Reviews
I lost it, so...
The push rivet that stops the side cowl of YZF-R1 was lost, so I bought it.
SizeExactly.
I looked at the Touring and a little bit of the Circuit and had no problems at all.
View detail
Fits: HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100 BLACK STYLE, HONDA CB1100 BLACK STYLE (ABS), HONDA CB1100 E Package, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX <ABS> (Special Spec.), HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 <ABS>., HONDA CB1100 <Infinite Edition>., HONDA CB1100 <Type I>.
If the foot slips out of the footpeg, it should be replaced.
[How is it used?
The mileage is now about 63,000 km,
Because my feet have recently started slipping off the footpeg.
How was your experience with it?
It will be a replacement from OEM Product,
There is no particular inferiority of texture, and it is no longer slippery.
How did it compare to other products?
This is a comparison with OEMs, but I don't think it is the same.
It should not be too tricky, but it is not a problem.
[Points to note]
One SideBolt just fixed with two SideBolts,
Both Bolt and Bracket can be reused.
It is a common part even for OEMs, so as long as you don't get the part number wrong,
Fits without problems.
NTB products are purchased at ESTRELLA's Air Filter,
I had a good impression, so I searched for Rubber Footpeg this time,
There was a CB750 Rubber Footpeg.
I am looking forward to seeing more in the future as there seems to be a lot more to do.
View detail
Fits: YAMAHA XT250X, YAMAHA XT250X, YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR)
During Overhaul
Cost performance is better than OEM. View detail
Fits: HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN)
OEM Product suitability
I ordered NTB's Meter cable because I thought the cable was broken and the needle on the meter was not moving. I connected the Meter cable but of course the Meter needle did not move, so I had to look for a Meter gear. View detail
Fits: HONDA CRF250L, HONDA CRF250L, HONDA CRF250 RALLY Type LD <ABS, HONDA CRF250 RALLY Type LD <ABS, HONDA REBEL250, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CBR250R <ABS>., HONDA CBR250R, HONDA CB250R, HONDA CB250F <ABS>., HONDA CB250F, HONDA REBEL250, HONDA CRF250M, HONDA Rebel300
REBEL250
I am satisfied with the quality of the product, which was comparable to the OEM. View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Fits: HONDA FUSION SE, HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA XR BAJA (BAJA), HONDA XR BAJA (BAJA), HONDA SL230, HONDA SL230, HONDA SL230, HONDA PS250
It was able to be used without problems
I used it on my FTR223 and had no problem with the size feel. View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio EX (JOG APRIO), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG EX (JOG), YAMAHA JOG next zone (JOGNEXT ZONE), YAMAHA JOG Poche (JOG POCHE)
It is necessary and sufficient
Installed on 4JPAPRIO.
It was an APRIO that was given to me and originally had a Chinese Shock that I didn't understand, which was rusty, hard, and uncomfortable to ride on, so I bought it for the purpose of improving the ride quality.
I don't know the status of the OEM, so I can't make a comparison.
The spring rate is variable, so it is softer in the beginning and becomes stiffer as it shrinks, improving ride quality.
Product image is Quantity:The picture shows 2 pcs, but what you will receive is 1 pc.
View detail
NTBBrake Pads
Purchased as Brake Pads for use with TOKICO 2-pot Caliper
This Caliper is used in Kawasaki's KX85 and SUPER SHERPA, find and buy a Pad for SUPER SHERPA!
This Caliper can be attached to SUZUKI's ADDRESS V100, and the actual vehicle used is the ADDRESS V100.
The price is low, but it worked fine.
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
Can't tell the difference between OEM and
I used it to replace the RearShoe on my commuting Motorcycle SUPER CUBja10.
The OEMs that had 21,000 km of use had used the TouchCUBs so close to the limit that the Touch was poor and the effectiveness of the Touch was very weak, but after replacing them with these Shoes, the effectiveness and Touch of the new car was restored.
View detail
Fits: HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
Quality as good as OEMParts
The Mirror of Crf250RLY50 is OffMotorcycle, but the Mirror that looks like a big road motorcycle is Standard Equipment.
We chose this one, which has the same shape as the XR250OEMMirror.
The appearance, texture, performance, and quality are the same as OEM Mirror.
liked it
View detail
Fits: YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio typeII (JOG APRIO), YAMAHA JOG EX (JOG), YAMAHA JOG next zone (JOGNEXT ZONE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG Z (JOG)
Replaced with a new one
This Manufacturer is a Repeater, it is cheap and can be installed without any problems, just like OEM Parts! View detail
Fits: YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio (JOG APRIO), YAMAHA JOG aprio EX (JOG APRIO), YAMAHA JOG aprio typeII (JOG APRIO), YAMAHA JOG aprio typeII (JOG APRIO), YAMAHA JOG EX (JOG), YAMAHA JOG next zone (JOGNEXT ZONE)
Crack cracked and replaced
First of all, it is cheap! This is good enough, I was able to install it without any problems. Just my personal opinion. View detail
Uncoated and used
I wanted the high seat set up on the Z125, but it was about 30,000 on ebay!
I couldn't afford that kind of price for Seat in SL, so I made it myself.
Ancho is a 20mm thick Sponge sold in Jungle for about 600 yen, OriginalCover is removed and glued.
Shave it with a grater Gold to shape it and cover it with this product.
The SIDE of the original anchor was cut off to fit.
The surface of the Seat has a non-slip Tank Pad-like texture, and the Grip has been increased.
The OEM has a glued front edge corner so it fits better, but this product has a thicker fabric and sewn finish so the corner fit is a little worse, although it is not very visible once installed.
Also, the anchored area interfered a little with the Rear Sets and I had to push it in quite a bit to get it to lock.
I think the price is low enough for the front and back, but I only used the front, so it would have been even better if the price was lower for the front and back separately.
View detail
Fits: KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator)
kawasaki VN250A seat cover
First, I purchased this for lower price than genuine. More attractive than I thoght. Very good product. Surface of seat is especilly good. No slippery and shape and fir good seat frame. View detail
For Screen fixation
Material:Well nut that is a Rubber product and should be replaced regularly.
This time I purchased it for fixing Cowl's Screen.
The rubber is hardened to the point of pushing after 30 years, so it would have to be replaced anyway, but the previous owner had tightened it so much that the well nut was deformed and would not come back.
Since it is very common to use M4-size well nuts to fix the screen, there is no problem with these well nuts without having to purchase expensive OEM parts.
Some universal well nuts are too thick for screen fixation, but NTB's well nut is the thinnest type among universal well nuts.
It is truly OEM compatible.
Conversely, well nuts used for fixing brackets of auxiliary equipment would have a thicker flange, making them somewhat unsuitable.
Unfortunately, the Screw that I thought was M4 was actually M5, and this product was not available.
It's all my fault that I couldn't use it, so I don't blame myself.
Well, maybe you'll use it sometime! Maybe!
View detail
Fits: SUZUKI SKY WAVE 400 Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400 (SKYWAVE), SUZUKI SKY WAVE 400, SUZUKI SKY WAVE 250SS (SKYWAVE), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250B Limited version (SKYWAVELLIMITED bar John), SUZUKI SKY WAVE 250, SUZUKI SKY WAVE 250, SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 200 (DJEBEL), SUZUKI DJEBEL 125 (DJEBEL), SUZUKI DF200E, KAWASAKI EPSILON 250 (Epsilon), KAWASAKI EPSILON 250 (Epsilon), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA Maxam (MAXAM), YAMAHA MAXAM (MAXAM)
I am satisfied
There is nothing wrong with it compared to OEMs.
I will continue to use it.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI Zr-7S, YAMAHA XJR1300SP, YAMAHA FZ750, YAMAHA FJ1200, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R1100, KAWASAKI ZZR250, KAWASAKI Zr-7S, KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI Ninja 250R (NINJA), KAWASAKI KLE250 ANHELO, KAWASAKI GPZ900R For Malaysia Market
No particular complaints.
Goods that are consumable and sufficient without the need to buy expensive ones. View detail