Reviews
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY)
NTB Flasher relay for 2 wheels 6V
This is a smaller type than the OEM Product, but the performance is almost the same. I removed the battery case, put the bracket over it, and installed the relay when I installed the regulator, so it fits nicely inside the Left SideSide cover. View detail
I lost it, so...
The push rivet that stops the side cowl of YZF-R1 was lost, so I bought it.
SizeExactly.
I looked at the Touring and a little bit of the Circuit and had no problems at all.
View detail
The item received is the same as the one in the picture
This item was safely delivered. I was running a motorcycle recently and the undercover broke, so I should use it for repair. View detail
Exactly
I used this screw around the meter on my gsr. 1pc. rolled off and I lost it, so I used a different screw, but I ordered it from OEMParts. I knew that proper OEMParts is the best! The picture showed Silver and Black, but the Black one came. View detail
Depending on how many you have, you may be able to buy them at the homestead?
5mm×16mm tapping screw
Screws to fasten the lid of the air cleaner
If you know the length, maybe Homesense is cheaper?
This is for people who do maintenance and should have a spare.
View detail
Great Value and Quality Breather Hose Clamp for the Grom
About quality and texture: I am happy with the quality of the hose clamp from NTB, made from a spring steel with a nice silver trivalent chromate treatment surface finish. About the feeling of use: The Honda breather hose clamp is small and weak, the NTB hose clamp secures the hose much better and looks great with it's silver surface finish. Products to buy together: Some more hose clamps in varying in size would also be desirable to purchase along side the BC15.5 hose clamp. Difficulty of installation: The process to install takes just a minute, I find my fingers are usually not strong enough to install these hose clamps so tend to use combination plyers and add some electrical tape to the jaws so to not damage the surface coating. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a great quality product for a very low price as compared to the hose clamps available from SP Takegawa. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I find the NTB applicable range a little difficult to workout for the sizing I am wanting but if you look at the photos they attach with the vernier it makes this much easier. View detail
Good product, easy to use.
I used it to reupholster Seat. It is very convenient. I bought this machine because I couldn't find a machine at Home center that would work with Tucker's short legs. View detail
Maru available in 1pc. units.
I bought this one to replace the hose clip with a firmly stop plate Spring type. I had no hesitation in deciding on this one because the narrower the diameter, the more limited the choices.
The NTB clamp is easier to pick up because the ear part is a little longer than the spring type clamps that are also found in Manufacture OEMs. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
I bought this one to replace the hose clip with a firmly stop plate Spring type. I had no hesitation in deciding on this one because the narrower the diameter, the more limited the choices.
The NTB clamp is easier to pick up because the ear part is a little longer than the spring type clamps that are also found in Manufacture OEMs. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
[How is it used? As hose clip around carburetor
Was the one you received as per Image? Yes
Was the installation difficult? Nothing particularly difficult.
How was your experience with it? Moderately firm and safe to use.
[Included Parts:were they on? No
[Was there anything that disappointed you? As expected
I bought this clamp because I wanted to replace the hose clip with a spring-type clamp that stops only when the clamp is in place. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
I bought this clamp because I wanted to replace the hose clip with a spring-type clamp that stops only when the clamp is in place. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units. View detail
Wrong size
The clamp that holds the hose on the rear brake reservoir tank was rusted out, so I bought this to replace it, but I actually needed a larger one.
I had no choice but to replace the fuel filter clamp attached to the fuel hose, which was also damaged. The product itself is the same as the hose clamp sold at the gardening supply corner in the home center for about 1pc. 80 yen, but since I got it cheaper than that, I decided to call it good. It's very easy to use, just pinch it with radio pliers and spread it out while attaching it to the hose.
I bought the hose clamp for the reserver tank at Home center and installed it to the right size.
View detail
Hose clamp。
It's easy to grab and use. View detail
As a spare part!
I used it on my GSX-R1000R at the Chain Cover!
I think Rivet is one to have in reserve!
View detail
The price is per piece. The size is accurate. View detail
It's a standard product.
It is very normal to use.
You can get them at the Home center, but it is better to order them while you are buying something else.
View detail
Luxury than OEM
Maybe because the OEM is made in Thailand, the white rust floats off after about a year or so and it's very dirty.
This product has a solid plating and glossy surface with a high quality feel.
I am very grateful for this product because it is not possible to use the thin tip of Tapping or KITACO's Anodized products sold at home center.
View detail
No problem
I was too lazy to go to Homesen, so I'm here ….
It's not a thing to imply, but … it's usually usable.
It's a little stiff.
It's not a great costumer, but considering the hassle of going to buy it, … I guess.
View detail
Good to have in stock.
I bought the Meteretc. without any commitment to it.
I'm a little disappointed that it's not in stock.
It's even better if these Parts are in stock and available for immediate delivery.
View detail
I bought them in bulk for loss.
The HarnessBracket of the back of the meter was fixed to the resin parts of MeterCase with this Tapping screw. Because the screw which originally had been attached was dirty with Rust, I purchased and replaced it while cleaning Meter. Since it is difficult to understand the screw diameter, please be careful with the Tapping screw. View detail