Reviews
SEROW225 WE would like to see it listed in the Custom parts section.
[How is it used?
I had been using a 1997 SEROW225 WE by replacing the deteriorated seat cover with a certain manufacturer's fabric, but while playing in the mountains, I fell on a rocky terrain and damaged it...
Later, sadly, Webike's SEROW225. I was looking at the custom parts section of the "For re-covering Seat fabrics" and found NTB's famous Seat fabrics!
I was wondering why I haven't seen it listed in Webike's SEROW225 WECustom parts section, even though I've seen it on other sites. SEROW225. You were listed only in the column etc.
The product image shows that from 4J5~. (so called 225WE) Design shape of the SEROW225, so it is more than listed in the SEROW225 section. SEROW225 WE We would like to see it listed for use.
rather MotorcyclePartsCenter. I would so much like to reverse the listing of the Seat for SEROW in the "Seat for SEROW" as it is a pre-225WE Type.
How did you like it?
As mentioned above, the MotorcyclePartsCenter Seat fabric used before this product was sewn for Seats before 225WE, so there was some force required to attach it to the Seat for WE, but this product was sewn Exactly for WESeat, so the attachment process went smoothly. However, this product was Exactly sewn on WESeat, so the work proceeded Smoothly.
The fabric is thick enough, and the SIDE part "YAMAHA" If the Logo is included, you will not notice that it has been reupholstered, except for the Owner, because the finish is so natural. (I think SEROWMania will understand because the sewing parts and texturing of the fabric are different...) 。
I personally think this is the best alternative Seat fabric for SEROW225 WE because of its low price.
How did it compare to other products?
The SEROW225Series Dedicated I don't have many options for Seat fabrics. (excluding OrderSeat) I think this product is the best fabric as a ready-made product.
As of 2024, Seat Covers are still available on YamahaOEM... on YamahaHP. Part No. 4JG-2477A-00Seat Cover Assembly (skin only), price 17,380 yen I will
NTB's Seat Cover costs 2,850 yen, and although there is no YAMAHA Logo on the Seat side, the product is more than adequate considering the price difference.
[Points to note]
Since the Draping is designed to fit the shape of the SEROW225 WE OEMSeat, the reupholstering process itself is relatively easy and Beauty.
In addition, there is an NTB Channel on YouTube, where you can learn how to set up a seat, hang, etc. in an easy-to-understand manner. (What is put up in the video is not for SEROW) If you are not confident, you should take a look at one.
Other items that would be helpful
The deciding factor in the purchase
Made by NTB for safety and stability, this was seriously the deciding factor in my purchase.
It's not fancy or fancy, but it has OEM-like quality, and at a reasonable price, it's easy to buy.
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:Did it come with 1pc. and Tandem belt?
The 1997 SEROW225 WE does not have the with Tandem Belt from the beginning, so there is no problem without it.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it.
In my case, I do not apply Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
As I drive an older vehicle, NTB's Seat fabric is an indispensable product for me, so please keep the lineup going as long as possible!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90
Satisfied enough if you don't mention details.
The OEM side cover had cracked and fallen off sometime due to age-related deterioration.
The one that came with it was White with IonCrack like grain, so I had a hunch it was finally the day.
I didn't want to run with the battery exposed, so I ordered the NTB side cover that I had been eyeing beforehand. The reason why I chose Other Brand Product over Honda OEM is because the price is more wallet-friendly than OEM parts, and the stock is available and the delivery time is short. The most important reason is that the Front Fender I replaced before had a longer IonCrack time than the OEM.
When the actual product arrives, it is clear that the thickness of the material is modest. However, the fit is not bad, and the distortion is not a concern, and it is not a part that needs strength, so I think this is OK.
I know that NORMAL supremacists may snicker at me, but I only want practicality from my CUB, so this is good enough for me. It was a good purchase for me.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50
Better than I expected.
The Side cover on the Right Side cracked and fell off and was replaced by an NTBSide cover, so the Quantity:Pair (for Left and Right) I don't want the Left to be an unintended color difference, and if the Right is cracked, the Left won't be for long, so I decided to replace it together.
The OEM side cover came in White, but NTB offers only Cosmic Blue and Aba green, so I chose Blue, the same color as the car body. I chose the same color as the car body, Blue, because NTB only offers Cosmic Blue and Aba green. Well, it is natural that the newer the model year, the more the color scheme will be the same.
The mounting screws are ported from the original side cover. It is not a particularly important work.
The fit is good, and so far, no one has asked me why I used external parts.
From my experience, the NB exterior is more durable to IonCrack than HondaOEM, so if you are not particular about OEM, you should use it.
View detail
Fits: SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Birdie 50 (Four Cycles BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE), SUZUKI 4Cycles Bridie 80 (for Cycle BIRDIE)
Seat cover
Size is also good and could be reupholstered. View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Uncoated and used
I wanted the high seat set up on the Z125, but it was about 30,000 on ebay!
I couldn't afford that kind of price for Seat in SL, so I made it myself.
Ancho is a 20mm thick Sponge sold in Jungle for about 600 yen, OriginalCover is removed and glued.
Shave it with a grater Gold to shape it and cover it with this product.
The SIDE of the original anchor was cut off to fit.
The surface of the Seat has a non-slip Tank Pad-like texture, and the Grip has been increased.
The OEM has a glued front edge corner so it fits better, but this product has a thicker fabric and sewn finish so the corner fit is a little worse, although it is not very visible once installed.
Also, the anchored area interfered a little with the Rear Sets and I had to push it in quite a bit to get it to lock.
I think the price is low enough for the front and back, but I only used the front, so it would have been even better if the price was lower for the front and back separately.
View detail
Fits: KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator)
kawasaki VN250A seat cover
First, I purchased this for lower price than genuine. More attractive than I thoght. Very good product. Surface of seat is especilly good. No slippery and shape and fir good seat frame. View detail
For Screen fixation
Material:Well nut that is a Rubber product and should be replaced regularly.
This time I purchased it for fixing Cowl's Screen.
The rubber is hardened to the point of pushing after 30 years, so it would have to be replaced anyway, but the previous owner had tightened it so much that the well nut was deformed and would not come back.
Since it is very common to use M4-size well nuts to fix the screen, there is no problem with these well nuts without having to purchase expensive OEM parts.
Some universal well nuts are too thick for screen fixation, but NTB's well nut is the thinnest type among universal well nuts.
It is truly OEM compatible.
Conversely, well nuts used for fixing brackets of auxiliary equipment would have a thicker flange, making them somewhat unsuitable.
Unfortunately, the Screw that I thought was M4 was actually M5, and this product was not available.
It's all my fault that I couldn't use it, so I don't blame myself.
Well, maybe you'll use it sometime! Maybe!
View detail
Used for Side bagBracket
Used to make my own side bag mounting bracket.
It is thick and solid in terms of strength.
View detail
For M6, which seems to be available but is not so easy to find, and Flange thin type
Material:Well nut that is a Rubber product and should be replaced regularly.
It is often used for fixing Cowl screens, etc., but in recent vehicles, it seems to be widely used for various brackets and auxiliary equipment mounts.
Large holes can be absorbed by the rubber part, and there is no need to embed the nut in the fixed object.
In DUCATI, it began to be used extensively after 1990, and in the 1991 900SS, it is used in various places on various parts of the body.
It must have been so easy, because Cowl mount was well nut in all places!
The large cowl (and the Seat Cowl in the 900SL) is supported by a bolt called M6, which is a thicker bolt, but the receiving side of the frame is all well nuts.
Of course, M6 well nuts are sometimes used on domestic cars, but the overwhelming majority are M5 and M4 size, so there are not many types of M6 well nuts to choose from when looking for a universal product as a repair item for motorcycles.
In such a situation, this product is Exactly as UniversalWell nut of M6.
There are several types of wall thickness in the Flange section, and this is the thinnest type in NTB.
It is best suited for locations where the design does not consider fixing the object with a deformation of the Rubber of Flange, but simply uses it as an embedded Nut.
View detail
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets G (LETS G), SUZUKI Lets(LETS)
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
Seat reupholstering of moped
The texture is almost the same as OEM. The reupholstery process was also not confusing because of the instructional video.
It's been about half a month and no sagging. 。 It is a very comfortable seat.
View detail
High quality.
The OEM Seat skin tore and I purchased this product.
The skin is a little thicker than the OEM Seat skin, but it is flexible and even a beginner could easily reupholster it.
Seat grips when driving are also fine.
I am also satisfied with the OEM look of the Large.
View detail
Fits: HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart・Dio DX, HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio Z4 (SMART DIO), HONDA Smart・Dio Z4 (SMART DIO)
Even amateurs are satisfied with the results there.
This was my first attempt at Seat reupholstery for SMART DIOAF56.
In terms of work, all you have to do is to hit Staple with Tucker and fix Seat so that it does not become Wrinkle.
I also used Tucker for the first time, but it was easier than I expected because the Seat fabric matches the Seat shape and is stretchy and thin.
The finished product is now PRO grade on the front side of the Seat.
The staple on the reverse side could not be typed very neatly, but since it is an invisible part, it does not bother me that much.
Seat is made to be comfortable and soothing without any slippage.
The fabric is inexpensive and worth a try.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
Honda hornet CB250F6/F7
This is specially for honda hornet late version cb250 F6/F7 two tone seat cover (same as genuine). Good quality Japanese material & fabric.neatly fitted to the seat base.each edges and corners are perfectly fitted without any modification. Highly recommended for hornet lovers. View detail
4mmWell nut
I bought this well nut to see if I could fix the screen using M4Screw.
Quantity:1 Set of 10pcs. is not that expensive, so it seems to be quite useful.
I would also like to find a nice fixed Bolt to match.
View detail
Fits: KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator)
Eliminator 250 seat review
Original seat cut and damaged with long period using. Design fit perfectly and side leather is good for slippery. This will be good alternative View detail
Air Tucker is a must!
I purchased this product to replace the seat upholstery on my Address125 Flat seatSpec.
Even a HandTucker of about 1000 yen is Large sturdy if properly hammered with a 6mm needle.
The 100 needles that came with Tucker were not enough during the process, so I think it is safe to prepare about 150~200 needles.
The center lines are marked on the front and back of the body, so it was easy to work with, and the dimensions were perfect, so there was no need to cut and align extra sections after reupholstering.
If it is a Normal seat, it may be that the Quantity:Pair (for Left and Right) may need to be cut a little.
Note that there is no space for the HandTucker to hit the front end of the Seat because the Seat hinge is in the way. This is impossible without an Air Tucker.
Because of this problem I did not remove the old Seat skin and put this product over the top.
The OEMSeat costs 26,000 yen, so I am happy to be able to make it like new for less than 4,000 yen.
View detail
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsIIDX (LETS TwoDELUXE), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIS (LETS Two S)
It also looks good.
I am very happy with the purchase because the material has a good texture, is easy to apply, and looks different. Moreover, it is inexpensive! View detail