Reviews
Fits: HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio cesta (DIO CHESTA), HONDA Dio cesta (DIO CHESTA), HONDA Dio SR (DIO), HONDA Dio ST (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Live Dio (LIVE DIO), HONDA Live Dio (LIVE DIO), HONDA Live Dio J Special (LIVE DIOSPECIAL Knife), HONDA Live Dio J Special LIVE DIOSPECIAL Knife), HONDA Live Dio ZX, HONDA Live Dio・S (LIVE DIO), HONDA Live・Dio ZX (LIVE DIO)
Air Filter replacement for LIVE DIO ZX
[How is it used?
Installations at LIVE DIO ZX in 2002.
This is the second time I have used this product since I last replaced it in August '18.
Was the one you received as per Image?
It is wet and inexpensive, which is helpful.
What was different from the last time was that when the orientation was adjusted to the shape of the air cleaner box, the letters were inside.
What's that? Am I installing it wrong? I was a little worried.
It is Exactly in shape, so there seems to be no problem.
Was the installation difficult?
The air cleaner box is only stopped by a tapping screw.
The Air Filter can be removed immediately.
It was a full four years old, but there seemed to be no deterioration, and I wondered if it would still work. I thought so, but...
Replace it because it's cheap! The old one is discarded!
How was your experience with it?
Previously, when the OEM Product had been sitting idle for more than a decade, the
The Sponge was falling apart over time.
I realized once again that if we replace them properly, there is no problem.
I'll try not to slack off and do maintenance from now on!
[Included Parts:were they on?
Included Parts:Not available.
It is double bagged because it is wet.
[Was there anything that disappointed you?
The orientation of Logo inward is still a mystery.
Like the product photo, I think the cutout is correct on the top side. (^_^;)
View detail
Fits: SUZUKI AN125, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100, SUZUKI BANDIT400, SUZUKI VOLTY, SUZUKI VECSTAR150
Single Body offerings are appreciated.
I bought a used Motorcycle that was sucking a slight amount of secondary air, so I was looking into it and found that the Pilot screw O-ring was missing, so I bought this one.
I installed it immediately and the symptoms improved.
It is nice to know that small O-rings, which are prone to loss and deterioration, are sold in single bodies.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100, SUZUKI AN125, SUZUKI BANDIT400, SUZUKI VOLTY, SUZUKI VECSTAR150
NiceNNTB for even selling this stuff!
Quantity to match O-ring exchange:I bought it as a set
It works fine
View detail
Fits: HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> E Package (SUPER BOLDOR)
usually
First of all, I think the price is high. The difference from OEM is that the mesh holes are small in size. I think that the small holes increase the inhalation resistance. I wonder if they are doing their job properly because I have used them for 2000 km and they are not dirty at all. I have used it for 20,000 km and it has not been dirty at all, so I wonder if it does its job. I have used various external air cleaners in addition to this one, but I think the OEM was the best. I will go back to OEM for peace of mind. View detail
Elasticity.
[How is it used?
TZr250R (3XV) I bought this to add a Filter to the Fuel line of
I couldn't bear to Cut the OEM Line, so I used this product.
Was the one you received as per Image?
When I touched the product I received, I was surprised by its elasticity.
The OEM Fuel line is quite hard, but I wonder if it was originally this elastic...
It looks like OEM at a glance, so it doesn't stand out as strange.
How was your experience with it?
I bought one with an inner diameter of 7mm.
The new rubber is very resilient and I was able to install the 8mm OD Filter without difficulty.
I bought this product because I didn't want to cut the OEM Hose, but I'm thinking of changing that to this product as well, since it's elastic and easy to put on and take off. LOL!
[Points to note]
The size notation is a bit confusing, but except for special sizes, if you choose one with a smaller inner diameter, you're basically in the right place.
Also, the Hose clip is not included, so you need to purchase it separately if you need it.
How did it compare to other products?
I also used a common Pink Hose elsewhere, but it became hard after less than a year.
I'm wondering how long this product will keep its elasticity.
【Review】
I don't know how long this elasticity will be maintained, but so far I am very happy with it.
The price for 1 meter is also good, as OEM Parts can cost around a thousand yen for a dozen or so centimeters.
View detail
Introduced as OEM Replace
[How is it used?
Introduced as replacement for OEM of NSR250R MC18/88.
Traveling:Touring, mountain passes
Period of use:Used for about 2 years.
Chamber is NORMAL, and Others has no special custom.
Was the one you received as per Image?
As per image. It fits tightly and cannot be installed. There was nothing to worry about.
Was the installation difficult?
I just need to replace the OEM air filter, so it can be done without any problems.
It is delivered with oil applied and ready to use.
How was your experience with it?
The OEM air filter had probably not been changed since the car was new and was in tatters. (It had something on it that was the same age as me or older...)
Since this was a change from the previous system, the air intake efficiency was naturally improved and the system could be used without trouble.
The cost was good and I was satisfied with the large variation.
No Gap in Setting occurred.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
Although I have already given up my vehicle, I hope that you will continue to sell Replacement for OEM.Parts for NSR250R including this product for a long time to come.
Although there are environmental regulations, I believe that the 2ndReplica is a legacy that should be left to the future. I know it's hard for companies to keep production lines, but I hope the industry as a whole will follow this trend. As a rider, I hope that this will be the case.
View detail
Fits: KAWASAKI KLX300R, KAWASAKI KLX250SR, KAWASAKI KLX250R, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX250R, KAWASAKI KDX220R, KAWASAKI KDX200, KAWASAKI KDX200, KAWASAKI D-TRACKER (TRACKER), KAWASAKI D-TRACKER (TRACKER)
It was dirty.
The air cleaner that came with my car was dirty, so I switched to this one. It has plenty of oil in it and does a good job. View detail
Fits: HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R
try and see it for what it is
I looked at the air filter on my XR250 (MD30) and found that the 10 year old twin air was getting close to its limit.
Make it a Twin Air Filter-only supply.
K&NFilter.
Return to OEM
OEM equivalent AfterMarket products that are close to the original.
When I thought about it, I assumed that I would put it in NORMALCase, and I am setting the carburetor in Twin air, but if I go back to OEM, I will need to re-set it again, so I can't help but have a little gap, but I don't want to have large width setting, so I decided to use ? I'm going to use ? and ? So I thought about it with ?
The less sticky the inside of CleanerCase is, the better. So I decided to go with the ? The cost of the tire, tube, and rim band was too high, so I decided to go with the ? I decided to go with ?
So I saw a picture of NTB's XLR250 cleaner and it looked K&NFilter chic, so I bought it.
When I looked through the Filter in the sun, the Filter section was thicker than the K&NFilter, but it seemed to be more efficient.
The thickness of the CleanerSize is a little thin, so the Bracket of the Stopper is rattling, so I bent it a little to make it stronger and it became better.
However, it didn't fit well, so I looked at it on GlassTable and found that the hitting surface was slightly distorted.
So, I bent the hitting surface to fix it. Once I fixed it, it was perfect. That's where I wanted the accuracy to be.
That's where Minus1 comes in.
When I ran it, it was a summer setting, but it wasn't bad in the winter either, so I thought it was a winner. I felt that it was a hit.
It's cheap, so if it's good for the Season, it's Repeat.
If not, I'll think about it again.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI Zr-7S, YAMAHA XJR1300SP, YAMAHA FZ750, YAMAHA FJ1200, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R1100, KAWASAKI ZZR250, KAWASAKI Zr-7S, KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI Ninja 250R (NINJA), KAWASAKI KLE250 ANHELO, KAWASAKI GPZ900R For Malaysia Market
To ZrX1200DAEG
O-ring is also included, so it is easy to use.
The price is a little high, but
I guess the Filter effect is the same as the other ones.
View detail
Fits: KAWASAKI Z250SL, KAWASAKI Z125 PRO, KAWASAKI Z125 PRO, KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Ninja 250SL, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KSR110, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250SR, KAWASAKI KLX250R, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250
While changing Oil
Oil change and Element as well View detail
Used for ZEPHYR
I used it on my ZEPHYR Fuel line.
I chose this one because OEM ProductSize is not sold to the general public, and I had to buy OEM Parts, which is not very cost effective.
I replaced the fuel fliter at the same time, and I have no problems driving.
View detail
Fits: HONDA Julio (JULIO), HONDA Julio (JULIO), HONDA TACT (TACT), HONDA TACT (TACT)
ใช้ดีมาก ส่งไวมากกก ชอบมากก สินค้าดี แพ็คมาดีมากก ขอบคุณมากๆครับผม จะซื้อซ้ำอีก View detail
Fits: KAWASAKI Z250SL, KAWASAKI Z125 PRO, KAWASAKI Z125 PRO, KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Super SHERPA (SUPER SHERPA), KAWASAKI Ninja 250SL, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KSR110, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250SR, KAWASAKI KLX250R, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250
with O-ring
I bought it because I had Point saved up.
with O-ring, but it may not be a good deal.
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
In a sense, it's an OEM diversion.
I bought it when I was making Air cleanerBoxSpec. Box as it is and used it with Custom to make 90cc of Tube and Air cleaner.
CUB's 90 is no longer in production, so OEMParts are getting harder to come by, and they're expensive even at Oakshon (lol).
No problem as it is OEM compatible.
good point
The intake air volume can be increased without changing the air cleaner box.
It's cheaper than buying it at Oaktion.
OEM compatible, so quality is not a problem.
It is also durable.
If your car is out of print, it is difficult to supply the parts, so it is better to buy OEM compatible parts.
If you use the Air cleanerBox, you can be assured that the carburetor setting will not be affected even in the rain.
View detail
Fits: YAMAHA XV750E, YAMAHA XV750, YAMAHA XV1100, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600
I use it a lot because it's cosy.
[How is it used?
Bought for SR400.
It has Packing and is very good.
Was the one you received as per Image?
It is as per Image.
I've read in other people's impressions that the O-ring Size doesn't fit, but that wasn't the case for me.
How was your experience with it?
Exactly fits and makes seems to be no problem.
How did it compare to other products?
After all, with O-ring is good.
If you want to buy it separately, you will have to buy it more often, so it is convenient if it is included from the beginning.
View detail
Fits: HONDA FUSION SE, HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA XR BAJA (BAJA), HONDA XR BAJA (BAJA), HONDA SL230, HONDA SL230, HONDA SL230, HONDA PS250
good seal
Good carb float chamber seal. Flexible rubber. I had no problems with installation. Suits as well as OEM seal. No fuel leaks after installation. View detail
OEM Product Quality
It's an OEM Product quality NTB, so it will be durable and Large durable. View detail
Fits: SUZUKI DR250R, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty Type T (Volty Type T), SUZUKI Volty typeT, SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI, SUZUKI Volty typeC, SUZUKI ST250, SUZUKI ST250, SUZUKI Intruder LC250 (INTRUDER), SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker (GRASS TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI GOOS (GOOSE)
with O-ring。
The O-ring is included to save you the hassle of ordering OEM Parts. View detail
Air filter
It's also cheap and affordable. View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500S
OEM same!
[How is it used?
Used to replace OEM Filter which was deteriorated in maintenance of SR400.
OEMFilter 5Y1-14451-00 costs about 4000 yen, so I decided to use genericParts.
How was your experience with it?
Size, shape, and material are comparable to OEM Filter.
I have used the NTBFilter for other models before and had no problems, so this is another Repeat.
The Wet Filter needs to be soaked in oil, but it is already moistened with the appropriate amount of oil, so it is not necessary to use a wet filter.
You can install it as it is.
How did it compare to other products?
Comparison with OEM… I think it is the same performance quality as OEM.
[Points to note]
The Urethane foam Air CleanerElement has a Merit that can be washed and reused, but on the other hand, it degrades and polishes up, so it needs to be replaced every few years!
View detail