Reviews
Fits: SUZUKI SKY WAVE 400 Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400, SUZUKI SKY WAVE 250SS (SKYWAVE), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250, SUZUKI SKY WAVE 250, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, KAWASAKI EPSILON 250 (Epsilon), KAWASAKI EPSILON 250 (Epsilon), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA MAXAM (MAXAM)
O-ring not fit
I bought it twice and both times the O-ring did not fit at all.
Maybe it depends on the lot, but I will not be buying any more.
View detail
Fits: SUZUKI SKY WAVE 400 Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400, SUZUKI SKY WAVE 250SS (SKYWAVE), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250, SUZUKI SKY WAVE 250, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, KAWASAKI EPSILON 250 (Epsilon), KAWASAKI EPSILON 250 (Epsilon), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA MAXAM (MAXAM)
O-ring Size does not fit
VANVAN200
However, the size of the O-ring does not match, even though it is included in the applicable car models.
I need to order OEM to use it.
View detail
Yellow-colored areas fall off considerably.
I had no problem with the fit since it is the same size as the manufacturerOEM, but the yellow-colored part on the back of the sponge is falling off. But the yellow-colored part on the back of the sponge is falling off.
I have a feeling that if Carburetor sucks this in, it will clog up, so I will not use it and buy OEM.
View detail
No matter how you look at it, they don't match.
I have not used or anything …since I have Installed the Upgrade Kit for YSS.
I also bought a snap ring to replace it, but the inner diameter was not correct to begin with.
View detail
It doesn't work well.
Since I changed to this pad, the Rear does not work well and I can't get to the point where I can activate the abs.
On long descents, it sometimes didn't work at all.
View detail
Fits: SUZUKI AN125, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100, SUZUKI BANDIT400, SUZUKI VOLTY, SUZUKI VECSTAR150
Small
I see that Φ5 is the outer circumference. I mistakenly ordered it as the inner circumference.
I wish you had mentioned it.
View detail
Fits: HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
It's not very useful.
I used it on a CRM250AR and the oil seal is too gubby and the Dust Seal is too tight to fit. It is a waste of money to buy something so cheap. View detail
Fits: HONDA BENLY 50S (BENLY50), HONDA BENLY CD50 (BENLY50), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA GORILLA (GORILLA), HONDA Little Cub, HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA Little Cub 55th Anniversary Special/Little Cub Special (LITTLE CUB 55th Anniversary/LITTLE CUBSPECIAL Knife), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey Limited (MONKEYLIMITED)
Came up as compliant but could not be installed.
It was found to be compliant here, but it was impossible.
I tried to attach the Nut on this Mirror to the current Mirror, but it didn't work, so I guess the so-called Pitch is different. It failed. Sorry, I am sorry.
SUPER CUB 90DX HA02.
View detail
Fits: SUZUKI SKY WAVE 400 Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400, SUZUKI SKY WAVE 250SS (SKYWAVE), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250, SUZUKI SKY WAVE 250, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, KAWASAKI EPSILON 250 (Epsilon), KAWASAKI EPSILON 250 (Epsilon), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA MAXAM (MAXAM)
Oil Element for DF200 DJEBEL
I am satisfied with the product performance and price.
O-ring in the goods is Quantity:2pc. Set is included in the
Attach to the larger ElementCap
O-ring size is Large
It is a little difficult to install.
View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI Address V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50
Before we talk about satisfaction.
The one I received was the wrong model number.
I bought the correct one at another Site.
View detail
Fits: HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX
Processed
The Black frame was too thick to close the Air Cleaner Box.
The Air Cleaner Box was shaved down to a thinness that would allow it to close.
Next time I will buy OEM Parts.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI Zr-7S, KAWASAKI Zr-7., KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI FX400R, KAWASAKI GPZ1100 ABS, KAWASAKI GPZ400R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX1200S For Malaysia Market
The image is confusing.
I thought it was BlinkerAss’y, but it was Shock with LensSingle Body. View detail
Size is different
I bought it because it was supposed to fit the RZ250, but the Size
(Outer diameter) was different. It seems that attention should be paid.
View detail
Fits: HONDA LITTLE CUB SP (Little Cub), HONDA SUPER CUB 100 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 70 (Super Cub), HONDA SUPER CUB 90 (Super Cub)
all three times
I have tried it on three vehicles and it leaks on all of them. It is completely useless. The only thing that helped was getting the OEM number. It was an expensive document. View detail
Fits: KAWASAKI CASUAL SPORTS (Casual sports), KAWASAKI ELIMINATOR 250 (Eliminator), KAWASAKI Eliminator 250LX (Eliminator), KAWASAKI ELIMINATOR 250SE, KAWASAKI EN400, KAWASAKI EN400TWIN, KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI GPZ250R, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN 1500 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 1500 CLASSIC TOURER (VULCAN400Classic tourer), KAWASAKI Vulcan 400 (VULCAN400), KAWASAKI Vulcan 400 (VULCAN400), KAWASAKI VULCAN 800 (VULCAN400)
vn1500c VULCAN400 Pad hole is not usable Small!
The hole for the pad is too small for installation.
Garbage
View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
very poor quality
In the beginning, I bought a pair of shock-absorbing oil packages with the good quality of the Japanese brand, and the oil leaked again less than a month ago! The quality is very unsatisfactory, and the customer service feedback manufacturer actually said that it is rust, what color is the rust, what color is the oil, can I not distinguish? -------------------------------------------------- -------- At the beginning, I bought a pair of shock absorption oils with a good quality of the Japanese brand in less than a month and leaked oil! The quality is very unsatisfactory, and the customer service feedback manufacturer actually says it is rust. What color of the rusty oil is it? Powered by Google Translator View detail
Fits: HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR)
It doesn't fit and deta Lame
The footpegRubber they sent me doesn't match the Bolt position and the fit is a lie.
The return policy is the worst I've ever seen.
Don't write that it fits when it doesn't!
You lying bastard!
Get on with the return process!
View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
It did not fit the Grom JC92.
For Grom JC92 (As a substitute for 51490-KRM-852) I bought this product in the US, but no matter how hard I pulled on it, the oil seal would not go in. The description is false, so please fix it. I want to return it, but... View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Not adapted to ja44
The mirror side Opposite Thread Screw fits, but the body side Normal Thread Screw diameter is different. I'll buy OEM parts now. View detail
Fits: HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR)
This is not working.
I bought the Cable for my 2010 Super Boldor to replace the Clutch. The difference of the bend angle of the hand side was concerned from the time of installation, but I exchanged it with the thing of the tolerance range. When I replaced it, the Cable holder attached to the Top Bridge was also very bad, and the Adjuster of the Cable was under pressure so that I could not turn it by hand.
I think it is the fault of this Cable because when I went out touring once, I got an objection that the clutch was heavy and the sharpness was bad.
Maybe the poor movement caused problems with the return as well as the pull.
After removing it, it is Garbage box going because the film of the part that hits Holder was torn and the movement of Cable also became reluctant.
View detail