Reviews
Ponting on Vmax1200
I always use them because they are cheaper than OEM and the quality is good.
However, only the NORMAL length is sold, so it may not be possible to install if an Up Handle etc. is attached.
View detail
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB)
throttle cable
Excellent throttle cable, inexpensive replacement for the old original cable. Everything went great.
I recommend to buy. -------------------------------------------------- -------- An excellent truss of gas, inexpensive replacement for the old original cable. Everything came perfect. I recommend the purchase. Powered by Google Translator
View detail
Fits: SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse)
Accelerator Wire is now working better!
The Accelerator Wire on my gsx400Impulse GK79A got stuck and stopped working, so I replaced it myself. Even such a simple repair would have cost a lot of money if I had asked a store to do it. It was quite a difficult job to do by myself, but I was able to get it back at a reasonable price. The store was quick to ship and I was able to replace it right away. View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 Motard, HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD)
OEM Product is discontinued….
[How is it used?
I purchased this product because the original installation had fluffed up.
OEM Product was discontinued.
I bought it with Pull Side.
Was the one you received as per Image?
No difference from OEM Product.
Nut position is also the same.
How was your experience with it?
It is the same as OEM Product, so there was no problem.
[Points to note]
It is safe to say that there is nothing in particular.
Pull Side and Quantity:You can buy it at Set.
How did it compare to other products?
Not much else was available, so that was helpful.
View detail
Fits: HONDA XR250, HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250 Motard (MOTARD), HONDA XR250
Same as OEM Product
[How is it used?
I purchased this product because the original installation had fluffed up.
OEM Product was discontinued.
Was the one you received as per Image?
No difference from OEM Product.
How was your experience with it?
It is the same as OEM Product, so there was no problem.
[Points to note]
It is safe to say that there is nothing in particular.
How did it compare to other products?
Not much else was available, so that was helpful.
View detail
Nearly OEM Equivalent Product
This is an impression of using it on a C-type ZZr1100. It seems to be usable without any problem since it is common with D type.
We bought a ZZr that had been laid up for a long time, and when we raised it up, we checked every part of it and found that the Throttle Cable was also not working properly, so we replaced it. The texture and dimensions are almost the same as the OEM cable, so I was able to install it on the vehicle without any concerns.
I have used NTB's OEM Equivalent Product on other motorcycles I own and am satisfied with its quality, including durability, so I purchased it again this time and I still feel secure. I am satisfied with the quality of NTB OEM Equivalent Product including the durability.
I really appreciate the fact that Repair Parts can be purchased new even though it is an old Motorcycle. I am planning to repeat this service again in the near future.
View detail
Accelerator Wire on cb750 with …
To replace the carburetor, we had to remove the carburetor box and shift the carburetor slightly, which would have been much easier;
I think it's the strongest in terms of quality and costa…
View detail
No Color inferior to OEM Product!
I changed the Throttle Wire while I removed the Tank to check the Plug without the Engine.
NTB's products are as good as the OEM products, so you can use them without worry. The durability is the same as the OEM products. This time it is the throttle wire, so I replaced two wires at the same time. It took me less than an hour to complete the job.
The cause that the essential Engine did not start was the contact defect of Ignition.
View detail
OEM equivalent
This time I bought it to remove the Reverse Side and make one pull on the Pull Side only
It should be noted that it is only the Pull Side of the Throttle Wire Side is not included Maybe there is no configuration, so you need to prepare an OEM Product
There was no problem with the installation The construction was beautiful and I was satisfied with the purchase of the Large
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
If it's old, it's worth replacing
This is a replacement from the original, and probably new car-installed product that came with it
The Wire movement itself didn't feel bad, but the RubberBoots are starting to crack Therefore, I decided to replace it
The wire that I removed is much more bent than the new one, and there is no wire fraying And it wasn't in good shape
But even after replacing it, the weight of the Throttle remains almost the same However, the Idling rpm went down and became stable After all, there was a snag
I'm glad I replaced it
View detail
The same as the OEM Product, so you can rest assured
It's been 2 years since the replacement and there are no problems
I think this is a quality product that is safe to use
OEM Products are no longer available
Thank you, NTB
(I also use Clutch Cable and Brake Pads from NTB.)
View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR)
Exactly!!
I installed it in DRAGSTAR 250 VG 02 J.
Does Slot get lighter?
I bought a bar TEC 's Throttle wire in the Amazon, but the Screw on the return side wire is too big to enter and the pull side is thin and scarce ...
NTB products, products were more than expected.
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
It is Repeat..
I bought it before, so this time it is also Repeat. It can not be distinguished from OEM and performance is no problem. There is also a sense of profit because the price is also cheap. It is recommended.. This time I am Accelerator Wire but I would like to also use Brake Washer. View detail
Fits: HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN)
Great replacement for OEM part - extremely fast shipping to Australia. In Australia this part cannot be obtained new. When installing remember to lube the cable for extra life.
Great replacement for OEM part - extremely fast shipping to Australia. In Australia this part cannot be obtained new. When installing remember to lube the cable for extra life. View detail
Fits: YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX600
it is perfect
There is no problem at all and it can be used.
Installation was possible without problem!
There is no problem with COSPA, fabrication also does not take over on OEM!
There is also a long cable, but in this case, when deciding to Pipe Handlebar from Separate, I decided to buy that!
View detail
Fits: HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB)
Cospa is good.
I thought that the wire became useless as the return of Throttle of LITTLE CUB got worse, I made an OEM Product estimate but NTB was cheaper so purchase here. Because uneasy people are hundreds of yen difference, I recommend OEM Product. I can use it without any problems. It was somewhat troublesome to have to open the Leg shield and Handlebar Cover to get to the Throttle Wire of LITTLE CUB.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
The Axel Wire by no means went out at the Bon Festival, and while getting impatient for the original manufacturer's product order very much only at stores called tray dawn, it found this product by webike and arrived immediately on purchase and the next d
The Axel Wire by no means went out at the Bon Festival, and while getting impatient for the original manufacturer's product order very much only at stores called tray dawn, it found this product by webike and arrived immediately on purchase and the next day.When a carburetor was not removed, since exchange was not easy, the
HORNET was serious, but since it could correct safely and the Bon Festival Touring also went, it was found useful very much.The using feeling is not different from an original manufacturer's product, either.It is only how many durability have after
.
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
[Webike Monitor] Since the motion of the Throttle became astringent, Cables were exchanged. attachment was also equivalent to the original manufacturer's product, and satisfactory.
[Webike Monitor] Since the motion of the
Throttle became astringent, Cables were exchanged.
attachment was also equivalent to the original manufacturer's product, and satisfactory.
View detail
Fits: HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA)
Since the existing Cable is becoming tattering, it exchanges. With [ although four months have passed since use ] no problem. It was shopping which may be relatively cheaper than an original manufacturer's product also as for a price.
Since the existing Cable is becoming tattering, it exchanges. With [ although four months have passed since use ] no problem. It was shopping which may be relatively cheaper than an original manufacturer's product also as for a price. View detail