Reviews
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Normal Mirror for mopeds.
ThirdMotorcycle's Today Mirror snapped off and I had to replace it. Very easy to read! Reasonably priced! … Too bad the Week Point is a little cheaply made…. "luxury" This is not for those who are looking for the best Mirror for their feet, but it is the best Mirror to wear on a foot scooter! View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
Lever ratio is 37.5
It was
Purchased to make the clutch on my SV650 run better.
OEM is 34mm.
I bought all kinds of holderetc.
When I contacted NTB, they told me the lever ratio of the relevant car model, but they did not tell me about other car models....
I wonder if there is anywhere that summarizes this.
View detail
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Visibility is quite good
As the Title says. Anyway, visibility is good! But I don't like the Design! LOL!
Honestly, there's not even a lackla of luxury, but it's affordable and highly visible! For a city scooter.
It's a great recommendation!
View detail
Fits: HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Rear view mirror NTB
Purchased for Honda Little Cub. In external condition, everything is fine, there are no differences from the original. Installation went without problems. In motion, I tried to adjust the position and the reflective glass element burst. It turned out to be thin glass. Not a pleasant situation, the season did not work. I won't take it anymore. The rectangular shape gives the worst view. Purchased for Honda Little Cub. In external condition, everything is fine, there are no differences from the original. Installation went without problems. In motion, I tried to adjust the position and the reflective glass element burst. It turned out to be thin glass. Not a pleasant situation, the season did not work. I won't take it anymore. The rectangular shape gives the worst view. View detail
Similar to OEMMirror for Yamaha-based Motorcycle
[How is it used?
Used for LightCustom on a moped 2 Scooter.
Was the one you received as per Image?
The texture was good for the price, but at first glance, I wondered if the size of the mirror surface was too small. I thought it was small.
Was the installation difficult?
Installation can be done only with Spanner, but before purchasing, check whether the Motorcycle Mirror you have is a Normal Thread Screw or Opposite Thread Screw, and whether the screw diameter is the correct thickness. Check the diameter of the screw carefully.
How was your experience with it?
After installation, the mirror looks like a plating mirror, so it has a custom look. However, when looking at the mirror surface while driving, it is difficult to check the rear because of its small size.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The mirror surface is unexpectedly narrow, and if too much force is applied to change the angle of the Mirror, it feels as if it will break easily (not the mirror surface, but the area around the base).
In my case, I want to prevent corrosion of the plating as much as possible, so before installation, I installed an automatic for-vehicle [Color] I sprayed it with ClearSpray before installation. I am not sure about the durability yet.
View detail
Fits: SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S), SUZUKI AVENIS 150 (Avenisu), SUZUKI ADDRESS V50 (Address), SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address), SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS (Address), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ)
OEM and color was different.
Color was different from OEM, but not available, so it was used as is.
Almost the same as OEM, but slightly different Curve.
Price is important.
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZZR1200, KAWASAKI KLE250 ANHELO, KAWASAKI KLE400, KAWASAKI NINJA ZX-7R (NINJA), KAWASAKI NINJA ZX-7RR (NINJA), KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI ZZ-R1100, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZXR750R, KAWASAKI ZXR250
Shape is not a problem.
Purchased as a spare for OEM.
It's in perfect shape.
Dial's turning feeling. "Snap" I'm not sure what to make of it, but I'm not sure how to make it work.
No problem at all in using it.
View detail
He was very active in waking up the vehicles.
[How is it used?
When I disassembled the VTR250 and reassembled it again, the cable that was attached to it was broken, so I decided to change it.
Was the one you received as per Image?
It's an OEM look that doesn't feel custom for better or worse.
Now I think that I should buy OEM, but there is no problem with the length. Well, I can write Impression and get Point.
Was the installation difficult?
No problems with installation.
Grease up together and finish.
How was your experience with it?
There's no special Touch feeling.
It's normal-of-normal.
Now I just have to see how many years I can keep it … I'm sure I'll get tired of it before then.
[Included Parts:were they on?
Nothing special.
[Was there anything that disappointed you?
Nothing special.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
This is a Pull Side Cable, you can buy Reverse Side with it.
View detail
He was very active in waking up the vehicles.
[How is it used?
When I disassembled the VTR250 and reassembled it again, I found that the cable that was attached to it was broken, so I decided to change the whole set.
Was the one you received as per Image?
It's an OEM look with no Custom feel, for better or worse.
Now I think that I should buy OEM, but there is no problem with the length. Well, I can write Impression and get Point.
Was the installation difficult?
No problem with installation. The length is also no problem.
Grease up around Thailandco and finish.
I know it's better to lubricate the inside with wire injector or something, but doesn't it leak when you put it in?
How was your experience with it?
There's no special Touch feeling.
It's normal-of-normal.
Now I just have to see how many years I can keep it … I'm sure I'll get tired of it before then.
[Included Parts:were they on?
Nothing special.
[Was there anything that disappointed you?
Nothing special.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I bought Throttle, Brake hose, and Speedometer Cable together to change a set of Cable. When I change it in one change, the appearance changes at a dash, and it is good.
View detail
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY)
A little short?
I used it to service a 30 year old GORILLA. 。 It can be installed itself, but the overall length of the wire is about 20mm shorter than the NORMAL wire, which makes it a little difficult to handle. (Functionally, it's not a problem, but I think it would have been even better if it was made the same size as the NORMAL wire. View detail
2 piecesQuantity:Not the Set!
Quantity because there are two of them in the picture:Pair (for Left and Right) I asked for one as a
I feel like I've lost something.
It's hard to understand. You have to put a comment in the picture to understand it.
View detail
Fits: HONDA DAX (Dax), HONDA DAX (Dax), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA PRESS CUB 50 (CUB PRESS), HONDA TACT (TACT), HONDA SUPER CUB 90 (SUPER CUB), HONDA TACT (TACT), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB)
OEM and same etc. Goods
【What made you decide the purchase?】
- Mirror was damaged by falling, so I had to purchase it suddenly. So we purchase NTB Mirror, which is cheaper than OEMMirror
【How was it actually used?】
- Making MirrorReverse side merely different stamps, almost the same Mirror. There were two kinds of fixed Nut, but I did not use it but ported NEM and Cover of OEMMirror
- Right tried running OEM Mirror and Left NTB Mirror for a while but there is no strange vibration and it is easy to see it is the same as OEM
[Is there anything I was disappointed about?]
- None
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Personally, the combination of Nut and Cover was good, so I wish I could choose the type of Nut
【Have you compared items?】
- OEMMirror
[Others]
- Especially without trouble price is also cheaper than OEMMirror, so I will buy NTB Mirror if I let it break again
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Unchanged with OEM Product
I was able to use it as OEM Product. Since the price difference with OEM Product is a little, I think that it is OK even if OEM product is sticking to it. Maintenance is the same as OEM or outside the company so I would like them to last long. View detail
Cost performance Yoshi!
MR-202R is Yamaha 10mm Opposite Thread Screw a few items that can be attached without an adapter.
By the way Left Side MR-201L.
As it looks good on Basic, it seems that it can be installed in various types of vehicles without discomfort.
The price is also Reasonable.
Plating does not seem to be bad.
Visibility is also normal. There is no blur in the actual running speed range and there is no problem.
View detail
Fits: HONDA CB1100, HONDA CB750F, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB900, HONDA CB750F BOLDOR 2 (BOLDOR), HONDA CB750FB BOLDOR 2 (BOLDOR)
Purchase to spare
Clutch Cable was frayed, so I bought it for spare. I have not installed yet, but I think that making is comparable even if compared with OEM. I think that it is more secure to purchase here than to purchase with an unnamed Brand that you do not understand. View detail
Fits: HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
a CUB90 -- custom-made one .Although the touch which will seemingly be pure is pleasing, although the joint of the Mirror is a ball, it is slightly loose, and a position shifts only by touching a few.(A wind speed is borne) There is no problem in a p
a CUB90 -- custom-made one .Although the touch which will seemingly be pure is pleasing, although the joint of the Mirror is a ball, it is slightly loose, and a position shifts only by touching a few.(A wind speed is borne)
There is no problem in a part to usually use.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
For a Throttle-wire piece, since it wanted early, it purchases. The thing itself is satisfactory at all. However, although the point of a Wire is attached to the Throttle part by the side of a carburetor, it has a close game. It is b
For a Throttle-wire piece, since it wanted early, it purchases.
The
thing itself is satisfactory at all.
However, although the point of a Wire is attached to the Throttle part by the side of a carburetor, it has a close game.
It is better to remove a carburetor obediently, although
one exchanged without removing a carburetor.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
Although the Axel Wire was ordered for the Axel-Wire piece, the Clutch wire was also ordered in passing. Since it was what carried out used purchase of the car body, to the same Timing, he thought that it would go out soon and they were worries
Although the Axel Wire was ordered for the Axel-Wire piece, the Clutch wire was also ordered in passing.
Since it was what carried out used purchase of the
car body, to the same Timing, he thought that it would go out soon and they were worries.
It is easy, and
exchange does lubrication work and is completion in tension adjustment.
The
motion also became a Smooth.
The Clutch wire attached until now [
] is under storage as a reserve.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI Eliminator 250LX (Eliminator)
Since the price was cheap, it purchased, but it can be especially used without fault.
Since the price was cheap, it purchased, but it can be especially used without fault. View detail