX's LED Lamp that I did Hit.
I do not hear Manufacturer and the real thing (Exhibition) I was worried because I could not see it, but the quality of the product, the brightness after installation has no problem, the price was also cheap so it is a satisfying product.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
Stealth
It will be Prismatic StealthBlinker.
There is no problem with the amount of light at the time of light emission, and I like the color tone very much.
After that, how durable is it?.
If the price is a bit cheaper ...
is not it.
View detail
Image, renewal!
I seemed to change the Position sphere as the Point was about to expire.
I changed the warm color system of the OEM to a cold color system instead of the LED and I wonder if the little fearlessness has been upgraded.
Actually Low beam is always on, so I do not know.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Can be panned
When making it LED, when high flasher measures to prevent purchase without using purchase installation, you can remove the Cover and attach it. Although it is using about one year after installation, there is no malfunction, etc., the price feels unexpectedly high. View detail
It is the 2004 CB 1300 SF in 2004.
Although I have a Position feature at my pace, I guess because it is a Smoked lens, it was dark and not noticeable at all during the day. Since Rear has already been LEDized, this time I purchased Valve of two color emission with Single Item.
Although I made it to Blue & Orange conspicuously like during the day, I feel a bit Mischief ... Smoked lens Motorcycle It is a moving image lighting the projector from the front but I think it is pretty bright as it is flashing well. Relay is Posh's Wide watt blinker relay, but there is no problem with regard to operation.
When choosing Blue & Orange, I examined Motorcycle's Position lampBlinker, but eventually it was a Gray feeling. So installed it without worrying.
If the OEM is a bulb with Orange Lens, it costs a considerable amount in total, but I think that it is a recommended item to make use of the Position lamp function.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Ninja400R, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI ZRX1200DAEG, KAWASAKI Z250
Looks good
【What made you decide the purchase?】 Coolness of Smoked lens. Goodness of Cospa.
【How was it actually used?】 By Blinker becoming dark, it blends into the car body and it is cool!
【Was it difficult to install? (Hard parts case)】 Just tighten with a thin Screw. Easy. Be careful not to lick it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Please do not tighten Screw tightly until the end or it will open and water will enter, so please tighten securely.
【Fit feeling and height when wearing - Please tell me your weight etc】 None
[Is there anything I was disappointed about?] It is not..
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think that it may be a little cheaper.
【Have you compared items?】 KIJIMA's Smoke Blinker Lens.
View detail