Reviews
Fits: HONDA BENLY50110, HONDA BENLY50110, HONDA BENLY50, HONDA BENLY50, HONDA GYRO CANOPY, HONDA GYRO X, HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Up (GYRO Up), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY)
It's a good product
It is being used well as a replacement for the genuine Benley 110.
It fits well without any discomfort and the operation is no different from the original.
This is a satisfactory product at an affordable price.
Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. -------------------------------------------------- -------- It is being used well as a replacement for the genuine Benley 110. It fits well without any discomfort and the operation is no different from the original. This is a satisfactory product at an affordable price. Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. Powered by Google Translator
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Ponting on Vmax1200
I always use them because they are cheaper than OEM and the quality is good.
However, only the NORMAL length is sold, so it may not be possible to install if an Up Handle etc. is attached.
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZZR1200, KAWASAKI KLE250 ANHELO, KAWASAKI KLE400, KAWASAKI NINJA ZX-7R (NINJA), KAWASAKI NINJA ZX-7RR (NINJA), KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI ZZ-R1100, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZXR750R, KAWASAKI ZXR250
Good quality paint for the price.
The quality of the matte Black paint is quite good for the low price.
The NTB logo mark is also included, but since it is on the reverse side, it is not visible at all.
The grip is the same as OEM.
It is 100 times better than the cheap Anodized Lever which I don't understand.
View detail
Fits: KAWASAKI ZZ-R1100, KAWASAKI ZZR1200, KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZRX1200 DAEG, KAWASAKI NINJA ZX-7RR (NINJA), KAWASAKI ZRX1100, KAWASAKI NINJA ZX-7R (NINJA), KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ1100 ABS, KAWASAKI GPZ1100
Cospa is crazy good.
If you don't like OEM-like but bare Aluminum Silver, this is the one for you.
If I may say so, I personally wish there was no Plating in Adjuster.
View detail
Fits: YAMAHA XSR700, YAMAHA TRACER900 (ToRacer), YAMAHA TRACER900 GT (ToRacer), YAMAHA MXT850D, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA MT-09A, YAMAHA MT-07A, YAMAHA MT09TRA, YAMAHA MT09TRA, YAMAHA MT09A, YAMAHA MT09, YAMAHA MT07A, YAMAHA MT07A, YAMAHA MT07, YAMAHA FZ1-N, YAMAHA FZ1, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300
Nice.
The installation was purchased and installed with the information that it is compatible with Yamaha cars, even though it is not a Yamaha car.
It fit perfectly as per the information!
Ease of use is also superior to OEM.
Thanks to our predecessors for the information.
View detail
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB)
throttle cable
Excellent throttle cable, inexpensive replacement for the old original cable. Everything went great.
I recommend to buy. -------------------------------------------------- -------- An excellent truss of gas, inexpensive replacement for the old original cable. Everything came perfect. I recommend the purchase. Powered by Google Translator
View detail
Fits: SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse), SUZUKI IMPULSE (Impulse)
Accelerator Wire is now working better!
The Accelerator Wire on my gsx400Impulse GK79A got stuck and stopped working, so I replaced it myself. Even such a simple repair would have cost a lot of money if I had asked a store to do it. It was quite a difficult job to do by myself, but I was able to get it back at a reasonable price. The store was quick to ship and I was able to replace it right away. View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 Motard, HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD)
OEM Product is discontinued….
[How is it used?
I purchased this product because the original installation had fluffed up.
OEM Product was discontinued.
I bought it with Pull Side.
Was the one you received as per Image?
No difference from OEM Product.
Nut position is also the same.
How was your experience with it?
It is the same as OEM Product, so there was no problem.
[Points to note]
It is safe to say that there is nothing in particular.
Pull Side and Quantity:You can buy it at Set.
How did it compare to other products?
Not much else was available, so that was helpful.
View detail
Fits: HONDA XR250, HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250 Motard (MOTARD), HONDA XR250
Same as OEM Product
[How is it used?
I purchased this product because the original installation had fluffed up.
OEM Product was discontinued.
Was the one you received as per Image?
No difference from OEM Product.
How was your experience with it?
It is the same as OEM Product, so there was no problem.
[Points to note]
It is safe to say that there is nothing in particular.
How did it compare to other products?
Not much else was available, so that was helpful.
View detail
Fits: SUZUKI Intruder LC250 (Intruder), YAMAHA TZR250, KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 (VULCAN400), KAWASAKI VULCAN 1500 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI ESTRELLA, KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI ZEPHYR 750 (ZEPHYR)
It is cosy with OEM same etc.
Brake lever of SUZUKI's GRASS TRACKER was replaced because it was broken.
Cosmetics are good, no discomfort, no problems!
View detail
Fits: HONDA Today (TODAY), HONDA Today (TODAY), HONDA Today, HONDA Today, HONDA TACT (TACT), HONDA TACT (TACT), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB)
Used in place of OEM Product
Brake lever was bent, so it was replaced.
I chose it because it is not an alternative to OEM and the quality is good.
View detail
Budget replacement for old model
I have problem searching for original parts for a 1990 year Honda Bike. But no need to worry because the NTB clutch cable is a good substitute. I choose the stainless version to adopt the humidity weathers. It is still in good condition after install for a year. View detail
Fits: YAMAHA Grand Majesty 400 (GRAND MAJESTY), YAMAHA TMAX 500 (T-Max), YAMAHA Majesty (MAJESTY), YAMAHA TMAX (T-Max), YAMAHA MAXAM (MAXAM), YAMAHA Majesty (MAJESTY), YAMAHA Grand Majesty 400 (GRAND MAJESTY), YAMAHA Maxam (MAXAM)
sg20jMAJESTY250
It can be replaced with a normal replacement without any problems.
Inner Color was reused, be careful not to throw it away!
The crookedness was cleaned up.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400RII, YAMAHA XJR400, YAMAHA XJR400S
It worked fine.
It can be used on XJR400 4HM without any problem. View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
Lever ratio is 37.5
It was
Purchased to make the clutch on my SV650 run better.
OEM is 34mm.
I bought all kinds of holderetc.
When I contacted NTB, they told me the lever ratio of the relevant car model, but they did not tell me about other car models....
I wonder if there is anywhere that summarizes this.
View detail
For Replacement, purchase
I replaced it with a new one due to elongation caused by age-related deterioration over the years, but it was very compatible and responsive, and I am glad I purchased it. View detail
Nearly OEM Equivalent Product
This is an impression of using it on a C-type ZZr1100. It seems to be usable without any problem since it is common with D type.
We bought a ZZr that had been laid up for a long time, and when we raised it up, we checked every part of it and found that the Throttle Cable was also not working properly, so we replaced it. The texture and dimensions are almost the same as the OEM cable, so I was able to install it on the vehicle without any concerns.
I have used NTB's OEM Equivalent Product on other motorcycles I own and am satisfied with its quality, including durability, so I purchased it again this time and I still feel secure. I am satisfied with the quality of NTB OEM Equivalent Product including the durability.
I really appreciate the fact that Repair Parts can be purchased new even though it is an old Motorcycle. I am planning to repeat this service again in the near future.
View detail
Fits: HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
OEM same etc.Size!
I used it on my HondaCBR929RR.
For better or worse, OEMs are the same etc.
The heat resistant protective rubber to pass through the side of the Engine was thinner than OEM, so I was a little nervous.
The removed OEM rubber was cut and wrapped around the top to secure the Tie Wrap.
After purchasing, I checked the price of the OEM Product webig and found that it had the same Gold price, which made me wish I had gone with OEM.
I have no problem in using it, so it's good, but I give it a minus 1 rating because the rubber thickness was too thin.
View detail
Accelerator Wire on cb750 with …
To replace the carburetor, we had to remove the carburetor box and shift the carburetor slightly, which would have been much easier;
I think it's the strongest in terms of quality and costa…
View detail