Reviews
Fits: KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI Z750, KAWASAKI Z750, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI ZR750S, KAWASAKI ZRX, KAWASAKI ZRX
Sufficient for use.
When replacing the rubber on the front footpeg, we only had one OEM product on hand, so we purchased the N, T, and B products for one side of the footpeg.
At a glance, there is no difference between the front and back of the product and the OEM Product.
The only difference? The only difference is that the OEM Product is glossy (anti-degradation? N,T,B are still in rubber, N,T,B have a die-cut mark and a mark on the back side. and there is an engraving on the reverse side.
Ninja 1000, but when placed side by side with the OEM, the product length is about 1mm shorter on the tip side.
Installation was completed without any problems, with Screw fastening to match the Base.
The conditions of use (straddling) are no different.
View detail
Fits: HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR)
It doesn't fit and deta Lame
The footpegRubber they sent me doesn't match the Bolt position and the fit is a lie.
The return policy is the worst I've ever seen.
Don't write that it fits when it doesn't!
You lying bastard!
Get on with the return process!
View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
Cospa best
I think it is a good product in cheap price, shape and Material. View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB110 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 MD (SUPER CUB Postal Service), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO)
OEM Product with the same etc. quality and cheap price!
The OEMfootpegRubber has deteriorated to the point where it's falling apart.
I made a purchase to replace it.
Rubber texture and dimension are the same etc. as OEM Product, but the price is a percentage
It's cheap and feels cosy.
For this price, you don't have to put up with any deterioration, you can get it right away.
I like the idea of replacing it with a new one. Always touch it while riding.
This is the part where you can ride comfortably.
You can install the parts cleaner in the hole where the footpeg goes.
I gave it a light spray and it just went in and Quantity.:Pair (for Left and Right) in addition
also took less than five minutes to work.
View detail
Fits: HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100 BLACK STYLE, HONDA CB1100 BLACK STYLE (ABS), HONDA CB1100 E Package, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX <ABS> (Special Spec.), HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 <ABS>., HONDA CB1100 <Infinite Edition>., HONDA CB1100 <Type I>.
The OEM has been deteriorating.
Purchased this product because Rubber is no longer uneven. View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
Get it as a spare
Get it as a spare
I haven't put it on yet, so I'm not sure how comfortable it is.
I'm sure it'll work.
View detail
Fits: HONDA Ape (50) (APE), HONDA Ape (50) Type D (APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape(100) (APE), HONDA Ape(100) (APE), HONDA Ape(100) Type D (APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50)
Very satisfied
Used for Honda PALADIN.
I don't know if OEM is still available, but I bought this one because of the low price.
It's a perfect fit. (A little tight)
I'm happy with how it looks.
View detail
Fits: SUZUKI Bandit1200, SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI GSF1200, SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI TEMPTER (TEMPTER), SUZUKI RF400, SUZUKI RF400, SUZUKI KATANA (KATANA), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse)
caution
GV79A. You can use both front and rear. But the OEM FootrestRubber is actually a different shape for front and rear. If you want to use it on the front, you have to remove the steel plate inside. If you don't mind that, you can use it in front. After that, the shape fits perfectly. Well, OEM is too expensive, so I'm thankful for these products. View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500S, YAMAHA SRX250, YAMAHA SRX250F, YAMAHA SRX400
To YamahaRENAISSA
YamahaRENAISSA's Change rubber was worn out, so I replaced it with this one, but I think it wears out a little faster. I'm not sure if it's worth it or not. I think the product is not bad. I think the product is not bad, but if it is the same thing, OEM might be better. View detail
Fits: KAWASAKI BJ250C, KAWASAKI BJ250D, KAWASAKI BJ250F, KAWASAKI BJ250G, KAWASAKI BJ250J, KAWASAKI BJ250K, KAWASAKI W400, KAWASAKI W650, KAWASAKI ZR1000B, KAWASAKI ZR1200A, KAWASAKI ZR400G, KAWASAKI ZR750L, KAWASAKI ZRX
Diverted to BEETSuper bank
The size and design of this pedal is almost same as NTB's RCK-01, so it is for Kawasaki's OEM change pedal. The size and design is almost same as NTB RCK-01. The soft and slippery feeling of Rubber was revived. Of course, it can be used for BEETChange Pedal as well. It cost me 850yen for shipping from BEETJapan, so it was very helpful. View detail
Fits: SUZUKI Bandit1200, SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI GSF1200, SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI TEMPTER (TEMPTER), SUZUKI RF400, SUZUKI RF400, SUZUKI KATANA (KATANA), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse)
To PetitRestore.
It makes you feel refreshed. If you renew even a small part, you will feel more attached to it. View detail
Fits: SUZUKI Bandit1200, SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI Bandit400 (BANDIT), SUZUKI GSF1200, SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI TEMPTER (TEMPTER), SUZUKI RF400, SUZUKI RF400, SUZUKI KATANA (KATANA), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse)
Just by replacing it, you'll feel like you've Refreshed the whole thing.
The costa is good. It is not slippery and has a good feel to the foot. View detail
Fits: HONDA Ape (50) (APE), HONDA Ape (50) Type D (APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape(100) (APE), HONDA Ape(100) (APE), HONDA Ape(100) Type D (APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50)
Honda soft footpegs
I bought it on a Honda Ape. The old footpegs were and wobbly. These footpegs are no different from the original Honda ones, but they are cheaper, which is why I bought them on my Honda Are. I think that it is better not to change the original style, it was possible to take the aluminum catacombs. But this is not the same. Daytona also offers aluminum. I bought it on a Honda APE. The old running boards were also ruffled. These footrests are no different from the original Honda, but they are cheaper, so I bought them for my Honda are. I think that the original style is better not to change, you could take the catacombs aluminum. But this is not the same. Daytona also offers aluminum. View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
No problem as an OEM replacement
I bought it because it was too much trouble to look up the OEM Parts part number. I have no problems with the texture or anything else. It is cheap and this is enough for me because it is a consumable product. View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500S, YAMAHA SRX250, YAMAHA SRX250F, YAMAHA SRX400
I bought it as a replacement for OEM Parts
As the rubber of FZr's Shift Pedal was out, I was going to paint it and bought it It is cheaper than OEM parts and has the same geometry and dimensions Because the stroke at shift is also back, it becomes easy to ride after replacing the shredded rubber I did Recently, I buy what I can buy from NTB's products here It's very helpful View detail
Fits: HONDA Ape (50) (APE), HONDA Ape (50) Type D (APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape(100) (APE), HONDA Ape(100) (APE), HONDA Ape(100) Type D (APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50)
Looks like good quality
Honda OEM Product and hesitated, but because it is a material that seems to be hard and slippery I shunned it I was looking for a similar footpeg, and I found NTBfootpeg, which seems to be of good quality, and bought it I saw it It looks and feels flexible and long-lasting to the touch View detail
Fits: HONDA Ape (50) (APE), HONDA Ape (50) Type D (APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape(100) (APE), HONDA Ape(100) (APE), HONDA Ape(100) Type D (APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50)
NTB HONDA Rubber Footpeg for Super Cub
I bought these rubber footpegs to replace the old worn ones. The old footpegs were badly worn out and no longer saved from high engine vibrations. Also, the old footpegs turned freely and fell off the metal bracket-holder. These NTB rubber footpegs are made of high quality soft rubber that fit perfectly with the original Honda Super Cub C50 mount. Webike again pleased us with very fast delivery to Moscow and excellent packaging! Thanks! View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB110 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 MD (SUPER CUB Postal Service), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO)
Beautiful
I installed it on MONKEY50
There was an Aluminum Footpeg and B/S on the exterior Up of MONKEY, but there was one Since I have a B/S on my GORILLA, I try to make the exterior NORMAL for MONKEY as much as possible The price is very good and the feeling of the CUB Normal step is very good I bought it because it's affordable
The installation feels much softer than NORMAL, with the Rubber feeling much softer than NORMAL, and with the foot on the You can run
When I went Touring, a guy on MONKEY told me that the footpegs are different When I told him that this is an OEM footpeg for CUB, he said it's good
Also, MONKEY has a shallow bank angle, so I'm a Footpeg (Iron Pipe part) I'm trying to put it to bed with about 7mm of cuttings, but maybe it's just a matter of mood
View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB110 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 MD (SUPER CUB Postal Service), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO)
1pc. is.
Number : 1 = 1pc. is.
Quantity : Pair (for Left and Right) In the case of exchange, Quantity : 2pc. Let's purchase Set.
There is a compatible model, SUPER CUB 110
We installed on HA02 CUB 90.
I put it normally, so I think the diameter of the steel bar of the footpeg is the same.
View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB110 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 MD (SUPER CUB Postal Service), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO)
Installation is a bit Large strange
I bought it because it is cheaper than OEM Product.
I had a hard time fixing the hole Smaller than the OEM Product.
While striking with Rubber hammer, while hitting it might be a hole
I worked.. Instead, it is harder to deviate than OEM Product.
View detail