Reviews
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Blinker's handy LED
'99 Equipment GSX1300R HAYABUSA Blinker installed to make LED.
【Quality / texture】
I think that there is no need to worry about texture because it is an invisible place.
There are no defects with functional problems, Size is similar to OEM and it is normal.
【Performance / Function】
Partly only with LED, all LEDs work fine.
I have not received a car inspection yet, but the flickering interval seems to be problematic.
If there is a drawback, the moment when you switch on starts with Timing of "blinking" of flashing, there is a momentary time lag from when you press Switch to when Blinker glows.
I do not mind so much as there is no hindrance to driving.
Not only this item but the fate of IC Blinker Relay, but even if the Valve expires it will not be High flasher and so we need to check regularly.
【ease of use】
This is undisputed.
Although Universal IC Blinker Relay is inexpensive and commercially available in various ways, in case of installing a common Universal Blinker Relay to 7 pin model, 6 V MONKEY / It is necessary to disconnect GORILLA Main Harness.
There is also an option to let the Blinker side resist resistance without changing the Blinker relay, but in that case, consideration is necessary for assembly as resistance has heat.
This product is unnecessary for such preliminary examination and consideration, it is OK simply by inserting it as an OEM Product.
【Cost performance】
If you consider Universal Blinker Relay you can buy it for hundreds of yen, the honest price is expensive.
It is unlikely that it will be higher than the Universal Product as long as the available models are limited...
What you think of Chinese Copy items is Amaz ○ Because it is about half price in n, let's balance reliability and wallet.
【Review】
The price is expensive, but it is good with machining unnecessary pon.
If there is no resistance to Harness's processing and there is reasonable knowledge, there is a means to make it cheaper, but I think whether it will become a sufficient choice if you want to go with cheap till you get a gold.
View detail
Garbage ? ? ? Wonder?
Proceed work according to the Instruction Manual, installation completed without problems.
Confirm lit.
After 2 days, Gasoline meter not lit ? ? ?
Inverter No abnormality.
If you open the Meter again and check it, it is confirmed that the flow line of the EL and the contact portion of the electrode are defective.
After that, a water temperature gauge, Speedometer and then unlit.
What is it supposed to do?.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Cospa high!
In blinker LEDization, you do not have to mess with Wiring and do not need any special knowledge.
Simply complete with a popping.
Especially it can be used without errors in use!
View detail
It's neither good nor bad
I exchanged with the Rear blinker ball of NINJA 400 2017.
Valve The LED with a high height interfered with OEMLens, so we chose this item with a low height.
It does not interfere with Lens and its price is also inexpensive compared to other companies, but the light intensity is enough though OEMLens is Clear.
Kawasaki may be part of it, but Valve's Lock pin becomes angle Type.
Please be aware that you can not install if you purchase equilibrium Pin by mistake.
View detail
First, the exchange is completed, White is bright
We have completed exchange installation from OEMPosition lamp to this item. White will light up brightly even during the day. Since Headlight had been converted to LEDs earlier, Balance improved with this. It was slightly uneasy that the replacement work had gotten caught in the shallow stage of the Socket when inserting this LED, when OEMPosition was removed from the Socket, that the workability was poor if Position had almost removed the Full cowl, was. Sometimes I was not used to Valve of T10 Type, I was lost in the power adjustment. Although the main driving was only during the daytime, I felt that even a little bit leads to visibility. View detail
Slightly high
It is easy to install because it only replaces Valve very brightly, but it is better to increase the price slightly, preferably ICRelay at the same time if possible, however, because the PC 40 reverse car has Motor for exhaust Valve and there is almost no space It is difficult to let the 3-wire Type Resell etc. Conversion Adapter for 4 wires etc. View detail
Amount of light attached to the GSR 250 ○ Brightness at normal time and braking ○
When I pulled the Brake lever with IgnitionOn, the brake light glows and at the same time Flicker was interested in the LED of the Front's LED. Although it is the one electric bulb, although I looked for LED Lamp at the Motorcycle shop because of the high power, many that will cost 4000 or more Many LED Lamp 1 pc. I thought that 4000 yen is unnecessary, and when I search by webike it was ODAX's LED Lamp that I did Hit.
I do not hear Manufacturer and the real thing (Exhibition) I was worried because I could not see it, but the quality of the product, the brightness after installation has no problem, the price was also cheap so it is a satisfying product.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
Stealth
It will be Prismatic StealthBlinker.
There is no problem with the amount of light at the time of light emission, and I like the color tone very much.
After that, how durable is it?.
If the price is a bit cheaper ...
is not it.
View detail
good
I wanted to customize around Handlebar, so if I was looking for Meter's Custom that was the most visible first, I found ODAX's El Meter Panel ??
Purchased this item because it was a product that just pasted and was OK.
Paste the double-sided tape between OEMMeter and just connect Wiring.
(important point)
Double-sided Tape is sure to use a thin Type ??
In the case of me, the thickness of the first thick double-sided tape was pasted, and it interfered with the Meter needle. "Meter broke (? д ?) ??" I thought it well and well researched, it was the cause.
Everyone please note.
Since Base is White, it is a product that tickles the Biker heart with beautiful daytime visibility UP, and beautiful Blue of ELLight at night.
View detail
Fits: SUZUKI GSR750, SUZUKI BANDIT1250S, SUZUKI DL1000 V-STROM650
Satisfied with a tight feeling
It is Recommendation because it seems definitely fearless if it is Body color of DARK type. (Orange colored Blinker floated with Gray's V St 650) I also thought that it might be OK even if WhiteLens for OEM diversion but this is Smoke and it is Large correct answer!.
OEM It is the same shape and easy to install, but cutting the Screw mountain is a bit annoying (It is necessary work even in OEM)
Because of Amber 's Valve, Smoked lens I feel I am a little dark honestly. Let's change it to LED
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI V-Strom1000, SUZUKI SV650, SUZUKI SV650 X
Sokosoko dense Smoke
I put in Amber balls, can you see it a little?. Even if it is not a Plating ball, it does not matter. After replacement the car body looks tight. View detail
Fits: SUZUKI SV1000, SUZUKI BANDIT1250S, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI BANDIT1250F
Position light does not work properly
As a set of LED Blinker and Clear Lens, a perfect score evaluation without question
But Front's Position lamp does not become usable at all
Do not return to Position lamp after Blinker is released
The state that Position is not lit up again in a few minutes before unnoticed
This symptom does not occur in the key On state, it occurs when the Engine starts
Because it does not occur in the Filament sphere, the setting of the voltage threshold may be wrong
I'm thinking of Position's WiringCut because I am out of security standards
The attached Relay itself also behaves suspiciously and the Blinker indicator gets rampage
Only the Blinker operation can be used stably with KIJIMA's Relay
Both Blinker and Front position have sufficient light intensity and can be used with confidence
Because there is no Amber ball in Clear Lens, looks will be very good
Easy to install even knowing the location of Relay
It is a pity that only the behavior of the Position lamp is disappointing but it may be Rare Case because other things are not written at the Review of others
View detail
Image, renewal!
I seemed to change the Position sphere as the Point was about to expire.
I changed the warm color system of the OEM to a cold color system instead of the LED and I wonder if the little fearlessness has been upgraded.
Actually Low beam is always on, so I do not know.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Can be panned
When making it LED, when high flasher measures to prevent purchase without using purchase installation, you can remove the Cover and attach it. Although it is using about one year after installation, there is no malfunction, etc., the price feels unexpectedly high. View detail
Visibility is extremely satisfying - - -
Although it is attached to GSX 1300 R HAYABUSA, it is relatively easy to install it if you can remove the Meter, but in 5 months or so the fuel gauge will not light up in about 5 months, Wae Big will request inspection from Manufacturer to Manufacturer Even though we will correspond with it, after all, it returns without any abnormality, again mounting does not turn on again.
Manufacturer said that there was pressing pressure on Cable, but since it is in a state that pressure is imposed on the wearing state, at the time of inspection it is probably whether the inspection was in Panel intact state.
Also, I think that there was a problem when sending items that were sent back after inspection, but despite having Double - sided Tape on the back side, the Panel was carefully superimposed and the dirt attached to Double - sided Tape Is dirtying the White Panel Cleaning up.
I took it inevitably using OACleaner etc., but a little dirt remained (^ ^ ゞ
Although I am very satisfied with the visibility, it does not become regrettable as there is any correspondence with Others.
View detail
Satisfied
The price is cheap for LED,
I think the lighting situation is bright and easy to see good product,
Fairly LED products are expensive but I think this price is a good deal.
View detail
White It is
In 14 years after purchasing 14 GTR, the Position ball has expired and replaced. OEM was Yellow seemingly but LED was truly white and cheaply made Makeover, I am satisfied. View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Mounting on GSX 1300 R HAYABUSA. Easy to put on!
Because I changed the Blinker lens of GSX 1300 R HAYABUSA to Smoke
Together, we introduced this product to try to convert it to LED to increase the stealth property of Valve.
Left Side of Relay's photo is ICRelay
Right Side is OEMRelay.
OEM Product stamp etc etc. Yes, ICRelay looks a bit crappy because it is slippery.
I do not care what it is because it is an invisible part, but I think that it would be appreciated when I forgot to know what type of maker was later the model number later.
The installation place of GSX 1300 R HAYABUSA is in Inner cowl under Left Handlebar.
It is designed to be removable after removing Cowl around Meter.
By the way, Front Blinker Bulb does not have to remove Upper Cowl
I can manage somehow by removing Inner cowl and holding hands.
View detail
Large I am satisfied with satisfaction !?
A new design has appeared, but I tried installing it because I liked this design. Panel itself was softer than I thought it was easy to put through the needle.
Where to take a moment, I struggled with the final positioning when pasting Double-sided Tape on the back, so I thought it was okay to open the gap and shorten the Tape. Sure enough, the position of the round hole in the center has gaped a little to Right. I am going to fix it in a strange place and I will scoop up again after a week (Lol) I got dark and saw Meter, I got a little bit busy. Controller of dimming think that Space under Kawasaki Emblem fit perfectly and it is perfectly refreshing. The Instruction Manual was kind and Wiring was easy.
View detail
Feelings are different dimensions Racer.
XJR1300 / It is equipped with RP 03J.
Because the car body is blue,
Natural color development is also Blue selection.
Even at the time of purchase, expectation was there as it was,
In reality when you see nighttime light emission,
I feel relaxed at once..
The trouble of mounting,
Since it extends completely to the light valve,
I felt a little thought.
But it is a satisfaction recommendation exceeding that.
View detail