Reviews
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Lower price than OEM Product
CUBs with round lights prior to the year #039;11 have a Handlebar diameter of Quantity:Pair (for Left and Right) identity
(Other CUBs & general motorcycles have a narrower diameter on the Left side)
the point is Two for Right. Just buy it.
I don't care whether it's RGH-01 or RGH-03.
The one that was cheaper at the time. Buy two." OK if you are
There is no direction of rotation or anything like that, so Quantity:Pair (for Left and Right) Identical.
If you think I'm lying, look at the picture.
If you find other products you like
Buy Two for Right." You can attach whatever you like if you use only
I like the product very much.
It's as inexpensive as OEMs, and it's available at a lower price.
As a reminder
GripCenter. "NTB The engraving of the
If you don't like it, you can mount it with that side down and it won't be visible.
View detail
Fits: YAMAHA Grand Majesty 400 (GRAND MAJESTY), YAMAHA TMAX 500 (T-Max), YAMAHA Majesty (MAJESTY), YAMAHA TMAX (T-Max), YAMAHA MAXAM (MAXAM), YAMAHA Majesty (MAJESTY), YAMAHA Grand Majesty 400 (GRAND MAJESTY), YAMAHA Maxam (MAXAM)
sg20jMAJESTY250
It can be replaced with a normal replacement without any problems.
Inner Color was reused, be careful not to throw it away!
The crookedness was cleaned up.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400RII, YAMAHA XJR400, YAMAHA XJR400S
It worked fine.
It can be used on XJR400 4HM without any problem. View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
Lever ratio is 37.5
It was
Purchased to make the clutch on my SV650 run better.
OEM is 34mm.
I bought all kinds of holderetc.
When I contacted NTB, they told me the lever ratio of the relevant car model, but they did not tell me about other car models....
I wonder if there is anywhere that summarizes this.
View detail
For Replacement, purchase
I replaced it with a new one due to elongation caused by age-related deterioration over the years, but it was very compatible and responsive, and I am glad I purchased it. View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Rubber grips
Purchased for HONDA SUPER CUB 50 CUSTOM. Excellent quality handles. Everything came up. It was nice to update the old rubber handles. Part number: RGH-01 is the right handle (where there is gas), the hole diameter is 25mm. Part number: RGH-02 is the left handle, the hole diameter is 22mm. Consider this when ordering. Purchased for HONDA SUPER CUB 50 CUSTOM.The handles are of excellent quality. Everything came up. It was nice to update the old rubber handles.Part Number: RGH-01 is the right handle (where the gas is), the hole diameter is 25mm.Part Number: RGH-02 is the left handle, the hole diameter is 22mm. Keep this in mind when ordering. Webike change the previous review to this one - I always upload a photo, but it didn't load in the previous review. View detail
Nearly OEM Equivalent Product
This is an impression of using it on a C-type ZZr1100. It seems to be usable without any problem since it is common with D type.
We bought a ZZr that had been laid up for a long time, and when we raised it up, we checked every part of it and found that the Throttle Cable was also not working properly, so we replaced it. The texture and dimensions are almost the same as the OEM cable, so I was able to install it on the vehicle without any concerns.
I have used NTB's OEM Equivalent Product on other motorcycles I own and am satisfied with its quality, including durability, so I purchased it again this time and I still feel secure. I am satisfied with the quality of NTB OEM Equivalent Product including the durability.
I really appreciate the fact that Repair Parts can be purchased new even though it is an old Motorcycle. I am planning to repeat this service again in the near future.
View detail
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Visibility is quite good
As the Title says. Anyway, visibility is good! But I don't like the Design! LOL!
Honestly, there's not even a lackla of luxury, but it's affordable and highly visible! For a city scooter.
It's a great recommendation!
View detail
Fits: HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA CBR929RR, HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade), HONDA FIRE BLADE (Fire blade)
OEM same etc.Size!
I used it on my HondaCBR929RR.
For better or worse, OEMs are the same etc.
The heat resistant protective rubber to pass through the side of the Engine was thinner than OEM, so I was a little nervous.
The removed OEM rubber was cut and wrapped around the top to secure the Tie Wrap.
After purchasing, I checked the price of the OEM Product webig and found that it had the same Gold price, which made me wish I had gone with OEM.
I have no problem in using it, so it's good, but I give it a minus 1 rating because the rubber thickness was too thin.
View detail
Fits: HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Rear view mirror NTB
Purchased for Honda Little Cub. In external condition, everything is fine, there are no differences from the original. Installation went without problems. In motion, I tried to adjust the position and the reflective glass element burst. It turned out to be thin glass. Not a pleasant situation, the season did not work. I won't take it anymore. The rectangular shape gives the worst view. Purchased for Honda Little Cub. In external condition, everything is fine, there are no differences from the original. Installation went without problems. In motion, I tried to adjust the position and the reflective glass element burst. It turned out to be thin glass. Not a pleasant situation, the season did not work. I won't take it anymore. The rectangular shape gives the worst view. View detail
Accelerator Wire on cb750 with …
To replace the carburetor, we had to remove the carburetor box and shift the carburetor slightly, which would have been much easier;
I think it's the strongest in terms of quality and costa…
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Gripsa NTB.
Acquired for Honda Little Cub to replace what was after the acquisition. Outwardly, it is very similar to stock from the factory, everything is wonderful in quality. Installation went without problems. Out of season, excellent condition. I recommend! View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Rubber grips
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Excellent quality pens. Everything came up. It was nice to update the old rubber grips.
Part number: RGH-01 - this is the right handle (where the gas is), the hole diameter is 25mm.
Part number: RGH-02 is a left handle, hole diameter 22mm.
Please take this into account when ordering. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Handles of excellent quality. Everything came up. It was nice to update old rubber pens. The article of the details: RGH -01 is the right handle (where gas), the diameter of the hole is 25mm. The article of the details: RGH -02 is the left handle, the diameter of the hole is 22mm. Consider this when ordering. Powered by Google Translator"
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
High Quality and low cost
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bearings still handled perfectly.Oh well. Do em , do em right; shouldn't be a problem for a long time. …..I bought two set of ball bearing for my future reference.'love it View detail
Similar to OEMMirror for Yamaha-based Motorcycle
[How is it used?
Used for LightCustom on a moped 2 Scooter.
Was the one you received as per Image?
The texture was good for the price, but at first glance, I wondered if the size of the mirror surface was too small. I thought it was small.
Was the installation difficult?
Installation can be done only with Spanner, but before purchasing, check whether the Motorcycle Mirror you have is a Normal Thread Screw or Opposite Thread Screw, and whether the screw diameter is the correct thickness. Check the diameter of the screw carefully.
How was your experience with it?
After installation, the mirror looks like a plating mirror, so it has a custom look. However, when looking at the mirror surface while driving, it is difficult to check the rear because of its small size.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The mirror surface is unexpectedly narrow, and if too much force is applied to change the angle of the Mirror, it feels as if it will break easily (not the mirror surface, but the area around the base).
In my case, I want to prevent corrosion of the plating as much as possible, so before installation, I installed an automatic for-vehicle [Color] I sprayed it with ClearSpray before installation. I am not sure about the durability yet.
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Non genuine but they are ball bearings
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few. Very well made, exact to specifications. Packaging was adequate, shipping was fast. Well done and thank you View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
It was the easiest to grip.
Quantity:Pair (for Left and Right) Purchased at
I have been using CUBs for over 20 years and have used many different grips along with the latest fads, but in the end, the OEM Shape was the easiest to grip.
The price is low, and the thickness is good because it does not interfere with operability.
good point
The rubber quality is moderately soft, so you don't get tired even after long hours of driving.
Contrary to appearances, the thickness of the rubber also reduces vibration.
The shape of the shoes has grooves in the grip area to prevent slipping even if you are wearing gloves.
Cheap.
A bad point
It's not cool. It is for practical use.
I don't think there is a best way to handle it, but in the end, OEM Shape and OEM may be the easiest to handle.
View detail
Fits: SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S), SUZUKI AVENIS 150 (Avenisu), SUZUKI ADDRESS V50 (Address), SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address), SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS (Address), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ)
Great lever to replace a broken one
About quality and texture
After the old lever broke, it was necessary to find a new one, the original one was quite expensive, while the NTB was very much cheaper and at the same time made of the same materials.
The lever is packed in a soft package, completely repeats the original and is made of high-quality aluminum, no shells, sharp edges, etc., excellent performance
About the feeling of use
Installed in place of the original lever in 10 minutes, perfectly fits and repeats all the contours of the original lever, very smooth and well polished, the touch feeling is the same, the tactile material and processing are also identical, so this is one of the best replacements for the original brake levers
Products to buy together
Only the lever is included in the kit, there is no fixing screw
Difficulty of installation
Easy installation in place of a broken lever, replacement is made by unscrewing the screw, removing the old lever and installing a new one
Cost performance and comparison with other products
Very low price with high quality, this is a great copy of the original
About shipping and packaging
Lightweight packaging, comes in a padded bag, was additionally wrapped by Webike to avoid damage
Any concerns, cautions, or advice when purchasing
Always check the compatibility of the part, otherwise this is a great replacement product ------------------------------------- --------------------- About Quality and Texture After the old lever broke down, it was necessary to find a new one, the original was worth quite expensive while NTB was very cheaper and at the same time made of the same materials The lever is packed in soft packaging, fully repeats the original and is made of high -quality aluminum, no shells, sharp faces and the like, excellent performance About the Feeling of Use It is installed instead of the original lever in 10 minutes, perfectly suits and repeats all the contours of the original lever, very smooth and well-polished, the sensations of pressing the same, tactile material and processing are also identical, so this is one of the best substitutes for the original brake levers Products to Buy Together Only a lever is supplied in the kit, there is no fastener Difficulty of Installation Easy installation i nstead of a broken lever, replacement is carried out by unscrewing the screw, removing the old river and installing the new COST Performance and Comparison with Other Products Very low price with high quality, this is a great copy of the original ABOUT SHIPPing and PACKAGING Light packaging, comes in a soft bag, was additionally packed by Webike to avoid damage Any Concerns, Countions, Or Advice When Purchacing Always check the compatibility of the part, otherwise it is a perfectly suitable product for replacing Powered by Google Translator
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250 RALLY Type LD <ABS, HONDA CRF250 RALLY Type LD <ABS, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA CRF250M, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX Special Edition, HONDA PCX150
It is blurred at metropolitan highway speeds.
I was standing up and fell against a wall and cracked the Mirror. I bought this because it was cheap, but at street speeds, I can confirm that the motorcycle or car behind me is not one of the policed types, but at highway speeds, it is blurry and impossible to confirm the type of car. However, at the speed of the metropolitan highway, it is impossible to confirm the type of car because of the blurring. Therefore, a slight touch will change the direction of Mirror. I should have bought OEM Mirror even if it is expensive. (I managed to get OEM Mirror on the other side, and it is not blurry, so I can confirm that OEM Product is great Large)
It seems that I can take a countermeasure to put something on the Mirror's mounting axis, but it is a pain in the ass, so I am enjoying the shaky Mirror as it is.
View detail
Fits: HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Installed.
[How is it used?
Town ride
Was the installation difficult?
It's easy
How was your experience with it?
The quality is the same as OEMs.
[Was there anything that disappointed you?
OEM is a few millimeters longer on the Axel side, but this is Quantity:Pair (for Left and Right) Since it's an even etc.
A small gap will appear.
Other items that would be helpful
Rubber has no stickiness and the quality of the product is satisfactory.
View detail