Reviews
The product is Well, and a good impression is made!
The product is designed to be used with the thickness of the Screen and [Color] I think that both the Smoke and the accuracy of the BKT installation are good.
[Color] We chose the darkest Smoke and the most expensive Screen, and we like them in terms of design.
The darker screen provides well forward visibility even when it is cloudy in the daytime, and I feel that the height of the screen is also necessary if you want windproof effect.
Screen strength also seems to be fine at CircuitLevel Speed.
The only reason I couldn't give it more than one star is that there were no instructions on how to install it and I couldn't figure out the proper way to install it.
I used 4 bolt nuts on the Headlight BKT and modified the included BKT a little to install it, but I feel that this method is better in terms of strength.
Overall, I believe we have completely fulfilled the need for increased windproofing while maintaining helicopter TESIStyle.
View detail
Not as long as a Long.
I ran with it on properly without thinking about the angle, but it still worked.
I think it would be even more effective in a more upright position.
Light smoke seems a bit thin.
But with Dark smoke, it seems too thick.
View detail
[Color] Smoke is good!
The well nut attached to the OEMScreen does not fit in the small hole in the screen, and the hole must be widened to a large size with a file.
Loved the look of it.
[Color] Smoke is matched with Black Body.
Windproofing looks almost as good as NORMAL.
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR
Hmm
I had not planned to replace my screens with anything other than an OEMScreen because I thought it would ruin the look of the screen, but since the OEMScreen is not windproof at all and I use a CB as a tourer, I got tired of it and bought this screen. First of all, my requirements for the screen were that it should not look too large and that it should have a shape that would provide windproof performance. I had no idea what it would look like because I didn't see any pictures of it from the front in other reviews. To be honest, I was worried because BOLDOR looks very tacky like a raven hat with an external Screen. I have a picture of it on my phone, but I think it looks cool in person, although the BOLDOR screen looks a little tacky due to its poor photo quality. There was a review that said the color was too light, but I think the OEM screen's color was originally too dark, so I'm not sure why. [Color] I thought Smoke was too dark and tacky, so this color is just right for me. The windproof effect is that the wind that used to hit me up to my chest now hits me above my shoulders, so I can probably ride comfortably even at 100 km or more on the highway. When I installed it, I thought it was not so good, because the screen itself is thin and there is a gap between the cowl and the screen in case of CB400SB. To tell the truth, it is not so nice, but I could not see it unless I look at it very close and it has a good windproof effect, so I decided to put up with it. Also, the seal called "ODAX" on the left side of the screen is tacky and I wish they didn't put it there. (We plan to remove it later.) The middle of the space is raised when viewed from the inside. The middle of the space is raised when viewed from the inside, so it looks like Dustcloth could be placed in that space. View detail
Fits: HUSQVARNA SVARTPILEN401, HUSQVARNA SVARTPILEN125
Wind protection is moderate
I installed this product with the expectation of Wind protection against wind when driving at high speeds.
The effectiveness of the program was not as good as I had hoped.
Is the wind hitting the chest area somewhat reduced? It is about the same.
If protection effect is important, Long Type may be better.
To be honest, I thought that Svartpillen's design was the coolest in its original form, and I was a little worried about the looks of the product because the only pictures on the product page and the Manufacturer's Site were of the product in the up view, so it was hard to imagine it with the product attached. I was a little worried about the looks of the product, but when I actually put it on, it was much cooler than I imagined.
I will give more photos for the reference of others.
As for the quality of the product, it is not bad at all, but it would be nice if more work could be done on the edge of the Screen (there are some marks left on the edge of the Screen, like a cut).
When I try to insert the well nut (the one with the nut inside the rubber) into the bracket hole, it does not go in at all.
It is smoothest to insert the one with the flange by squeezing it.
The Bracket is assembled before the Screen is assembled, but the Bracket should be temporarily fixed to the extent that it moves lightly, and the Bolt of the Screen should be tightened evenly etc., and then the Bracket should be tightened at the end for successful attachment.
View detail
I wanted the Seal to be attached separately.
I understand the desire to put a 3D Seal of Manufacturer, but I did not like it and it was a little troublesome to peel it off.
I made it Short, so it is a good windbreaker.
It can be installed on a 21-year z900 without modification.
The strength of the screen itself is not inadequate.
Note that the OEM bolt used to hold the meter cover and the bolt used to install this product are different in hexagonal size, requiring a smaller tool than the OEM bolt.
Pushing the Large popular car model, we dared to choose the z900.
We can fully recommend to such eccentric people.
View detail
You were right about the exchange.
Design and usability are good. However, the thickness of Screen is not enough for the fixing screw as it was in the impression.
I am a Material:Insufficient thickness was adjusted by RubberPacking.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT03
A little expensive but generally satisfactory
Was the one you received as per Image?
Especially, there is no dissatisfaction point. I feel that Cospa is never the product which is good, but because the flatness of the feeling of Y's GearOEMScreen and the extremely SmallScreen which is the effect none of the North American Yamaha were dissatisfied and it chose, it is satisfaction.
Was the installation difficult?
All you have to do is remove the headlight cover with a hexagon and tighten it together with the supplied bolt and collar. There is no wobble etc. especially.
How was your experience with it?
I think the driving wind has been reduced. It is about. Originally, I didn't expect so much windproof effect on the appearance, so no problem.
[Included Parts:were they on?
ScreenBody, Collar×2, Bolt×2, Rubber×2 for vibration isolation, Instruction Manual.
[Was there anything that disappointed you?
The surface was small scratches or a little rubbed, but since it is an imported product, it is like this.
[Point and hang of installation].
When you remove the OEM Cover, the Bracket of the CoverReverse side will also come off together, but be careful because the Rubber which is bitten on the joint part is easy to fall off.
Also, be careful of the tightening torque as the Bolt is tightened with the collar in between. The Bolt can be tightened without limit, so if you tighten it too much, one of the collar, Screen or Bolt may break. Tighten in moderation.
[Others]
The size of the bolt is shown in the instruction manual. (I believe M5×30)
agent (Odax) I bought Dark smoke on the direct sales of the company, and at first they replied that the delivery time was 1 month, but it was suddenly shipped in about 3 days! (Delighted) . Maybe Manufacturer has them in stock?
View detail
Easier on the highway than NORMAL.
I bought it to make the windshield large because I want to run comfortably.
It became easy at high speed, but I also feel that the wind to the body is not prevented as much as I thought because the width of Screen is narrow. The wind hits the shoulder from the arm normally.
In order to use the Smartphone Holder, I wanted to make the angle stand up a little, so I adjusted it with the Spacer under the Screw.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4
I bought it because I get a lot of wind.
"DUCATIPerformance
I haven't done any highway driving, but the Screen is still quite effective.
However, when Screen is attached, the design is still a little unacceptable. (Kills the original Design) I've become a
Implementation itself was easy, but if you have a Smartphone Holder on your Handlebar, it might interfere with the Screen.
View detail
Screen
I didn't like the design of OEMAttachment's LargeMeter cover very much, so I bought this Screen when I was looking for something else.
When I saw it in the picture, I was worried about the large size, but when I actually installed it, I didn't care about the large size so much.
It seems to be very effective over 80 km on the highway, and the driving wind has been reduced considerably.
View detail
I'm pretty sure it feels like the wind has changed.
I feel like I'm getting less wind at high speeds.
However, I'm not sure if I'm worried about Meter and other images appearing on Screen.
I have a feeling this is better than the OEM parts.
View detail
It's hard to get the speed out of NAKED.
I bought it because I bought a strafe fire in cool, but I could barely hold on to it when I put out the Speed. Now, it's a nice windbreaker, it's the best. Yay! View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT03
Pretty good! Highly recommended!
i ordered it directly from ODAX because I don't know when it will be in stock on webike
It is easy to install. and it takes about 5 minutes to install
It's good that the wind doesn't come directly to your chest area
SizeLarge texture, so you can't complain about how it looks from the front
View detail
I don't feel much of a rectification effect
I really like the design because it feels like it's one with the motorcycle
However, as for the rectification effect, size is much larger than NORMAL
Not only is it not up to the point where you can feel it, but it's more than NORMAL
It felt like the air currents were disrupted
View detail
very good
It is much more windproof than the Standard Equipment ones I'm glad I changed it because I don't have to bend over to get the wind
It's very good for those touring
View detail
I'm happy with the product I installed
There were no problems with the hole dimensions or the installation itself
When transplanting the well nut, it is not easy to get into the well nut because of its hardness, so it is not easy to get into the well nut with detergent I feel like I've been there
I used it both on the down-roads and on the highways, and I could feel that the way the wind hit my body changed in both cases
The splitting of the Screen is a little annoying
View detail
Soft? ……bent
Quantity:1pc. the eye was torn off in a minor accident or contact and
The second one is not for touring as much as I thought
I'm buying a third copy of ODAX
Maybe it's because it's close to OEM and has fewer curved surfaces, or maybe it's because it's so close to OEM …
ProductSingle body with a thick but strong "flexing"s ;A product with weak koshi"
In the Screen Bar Holder made by DAYTONA
Because I'm mounting ETC Antennas and Drorekos
If you install it in a normal way, it will hit you
The spacer which has 1.5cm thick width is applied to the 4-point Bolt, but the tip of Screen " numbness"
As far as screen effects go, it's a good one
In the middle position, the wind will flow well over the Helmet
This makes it easier to use at high speed
After that, you need to be careful when you attach a drorecorder because the processing of the perimeter of Screen is not good for about 1cm
View detail
I like the slim design
The OEM is too small, so I decided to install an outside one I couldn't decide which one to choose The design of the motorcycles is also very well designed I chose it for its quality and low price View detail
I think it's a no-brainer to buy it
I bought it because the Screen of OEM is too small I think the letters GS are cool too
Installation is simple, but the rubber packing on the OEMScreen Even if you install the screw and tighten the screw, there will be a little gap and it will be a little wobbly However, since there is no problem for driving, if you check the Screw is not loose before driving, you can use the Large I think it's strong
I felt like it had some wind protection I didn't feel like it was dramatically windproof, but I like the overall design I'm glad I bought it
View detail