Reviews
work stoppage
I purchased the Front and Rear ODAX products, but the Relay Conversion Wiring, which must be included on the Front side, is not included, so my work has been suspended.
I had trouble finding the Wiring image connected to Relay in the Instruction Manual.
View detail
Required processing
The size of the aluminum material imported from large land was not suitable for the front side of R1, so it needed to be processed.
I bought it with a faint hope that I might be able to wear it Exactly. I bought it with faint hopes that it might be possible to install Exactly.
As a result, the Size does not fit on the front side of this product as well.
It is one size larger than the for Blinker hole in the Cowl.
However, this product is Material:Plastic is easy to process.
I was able to fit it after shaving the whole thing down and making it one size smaller.
I would like to install it without any modification if possible. If you can do it yourself, this is a good part because it is inexpensive.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
It works without any problems!
I bought it because NORMAL Design is terrible.
Installation is easy
It's just that it's smaller than I thought it would be.
It may be a little hard to see from the front, but the brightness of the LEDs works just fine!
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
I'm so sorry!
I proceeded with the purchase, confirming the request, but unfortunately it didn't fit. 。 He gave a detailed explanation and gave up.
Thank you for your kind explanation and support.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
Visibility to the other side is poor.
I didn't like that protruding blinker, so I replaced it.
It looks Refreshing, but it's pretty Smallish.
I might have an accident one day and I'm going to put it back together.
Are you sure you're up for this? Go ahead.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
R25 (2019) It needs to be machined for installation to
I have no problems with the performance and texture. It's very good.
ODAX's ICRelay "OX-K60-R. It emits light from inside to outside without any problems when used with
The problem is installation.
The Honda Small Dice Bullet Terminal on the Blinker side (Male) It is not the same as the
BlinkerCable's Bullet Terminal for the 2019 MODEL R25 is a general Bullet Terminal (Female) So,
It is not possible to connect as is. The Bullet Terminal must be replaced separately.
(Guaranteed to fit, though...)
Also, although the Front is a sufficient Cable length
If you want to pull from the Rear OEMFender, you need to extend it by yourself because it's not long enough.
In the case of a Fender Eliminator, for example, it would be Large.
The Blinker Base we bought together WMB-207066. We also had to deal with
That will be noted in the Review there.
View detail
R25 (2019) You will need to be creative when installing it in the
There is no Instruction Manual, but it is stamped with A and B. A is the one with a little large texture.
Although I imagined that the Blinker Base would be used in a pinch.
R25 (2019) I could only use A on the outside for the front cowl of the
I was going to put a B inside, but it does not fit the size of the hole.
It's a universal product, so that's what it is...
Sequential Blinker from the same ODAX "OX-RM001LW-Q-C I'm using it at the same time as
Washer for Flat Parts and Large-textured 8mm stopping OEM Blinker
You can manage to fix it by using it.
It was not possible to install it on the Rear with this product alone.
Base 97420 for DAYTONA's Yamaha/Kawasaki fits in the Rear.
Honestly, I should have used the DAYTONA guy for the Front as well.
View detail
It's also fashionable.
The Color Film is attached to the attachment, and I was wearing the Yellow Color Film. The conspicuousness was preeminent and always attracted attention with the color of Headlight which is different from others. The installation was installed in ZX10R of 05MODEL (C type) which was riding before, and the Valve shape was H7. But I had a hard time because I couldn't install it without modifying the cover on the back of the headlight. View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
The thing itself isn't bad
I thought it would be easy to use a Phillips Screwdriver 1 pc since it was only for lens replacement, but If you tighten the Screw about halfway, it may become hard, and if you tighten it too hard, it may break When I checked, it was the size hole of the Smaller Screw
I had no choice but to widen the hole by 1mm It took a lot of work
View detail
Satisfied
The price is cheap for LED,
I think the lighting situation is bright and easy to see good product,
Fairly LED products are expensive but I think this price is a good deal.
View detail
RearBlinker purchase for removal
First of all, as a precaution when installing, it is necessary to scrape out the hole and expanding it because the Pitch of the Mount part is misaligned.
So, installation may be difficult unless it is a person who can process to some extent.
Also because Lens is Clear type, visibility in the day was very bad so we used Smoke paint and use it.
For the above reason I think that it is better to refrain from purchasing unless it is a processing premise.
I am sorry that the product Concept is so wonderful.
View detail
I am repurchasing
I used it for about two years and it is a replacement as I can not use it.
I feel brighter because I replaced it
Since it is an overseas product, the hole position does not match, it is mounting installation by expanding the hole.
Because the luminosity of the Blinker part is low, Blinker does not remove it, it makes it DoubleBlinker.
View detail
It became SMART
Tail lamp - It is a Parts that combines both Blinker.
After installation it became very good SMART.
- Attention point of installation (Depending on model) It is better to raise Tail cowl slightly.
- Because there is a little gap in the hole where Wiring comes out from Unit, I flowed Silicon.
View detail
It exchanges simultaneously with a relay of the company. A bright time zone is felt a little dark. The number of times of lighting is satisfactory. It seems that the burden of the after [ ] Battery was eased considerably.
It exchanges simultaneously with a relay of the company.
A bright time zone is felt a little dark.
The number of times of lighting is satisfactory.
It seems that the burden of the after [
] Battery was eased considerably.
View detail
Fits: KAWASAKI , KAWASAKI ZX14 series, KAWASAKI ZZr system, KAWASAKI ZXR series, KAWASAKI Ninja Series, YAMAHA
It exchanges simultaneously with the Valve of the company. The number of times of lighting is satisfactory. It seems that a Blinker display stops however, functioning on an Instrument panel as one thing not removing the ball of an Instrument panel direc
It exchanges simultaneously with the Valve of the company. The number of times of lighting is satisfactory. It seems that a Blinker display stops however, functioning on an Instrument panel as one thing not removing the ball of an Instrument panel directly. If after voltage is less than 12v, blink stops stabilizing. It seems that there is affinity by a vehicle type also by a Kawasaki vehicle. View detail
The yellow portion of the blinker of the true integrate taillight is red except the time of stoplight lighting. The yellow of this article is in a red portion independently. It says strictly and is not integration. Although I understand from b
The yellow portion of the blinker of the true integrate taillight is red except the time of stoplight lighting.
The yellow of this article is in a red portion independently.
It says strictly and is not integration.
Although I understand from before purchase .. Without being too large in design, since he likes, it has purchased.
However, there may be some users who mistake from naming called integration,
View detail