Reviews
Replacement after purchase of used car
I bought a used car and when I opened the air cleaner it was pretty dirty, so I replaced it. After replacing it, the air cleaner started to make a popping sound when the engine was turned on, so I think it is coarser than OEM or the amount of oil applied to the filter is too little. It is a cheap Replace product, so it is very helpful. I think it is OK to speed up the replacement cycle because of the low price. View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
Used for CHAPPY
[How is it used?
YamahaCHAPPY (CHAPPY) Used for
OEM has discontinued the product and Vesra is available as a compatible product, but it was somewhat expensive, so we were looking for something NTB could use and found this product.
I was worried because there was no OEM Product No. for this product in the compatibility information, but there was an impression that it could be used with BOBBY, so I bought it thinking it would work. As a result, I was able to use it without any problem.
How was your experience with it?
No special tools are required for replacement, as it is simply hooked up and installed.
The positioning notches and Size feel were also similar to the OEM shape.
The car has not been driven in earnest yet, but after installing it and pushing and pulling it, it seems to be working perfectly fine.
Spring also came with a new one, so it was nice to be able to renew it.
How did it compare to other products?
As you can see in the photo, it was originally an OEM Product. (296-25331-00) was attached, but it was in RustRust condition due to a long period of neglect.
It was clearly better than that, so I am satisfied.
[Points to note]
Not particularly
【Review】
We were able to get a new Brake Shoe at a lower price than expected.
Life has not been tested, but for the price, I would be satisfied even if the amount of life is reduced a little bit.
View detail
Product # FDH-21
I'm planning on doing a lot of fork maintenance on my Honda Monkey. Little by little I collect consumables. I decided to try the anthers from NTB, since a year ago I replaced the anthers with original ones from Honda and they were cracked, I hope this will not happen here. In general, the quality of the products from this manufacturer is quite satisfactory, there are no comments. View detail
Fits: HONDA HORNET (600) (HORNET), HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET-S (600) (HORNET)
Honda hornet 250
Used for HONDA HORNET 250. I have driven about 500 km since the replacement without any problems.its Almost the same shape as the OEM Product, so there is no concern about using it.I think NTB air filter good product ..its best thing of my bike. View detail
Used for Side bagBracket
Used to make my own side bag mounting bracket.
It is thick and solid in terms of strength.
View detail
For M6, which seems to be available but is not so easy to find, and Flange thin type
Material:Well nut that is a Rubber product and should be replaced regularly.
It is often used for fixing Cowl screens, etc., but in recent vehicles, it seems to be widely used for various brackets and auxiliary equipment mounts.
Large holes can be absorbed by the rubber part, and there is no need to embed the nut in the fixed object.
In DUCATI, it began to be used extensively after 1990, and in the 1991 900SS, it is used in various places on various parts of the body.
It must have been so easy, because Cowl mount was well nut in all places!
The large cowl (and the Seat Cowl in the 900SL) is supported by a bolt called M6, which is a thicker bolt, but the receiving side of the frame is all well nuts.
Of course, M6 well nuts are sometimes used on domestic cars, but the overwhelming majority are M5 and M4 size, so there are not many types of M6 well nuts to choose from when looking for a universal product as a repair item for motorcycles.
In such a situation, this product is Exactly as UniversalWell nut of M6.
There are several types of wall thickness in the Flange section, and this is the thinnest type in NTB.
It is best suited for locations where the design does not consider fixing the object with a deformation of the Rubber of Flange, but simply uses it as an embedded Nut.
View detail
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets G (LETS G), SUZUKI Lets(LETS)
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
Necessary when replacing Oil
I replaced the oil in PCX JF81, so I also replaced the Drain Washer.
Once used, it is deformed and is replaced when Oil is replaced.
Most Motorcycle shops (except HondaDREAM) say they can be used a couple of times, but I replace them every time just to be safe.
After replacement, I checked for leaks, and after running the car I checked it again and found no leaks, so it is the same product as the OEM.
It is easier to pop in at home than to go to the store and order.
Will order again as soon as stock runs out.
View detail
Fits: KAWASAKI ELIMINATOR 250 (Eliminator), KAWASAKI ELIMINATOR 250SE, KAWASAKI Eliminator 250LX (Eliminator), KAWASAKI EN400TWIN, KAWASAKI GPX250R, KAWASAKI GPX250R-II, KAWASAKI GPZ400S, KAWASAKI Vulcan 400 (VULCAN400), KAWASAKI Vulcan 400 (VULCAN400), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
SEA BASSGSX400 X Tokyo Tower's Front forkOverhoe
I purchased this for a Front forkOverhaul for my SEA BASSGSX400 X.
Since the OEM parts were already discontinued and could not be purchased, I made a detailed inquiry to NTB and told them the size of the OEM parts.
I really wanted to replace the metal parts, but it was impossible because they were all discontinued, so I pushed the Motorcycle shop to reuse all the parts except for the packing to prevent scratches.
The overhaul was successfully completed and the front fork was revived.
In order to continue riding in NORMAL, we need to find the same Size for METALs.
NTB gave us detailed answers and we felt that NTB is a reliable manufacturer.
View detail
SEA BASSGSX400 X Tokyo Tower's Front forkO/H
I purchased this for a Front forkOverhaul for my SEA BASSGSX400 X.
I contacted NTB directly and told them the OEM size, and they politely told me the model number that could be applied to SealPacking and Dust cover, so I purchased them here and did the overhaul.
I really wanted to replace the metal parts, but it was impossible because they were all discontinued, so I pushed the Motorcycle shop to reuse all the parts except for the packing to prevent scratches.
The overhaul was successfully completed with the replacement of seals and oil, and the front fork was restored.
In order to continue riding in NORMAL, we need to find the same Size for METALs.
I did not give the size of the dust cover, but NTB gave me a detailed answer based on the information on the car body, which made me think that NTB is a reliable manufacturer.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI 1400GTR ABS, KAWASAKI 1400GTR ABS, KAWASAKI Ninja H2 CARBON (NINJA), KAWASAKI Ninja H2 SX (NINJA), KAWASAKI Ninja H2 SX (NINJA), KAWASAKI Ninja H2 SX SE (NINJA), KAWASAKI Ninja H2 SX SE (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-14R, KAWASAKI VERSYS 1000 (VERSYS), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZRX1100
Can be used in the same way as OEM Parts
It is fully compatible with OEM parts and can be used without any problems. View detail
Fits: HONDA Live Dio (LIVE DIO), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LEAD90 (LEAD), HONDA LEAD90 (LEAD), HONDA LEAD90 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA just (JUST), HONDA Julio (JULIO), HONDA Julio (JULIO), HONDA GYRO X (GYRO Postal Service), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X)
CANOPY Brake switch replacement
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The replacement work was based on a You Tube video.
View detail
Fits: KAWASAKI Ninja 250SL, KAWASAKI Z250, KAWASAKI Z250SL
The quality is as good as OEM Product, but cheaper!
I bought it because it is made by NTB with the same standard as OEM Parts, low price and safety! I have actually used it and there is no problem at all!
It's cheap, easy to get, and the quality is fine… I'll recommend it to everyone!
View detail
Fits: SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI Lets (LETS), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIDX (LETS TwoDELUXE), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE)
High-quality variator rollers of reduced weight
About quality and texture The rollers are of the highest quality, their wear resistance has been tested for a long time, the bushing never falls out of the plastic roller, reliable fastening inside, precise weight for each roller, maximum deviation of 0.05 grams, and it doesn’t matter whether the rollers are 18 grams or 8, precision very high About the feeling of use The mileage on this product was more than 10,000 kilometers, a quiet ride, but sometimes there is a lot of rapid acceleration and deceleration, I think that they will survive even more with completely quiet use, I think this is good wear resistance at such a low price Products to buy together No additional purchases are required if you only need to replace the variator rollers Difficulty of installation Easy installation to replace old rollers, no special tools required Cost performance and comparison with other products Low price, even if there are 3 pieces in one package, which means 2 packages are required, but the quality of this product is comparable only to the original About shipping and packaging Simple blister packaging, can be seen in the photo, no damage was found during delivery Any concerns, cautions, or advice when purchasing Please note that only one package contains 3 rollers, 6 pieces required, which means 2 packs I used this 15 gram roller weight for a better start on the Suzuki Address 110, this product fully met expectations, weight accuracy, good wear resistance View detail
Necessities
DrainWasher of essential items when changing oil.Quantity:1 Set of 10pcs. so each replacement costs about 73 yen. We avoid using this all the time.:Since it is aluminum, it feels good to crush it when tightened with Wrench. View detail
Fits: KAWASAKI KL250, KAWASAKI KL250R, KAWASAKI KL250R, KAWASAKI KX125, KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Z2
Overhaul.
This Manufacturer is Repeater, I've used it on other cars, but it is Large sturdy! View detail
Fits: SUZUKI GN125E, SUZUKI GN125E, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Bridie Post (BIRDIE), SUZUKI Birdie 90 (BIRDIE), SUZUKI Birdie 90 (BIRDIE), SUZUKI Birdie 90 (BIRDIE), SUZUKI Birdie 50 (BIRDIE), SUZUKI Birdie 90 (BIRDIE), SUZUKI Birdie 50 (BIRDIE)
Price suitable
He's a Brake that honestly doesn't work.
I think Life is longer for that.
It's just a prediction.
View detail
This,,,
This seems to fit Magic 1...
I have Magic 2...
So I sold Magic haha.
All that's left is this...
This seems to fit Magic 1...
I have Magic 2...
So I sold Magic haha.
This is all that's left... I keep making nonsense... haha ------------------------------------ ---------------------- This seems to fit Magic 1 ... I have Magic 2 ... So I sold magic hahaha This is the only one left. .. This seems to fit Magic 1 ... I have Magic 2 ... So I sold magic hahaha This is the only one left ... Powered by Google Translator
View detail
Seat reupholstering of moped
The texture is almost the same as OEM. The reupholstery process was also not confusing because of the instructional video.
It's been about half a month and no sagging. 。 It is a very comfortable seat.
View detail
High quality.
The OEM Seat skin tore and I purchased this product.
The skin is a little thicker than the OEM Seat skin, but it is flexible and even a beginner could easily reupholster it.
Seat grips when driving are also fine.
I am also satisfied with the OEM look of the Large.
View detail