Reviews
I don't feel much of a rectification effect
I really like the design because it feels like it's one with the motorcycle
However, as for the rectification effect, size is much larger than NORMAL
Not only is it not up to the point where you can feel it, but it's more than NORMAL
It felt like the air currents were disrupted
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
very good
It is much more windproof than the Standard Equipment ones I'm glad I changed it because I don't have to bend over to get the wind
It's very good for those touring
View detail
I'm happy with the product I installed
There were no problems with the hole dimensions or the installation itself
When transplanting the well nut, it is not easy to get into the well nut because of its hardness, so it is not easy to get into the well nut with detergent I feel like I've been there
I used it both on the down-roads and on the highways, and I could feel that the way the wind hit my body changed in both cases
The splitting of the Screen is a little annoying
View detail
Soft? ……bent
Quantity:1pc. the eye was torn off in a minor accident or contact and
The second one is not for touring as much as I thought
I'm buying a third copy of ODAX
Maybe it's because it's close to OEM and has fewer curved surfaces, or maybe it's because it's so close to OEM …
ProductSingle body with a thick but strong "flexing"s ;A product with weak koshi"
In the Screen Bar Holder made by DAYTONA
Because I'm mounting ETC Antennas and Drorekos
If you install it in a normal way, it will hit you
The spacer which has 1.5cm thick width is applied to the 4-point Bolt, but the tip of Screen " numbness"
As far as screen effects go, it's a good one
In the middle position, the wind will flow well over the Helmet
This makes it easier to use at high speed
After that, you need to be careful when you attach a drorecorder because the processing of the perimeter of Screen is not good for about 1cm
View detail
I like the slim design
The OEM is too small, so I decided to install an outside one I couldn't decide which one to choose The design of the motorcycles is also very well designed I chose it for its quality and low price View detail
I think it's a no-brainer to buy it
I bought it because the Screen of OEM is too small I think the letters GS are cool too
Installation is simple, but the rubber packing on the OEMScreen Even if you install the screw and tighten the screw, there will be a little gap and it will be a little wobbly However, since there is no problem for driving, if you check the Screw is not loose before driving, you can use the Large I think it's strong
I felt like it had some wind protection I didn't feel like it was dramatically windproof, but I like the overall design I'm glad I bought it
View detail
Balance of Sporty looks and adequate windshield performance
Although OEMScreen looks very good, windproof performance is not so good. However, if the height of Screen is set at the top, Protection improves, but it looks like a sense of Koreani. So I decided to replace Screen. OEMLong Screen ? MRA ? Although I was troubled with Odax, intuition makes this Screen of Odax.
■ About Protection
First stage : It was Protection with no difference between the first row of OEM and Large.
Second stage : The same degree of effect as the third row of OEM. The appearance was also within tolerance so fix it in this.
3 rd stage : I have not tried it yet. It looks like it looks too good. I will give it a try if you feel like it..
It's good to make it, Ninja's Logo is in the part where Black is painted, I like the appearance.
However, it is a little troublesome to have to bite the attached Spacer during installation.
View detail
I am satisfied..
Well nut 's hole fits Small and it is supposed to be inserted from the other side, but it was possible to install it without problems.
Compared to NORMAL, it can run without receiving much wind.
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR
ODAX ODAX :POWER BRONZE Air flow
I installed it in CB 1300SB.
Since it is necessary to remove Cowl for installation, it is troublesome in any case.
The shape is cool with Race ish. It is quite a light smoke
It is Light, but ,,,
There was also in Impre of the other, but there is a difficulty in adhesion. My situation
The close relationship between Screen and Cowl was not good. As both ends are floating
I can see.
Regarding traveling, I do not know for the amateur.
View detail
Can be used with OEMKnuckle guard
Since OEMScreen of RC 90 has been extended Length
Is Manufacturer judged to be sufficient? There is no indication that Long Screen will appear.
But still the wind that blows on the body is fine, so from OEM as a natural desire
It is something that seeks a long Screen.
Unfortunately ODAX's Screen is out of Lineup with less choice
I was curious,
I hesitated quite a bit because I have to think about compatibility with OEMKnuckle guard,
I tried to compare it with various images and decided to buy it with no good.
It was presented that the delivery date is about 3 weeks but it arrived safely after some advancement
Immediately test.
There was absolutely no interference of Knuckle guard that I was most concerned about.
I think that those who ride RC 90 are also concerned with this part.
So if there are those who are interested, please purchase with confidence
Large I think it's tough (* I bought it is 50 cm person)
But if you mention the difficulty
● Clearance with Body etc.. Quantity : Pair (for Left and Right) Clearance is not a bit symmetry,
It seems that the making is slightly rough.
● Since the mall is not attached, the part of Edge may be concerned somewhat
--What a place, such as.
Personally I am satisfied almost as simultaneous use with OEMKnuckle guard was premised on Large.
As for the windshield effect there are individual differences, so I think that it will be hard to become a standard for evaluation
On the expressway I thought that the wind has been alleviated much more than before.
I am looking forward to the next Long touring.
View detail
Because it is an overseas product, this is...
The white spots often found in OEM Screen appeared, so I exchanged it.
Since MRA's Screen does not like shape, I searched for a material that seems to be good for Material in a shape close to OEM Product as much as possible, and it has arrived at this.
Material is good, but it is still a matter of processing technology, Quantity : Pair (for Left and Right) It is not symmetrical.
Depending on the viewer it may be unacceptable range so we recommend confirming the real thing before purchasing.
View detail
I am satisfied..
In OEM's Spoiler, A little little impression was thin so I was looking for various things, but my ninja was 2017, so if it was from another company, it was sometimes that one mounting hole remained One SportsAero flow came out of ODAX So I decided to purchase immediately. Easy to install and compared to OEM, the height also 2 cm Up and I liked the appearance very much. View detail
It can accelerate easily (? ∀ ?)
Power bronze is 330 higher in height than the products such as mra, but windbreak effect is firm and Stylish.
Height of 175 cm can prevent the wind down to the neck.
It was good that I could feel the benefits of Screen from the initial speed to the high speed.
Installation is mounting Bracket temporary attachment Screen temporary attachment Screen removal removal Bracket book attachment
Screen is the main attachment.
View detail
Just right Large
Not purchasing to seek windbreak effects, but rather insects etc. at the time of high-speed running on the back of Meter etc.
I installed it to prevent sticking, so I do not mind the rectification effect at all
I think that there is almost no effect.
I also bought a pouch's Cowl, but as the light gaps were too big to be perceived
I bought a new one here.
View detail
I will not let go buy it..
Although I can not say that it has a stiff effect on the streets, the difference will come out when riding for a long time. Also, I like the design that does not break the OEM's style. View detail
It's a dry score, but it's overall good.. Some people said that Seal is sticky. I thought I was going to peel off, but the present place is keeping the status quo ....
Changed from Standard color Clear to Smoke color.
Although my preference is divided, I personally think it looks tight and cool.
This product is thicker than the Standard Product, firmly
I have a feeling..
I'm looking forward to seeing how much different on the highway.
View detail
It looks like Sporty
Although it is installation, it was pretty much Large strange.
I was concerned about holding the four Spacers down so as not to drop them and tighten the screws.
Also, dark smoke has dust adhered. Especially static electricity will cling to you.
Seal of Power bronze was pasted on ScreenLeft Side, but it is very dirty (Leaving dust on) Since it was affixed, I immediately peeled off.
I think the rectification effect is good. Sometimes it was more exciting than NORMAL, I felt the wind was flowing over the top of Helmet.
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR
Although it is Light smoke it is thinner than OEM
Shape and wind break effect are nice, but I am sorry that the color is disappointing. It was a bad thing that I had not watched other people's impression well, but at the moment it arrived, I thought it was a mistake. I think that it is easy to see when traveling at Tunnel, at night, etc. However, since daytime is mostly used frequently, I think that it will be to paint a color by looking at the situation. View detail
Looks is quite up and it is GOO!
This time "Appearance" I did a Custom that emphasizes. Even in the NORMAL state it did not hurt at all, but there it is Custom's bug - - - In other words. Check our Custom example as Iloilo at this site and others "POWER BRONZE Air Flow Screen" I decided on Light smoke of. (Since Dark smoke had advice of Shop manager who says that there may be no duplication at vehicle inspection. )
Size comparison with NORMAL (Measured) In total length is NORMAL ratio -15 ?, height is +65?. "Air flow" Not only is it pretty voluminous. In product image of Net We Big Net "Dark smoke" It was a solid color of the real thing, as you can see "TwoTone" And yet "GSX" With logo, this was a pleasant miscalculation ~ ♪ After Custom, my car feels more tightened Ne ~ ♪ ♪ - Self-praise sorry!) By the way, the price is slightly higher sense - -
View detail
Because transparent screen is something different ...
The color is Dark smoke use
I think that it is a good touch to match with the car body color.
Installation was possible without problems.
How about windproof performance when driving ...
I do not understand the difference much w
View detail