Reviews
Fits: HONDA MONKEY125, HONDA LEAD125, HONDA ZOOMER-X (ZOOMER), HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XL230, HONDA Sh mode (MODE), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, HONDA PCX HYBRID(Hybrid), HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Good quality front fork dust seals!
These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail
Fits: HONDA FTR, HONDA FTR, HONDA CB900, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA CBR400R Limited Edition, HONDA CBR400R, HONDA CBR250RR (ABS), HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250RR, HONDA FTR, HONDA CBR250RR
OEM Product Quality NTB of the same etc.
NTB has a proven track record in automotive parts.
The quality is the same as OEM parts, but the price is low and Wallet-friendly.
No problems with installation.
View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
Fits: YAMAHA FZR250R, YAMAHA FZR250R, YAMAHA TMAX 500 (T-Max), YAMAHA R1-Z, YAMAHA FZX750, YAMAHA FZX750, YAMAHA FZR250R
About Order to Delivery
I was assured that Status would be in touch with me as needed, in detail from the time of order to the completion of delivery. View detail
Fits: YAMAHA XT250X, YAMAHA XT250X, YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR)
Is it the same etc. as OEM Parts?
Deterioration of this seal had caused the fork oil to ooze, and replacing this part interfered with the oil oozing.
However, it is difficult to evaluate the condition of the car since it has only been replaced and checked after about 50 km of driving, so it remains to be seen to what extent this condition will persist.
I would rate it as OK for now.
The work is quite involved because the front forks need to be removed and disassembled.
View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA Drag Star (DRUG STAR), YAMAHA XT250X, YAMAHA Drag Star (DRUG STAR)
I thought it was OEM Parts.
Since it is a Dust Seal, there is an oil seal inside this part, and since this seal is a part that shuts off like a pride guard, there should be no problem with its usability.
The Dust seal that was originally on the new car showed cracks after about 5 years, what about this part?
View detail
Fits: HONDA HAWK (CB400T), HONDA HAWK-III (CB400T), HONDA HAWK (CB400T), HONDA HAWK (CB400T), HONDA CR80R, HONDA CM400, HONDA CJ360T, HONDA CJ250T, HONDA CB400 Four (Four-), HONDA CB400 Four (Four-), HONDA HAWK-III (CB400T), HONDA SUPER HAWK (CB400 SUPERHAWKIII), HONDA SUPER HAWK (CB400 SUPERHAWKIII), HONDA SUPER HAWK-III (CB400 SUPERHAWKIII), KAWASAKI ELIMINATOR (Eliminator), KAWASAKI ELIMINATOR (Eliminator), KAWASAKI ELIMINATOR (Eliminator), KAWASAKI KLX125, KAWASAKI KX65, KAWASAKI KX65
Say goodbye to Yamaha's frail Seal
Recently Dust Seal is expensive and I'm fed up with replacing it every year when I notice a crack. oh and while I'm at it, I'll switch for half the price. View detail
Fits: HONDA BENLY CL50 (BENLY50), HONDA SUPER CUB 110 MD (SUPER CUB Postal Service), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), YAMAHA NEWS Mate 90
Overhaul.
I purchased this product for KS-1 parts because it was discontinued. View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500S, YAMAHA SRX250, YAMAHA SRX250F, YAMAHA SRX400
To YamahaRENAISSA
I have replaced it before, but the tip of the Shift wears off quickly. I think the durability is so-so. I think OEM Product is the best choice for those who are concerned about consumables because it is inexpensive. View detail
Fits: KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR250, KAWASAKI ZrX-II, KAWASAKI ZXR250, KAWASAKI ZrX-II, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI GPZ1100 ABS
Neither good nor bad
I bought it because it is an OEM Equivalent Product.
Well, the texture is normal. Durability is unknown.
Dust Seal is a Gold amount, so even if it cracks a little, it's okay.
View detail
Fits: HONDA TLM200R, HONDA MVX250, HONDA JADE SLASH S (JADE SLASH S), HONDA JADE (JADE), HONDA JADE (JADE), HONDA GB500, HONDA GB400, HONDA CL400, HONDA CBX550F, HONDA CBX400F, HONDA CBX400F, HONDA CB900, HONDA CB750FB BOLDOR 2 (BOLDOR), HONDA CB750F BOLDOR 2 (BOLDOR), HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA CB400SS, HONDA TLM220R, HONDA CB400SS
Overhaul
I had an overhaul because there was an oil leak, and I always buy from the manufacturer because it is no different from the OEM product. View detail
Fits: HONDA Ape (50) (APE), HONDA Ape (50) Type D (APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape(100) (APE), HONDA Ape(100) (APE), HONDA Ape(100) Type D (APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA Ape(100)(APE), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50), HONDA BENLY 50S (BENLY50)
Almost the same as OEM Product
Almost the same quality as OEM Product.
The price is about 70% of OEM Product.
Quantity, since it is one piece as a component.:Pair (for Left and Right) If you want to replace them, order them in twos.
Since we will have to wait and see about the durability, I gave it a satisfaction level of Minus 1.
View detail
Fits: HONDA Little Cub, HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB)
normally
[How is it used?
No problems
How was your experience with it?
Damper was damaged when Tire was replaced, so we replaced it while we were at it.
There is no particular change, but these Parts are
You should replace it as soon as possible.
You can't see it from the outside, and when you notice...
Patterns are so many lol.
It's not difficult as you just remove and replace it.
How did it compare to other products?
Either because it is no different from OEM
[Points to note]
Watch the direction!
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CRM250AR, HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
With Front fork Overhaul.
Used in Overhaul of Front fork.
The price was cheaper than OEM and the quality was not much different from OEM.
View detail
Fits: KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI Ninja ZX-6R (NINJA), KAWASAKI NINJA ZX-6RR (NINJA), KAWASAKI VERSYS (VERSYS), KAWASAKI VERSYS (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VULCAN
OEM same etc.
Since it is the same etc. as OEM, I think this is sufficient. View detail
Fits: KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI Z750, KAWASAKI Z750, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI ZR750S, KAWASAKI ZRX, KAWASAKI ZRX
Sufficient for use.
When replacing the rubber on the front footpeg, we only had one OEM product on hand, so we purchased the N, T, and B products for one side of the footpeg.
At a glance, there is no difference between the front and back of the product and the OEM Product.
The only difference? The only difference is that the OEM Product is glossy (anti-degradation? N,T,B are still in rubber, N,T,B have a die-cut mark and a mark on the back side. and there is an engraving on the reverse side.
Ninja 1000, but when placed side by side with the OEM, the product length is about 1mm shorter on the tip side.
Installation was completed without any problems, with Screw fastening to match the Base.
The conditions of use (straddling) are no different.
View detail
Fits: HONDA CBX125C, HONDA CBX125C, HONDA CBX125F, HONDA CBX125F, HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA NSR80
Used for NSR50 ForkOH.
The price is lower than that of OEM Product.
In addition, we did not find anything inadequate when using the product.
View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
Used to repair the PCX.
[How is it used?
Oil was seeping from the front suspension of my 2012 PCX.
I should have overhauled it right away because if the oozing oil adheres to the caliper or brake disc, it could cause a problem that should not have happened.
Currently, the blotchiness is not that much worse, so I wonder if it was minor.
I haven't heard that the previous owner did an overhaul of Front fork, so it's probably 10 years old.
Was the one you received as per Image?
As per Image
I chose NTB's OEM parts, which were slightly cheaper than the OEM parts and were in stock at Webig. No problem at all.
Was the installation difficult?
It was surprisingly easy. I had all the tools I needed, so I was able to overhaul it according to the textbook without any difficulty.
I worked from youtube and this Magazine article.
https://www.webike.net/magazine/maintenance/maintenance-undercarriage/79110/
How was your experience with it?
This is not a part for comfort or appearance.
But in such cases, it feels good to replace the whole set.
If you buy all the small parts, it will cost you a lot of money, but...
View detail
Fits: YAMAHA ZEAL (FZX250 ZEAL), YAMAHA XV750, YAMAHA XV1100, YAMAHA XJ600S, YAMAHA XJ400L, YAMAHA XJ400S, YAMAHA SRX400, YAMAHA SRX600, YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), SUZUKI SAVAGE (SAVAGE), YAMAHA Renaissa (RENAISSA), SUZUKI SAVAGE (SAVAGE)
front fork seal
as per specification. good product good product good product good product good product good product good product good View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB110 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 PRO (SUPER CUBPRO), HONDA SUPER CUB 50 MD (SUPER CUB Postal Service), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), HONDA SUPER CUB 110 PRO (SUPER CUBPRO)
OEM Product with the same etc. quality and cheap price!
The OEMfootpegRubber has deteriorated to the point where it's falling apart.
I made a purchase to replace it.
Rubber texture and dimension are the same etc. as OEM Product, but the price is a percentage
It's cheap and feels cosy.
For this price, you don't have to put up with any deterioration, you can get it right away.
I like the idea of replacing it with a new one. Always touch it while riding.
This is the part where you can ride comfortably.
You can install the parts cleaner in the hole where the footpeg goes.
I gave it a light spray and it just went in and Quantity.:Pair (for Left and Right) in addition
also took less than five minutes to work.
View detail