Reviews
High Quality Hose
This NTB hose is very high quality. It comes in a sealed package and is cut perfectly. I have used this hose as a tank breather for a GSXR 1000 R after EVAP removal. The hose fits perfectly to the tank breather fitting as can be seen in the picture. You get 1 metre which is more than enough for this type of application The price is also very good, especially for the quality. I will be buying this hose again Recommended View detail
cheapness is the name of the game
I think it is possible to find OEM parts, but the Breather Hose 650mm 6mm Diameter from the rear of the crankcase of CUB series engines was out of stock, so I substituted it with this one of the same size.
I don't want to be speculative, but this Hose in a different Size was falling apart after a year, so it might be better to buy it if you want it for now with the intention of replacing it frequently.
View detail
MONKEYCarburetor/Drain hose
[How is it used? Overhaul of MONKEYCarburetor, repair of oil leak, replacement of hardened and cracked tube due to deterioration.
Was the one you received as per Image?
It is soft, durable and looks much the same as OEM.
Was the installation difficult?
Just cut them to length.
How was your experience with it?
It was soft, easy to use, and easy to install.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
As expected.
Point of installation and hang/.
Each hose of MONKEYCarburetor has a different size. the part of Drain that drains oil has a size of 3.5×7.5.
View detail
Hose connecting MONKEYCarburetor and Tank
I thought the cause of the oil leak was packing, but the hose connecting the tank to the carburetor also had a little tear due to deterioration. I was not able to find an OEM hose, so I purchased this product.
The Sizes of other Hose in Carburetor are different from each other in size at each location.
Hose connecting Tank and Carburetor was this product (4.5×8.5).
The quality is good, durable, soft and problem-free.
View detail
cost effectiveness
Used for Restore vehicles.
I think it would be good to have a place called OEM Product sameetc.
Cost-effective.
NTB in Cospa.
That's what I'm talking about
View detail
I'd like to see more detailed Specifications.
Used for Repair of Fuel Hose of LIVE DIO.
Description. Its double-layer construction makes it highly resistant to oil." I would like to see other specifications written in detail, since it is a Fuel Hose, so it is natural that it has excellent oil resistance.
The DAYTONA's hose says "Inside:00, outside:△ △ △, heat resistant temperature:? The temperature resistance is 0.5 to 1 degree Celsius.
I'm not saying that NTB's stuff is bad, but it would be easier for buyers to choose if you wrote down the details.
I chose NTB because they had a good size, price, and reliability.
Maybe this will be Large sturdy until I let it go.
View detail
Fuel hose
NSR50's fuel hose had deteriorated and was replaced.
I measured the size of the old Hose before I bought it.
View detail
Elasticity.
[How is it used?
TZr250R (3XV) I bought this to add a Filter to the Fuel line of
I couldn't bear to Cut the OEM Line, so I used this product.
Was the one you received as per Image?
When I touched the product I received, I was surprised by its elasticity.
The OEM Fuel line is quite hard, but I wonder if it was originally this elastic...
It looks like OEM at a glance, so it doesn't stand out as strange.
How was your experience with it?
I bought one with an inner diameter of 7mm.
The new rubber is very resilient and I was able to install the 8mm OD Filter without difficulty.
I bought this product because I didn't want to cut the OEM Hose, but I'm thinking of changing that to this product as well, since it's elastic and easy to put on and take off. LOL!
[Points to note]
The size notation is a bit confusing, but except for special sizes, if you choose one with a smaller inner diameter, you're basically in the right place.
Also, the Hose clip is not included, so you need to purchase it separately if you need it.
How did it compare to other products?
I also used a common Pink Hose elsewhere, but it became hard after less than a year.
I'm wondering how long this product will keep its elasticity.
【Review】
I don't know how long this elasticity will be maintained, but so far I am very happy with it.
The price for 1 meter is also good, as OEM Parts can cost around a thousand yen for a dozen or so centimeters.
View detail
Used for ZEPHYR
I used it on my ZEPHYR Fuel line.
I chose this one because OEM ProductSize is not sold to the general public, and I had to buy OEM Parts, which is not very cost effective.
I replaced the fuel fliter at the same time, and I have no problems driving.
View detail
OEM Product Quality
It's an OEM Product quality NTB, so it will be durable and Large durable. View detail
DF200 DJEBEL.
This time I used it for DF200 DJEBEL. fuel hose is also available from various manufacturers, but this manufacturer is very good and cheap. I recommend you to replace it as soon as possible. View detail
OEM same etc.
Please note that the inside/outside diameters are shown in different sizes.
This is Universal's fuel hose and it looks just like the OEM one. The usual translucent pink hose will break into pieces after 6 months of exposure to UV and Gasoline, but this one is fine.
The heat resistance was sufficient for my needs and it didn't melt. It is not colorful, but it is enough.
View detail
Unexpected uses
I used this hose to replace the fuel hose of my forestry truck. It became the Race Specification of the forest road. View detail
Unexpected uses
I used it for an unexpected non-motorcycle use. I bought it because my work truck at home is a carburetor and I need to replace the Fuel Hose because it has deteriorated. The rest of Hose is used for Motorcycle. View detail