Reviews
Fits: HONDA CB1100F, HONDA CB900F, HONDA CB750F
Watch out for small parts.
First of all, when you take it out of the box, there is an E-shaped Snap ring in a small bag, so you might lose it if you open the bag carelessly. I found the Snap ring in the Instruction Manual, and found it lying at my feet.
Next, in the Instruction Manual, the footpeg is removed and the U-shaped plate is fixed with a bolt, but there is a small ball on the footpeg and a spring holding it down, so the ball will fly off with the spring if it is not removed carefully.
When putting the footpeg back in, there is a plate between the U-shaped footpeg and the footpeg, so the footpeg and the plate sandwich the spring and the ball between the footpeg and the ball and hold it down to some extent while inserting the footpeg.
View detail
Good stuff
I think Parenthesis is a great way to tighten up the look of the product.
The machining accuracy is also high and EXACTLY determined.
View detail
Anyway, Cool!
Anyway, Cool!
Maverick to Nitro.
I fell in love with the look of this grenade, not Conical.
Sound quality and volume are both fine! I don't use it. (Lol)
If I may say so, it is very expensive! 100,000 yen for a Silencer Only is very brave.
But after installing it, I am satisfied with the Total and Large change.
View detail
It's a nitro Band for a nitro Silencer.
It's Nitro's Silencer, so it's Nitro's Silencer band.
Most of them come with Silencer, but Nitro is sold with Band separately. (Lol)
Size is also Exactly!
I think the price is a little high for Band.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11
Just for the looks
Bought the Over racing slave cylinder so I figured while in roam I may as well add this just to complete the total aftermarket look using high end parts. The Over racing slave cylinder fit pretty well in the Nitro racing clutch release plate, just a few passes with a file on the inside of the plate to get all the hardware lined up for installation; not a big problem or a deal breaker for me when dealing with aftermarket parts no matter who makes them. View detail
Fits: KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX, KAWASAKI ZZR1100/ZX-11
Satisfied with increased custom feeling
It has a visual effect, it gives a more custom look, and it is a good parenthesis. I think it is lighter than OEMCover in terms of performance. Maybe.
As for installation, it is relatively easy since it is just a replacement for the OEMCover.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
NITRO RACING
I ordered Type 2 but received Type 1 with a Type 2 sticker on it. I think NITRO RACING shipped the wrong product and they took care of it. View detail
5 month wait
It took 5 months from the time I ordered.
The exit was not Parenthesis, so it was removed.
Maverick's Inner silencer was installed.
The volume is just right, not too loud and not too quiet.
Silencer mounting band to be attached at the rear
Willie Exhaust Bracket with 6cm Extension Bracket
I am satisfied with the color match with Exhaust pipeKFACTORY.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
Nitro Racing
Another fine product that I can highly recommend from Nitro Racing, build quality is perfect as is fitment to the bike, very quick delivery from Webike Japan as usual, highly recommended AAA View detail
Fits: KAWASAKI ZRX1100, YAMAHA XJR1300, YAMAHA XJR1200, SUZUKI GSX-R750, SUZUKI GSX-R1100, KAWASAKI ZEPHYR1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200, KAWASAKI ZZR1100/ZX-11
Stubby
It looks so much better and I am Large satisfied! View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R, KAWASAKI Z1
Parenthesis is good!
There are various Manufactures and shapes of Screen, but we chose this product considering its appearance.
Compared to the Z1-ROEMScreen currently in use, the OEM Product is more windproof.
OEMScreen is a little agitated in the normal riding position? The OEMScreen is a little agitated in the normal riding position, but this Screen has less wind protection effect unless you get it down a little. However, compared to the OEM shape, the low forme is very cool.
The product is wrapped in PetitPetit to prevent scratches and comes with a NITRO RACING Sticker.
I am very satisfied with the quality, shape, packaging, etc., but I think the price is a little high.
View detail
Fits: KAWASAKI Z1, KAWASAKI Mk2, KAWASAKI GPZ1100F, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R
In case of emergency.
I had a little trouble getting the shaft through, but I was able to adjust the Engine position with Jack and managed to install it.
I would like to ride Motorcycle without forgetting to drive safely, although I feel safe with the Engine slider.
View detail
I'm pretty happy with it
The texture is excellent.
GPZ900R requires Small work such as attaching Spacer to Bolt.
View detail
sense of luxury
I think many people are bothered by the high price, even more so because it is a part of the OEM that is not a problem.
The difference is still a definite increase in the sense of luxury.
However, the Blinker position moves downward, but I have to admit that it is uncomfortable.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
Refreshing
I bought the OHLINS Bracket because it was cheap and I was concerned about it getting caught in the Side cover.
It fits nicely under the Frame and looks great.
View detail
fine quality
It is my personal regret that the Blinker Bracket that comes with the unit makes the Blinker position a delicate position depending on the installation.
Light brackets are installed over OEM parts. It is easy to install and gives a much better atmosphere.
View detail
NITRO RACING
I thought about buying a regular spring at a motorcycle parts store, but I have the expensive Nitro Racing Exhaust System installed, so I bought this spring along with the silicon tube. I am sure it will work. View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Nitro racing makes great parts
This brace fit perfectly on my ohlins forks. The anodizing is also beautiful. One of my favorite accessories. Very lightweight. Perfect machining. It also shipped out quickly. View detail
Silencer and Joint
It has been 6 years since the last replacement and the Exhaust System was replaced while painting the Exhaust System.:I think Stainless Steel ones are good. I am not sure if it is effective in preventing rust, but I use it with silicon spray. View detail
Unable to install...
It was delivered as an exclusive product for NITRO RACING's Down tube kit Type-3 for GPZ900R, but when installed with the supplied bracket, the installation angle of the pipe for the hose outlet on the CoreRight Side is not correct and it hits the frame. View detail