Reviews
Fits: HONDA CB1100F, HONDA CB900F, HONDA CB750F
Watch out for small parts.
First of all, when you take it out of the box, there is an E-shaped Snap ring in a small bag, so you might lose it if you open the bag carelessly. I found the Snap ring in the Instruction Manual, and found it lying at my feet.
Next, in the Instruction Manual, the footpeg is removed and the U-shaped plate is fixed with a bolt, but there is a small ball on the footpeg and a spring holding it down, so the ball will fly off with the spring if it is not removed carefully.
When putting the footpeg back in, there is a plate between the U-shaped footpeg and the footpeg, so the footpeg and the plate sandwich the spring and the ball between the footpeg and the ball and hold it down to some extent while inserting the footpeg.
View detail
Anyway, Cool!
Anyway, Cool!
Maverick to Nitro.
I fell in love with the look of this grenade, not Conical.
Sound quality and volume are both fine! I don't use it. (Lol)
If I may say so, it is very expensive! 100,000 yen for a Silencer Only is very brave.
But after installing it, I am satisfied with the Total and Large change.
View detail
It's a nitro Band for a nitro Silencer.
It's Nitro's Silencer, so it's Nitro's Silencer band.
Most of them come with Silencer, but Nitro is sold with Band separately. (Lol)
Size is also Exactly!
I think the price is a little high for Band.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
NITRO RACING
I ordered Type 2 but received Type 1 with a Type 2 sticker on it. I think NITRO RACING shipped the wrong product and they took care of it. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R, KAWASAKI Z1
Parenthesis is good!
There are various Manufactures and shapes of Screen, but we chose this product considering its appearance.
Compared to the Z1-ROEMScreen currently in use, the OEM Product is more windproof.
OEMScreen is a little agitated in the normal riding position? The OEMScreen is a little agitated in the normal riding position, but this Screen has less wind protection effect unless you get it down a little. However, compared to the OEM shape, the low forme is very cool.
The product is wrapped in PetitPetit to prevent scratches and comes with a NITRO RACING Sticker.
I am very satisfied with the quality, shape, packaging, etc., but I think the price is a little high.
View detail
sense of luxury
I think many people are bothered by the high price, even more so because it is a part of the OEM that is not a problem.
The difference is still a definite increase in the sense of luxury.
However, the Blinker position moves downward, but I have to admit that it is uncomfortable.
View detail
fine quality
It is my personal regret that the Blinker Bracket that comes with the unit makes the Blinker position a delicate position depending on the installation.
Light brackets are installed over OEM parts. It is easy to install and gives a much better atmosphere.
View detail
Silencer and Joint
It has been 6 years since the last replacement and the Exhaust System was replaced while painting the Exhaust System.:I think Stainless Steel ones are good. I am not sure if it is effective in preventing rust, but I use it with silicon spray. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R
just in case
I bought this in case of a fall.
The Engine Mounting Bolt must be removed for installation, so it must be supported from below by a jack or something similar.
I think it would be safe to ask Shop
In my case, I like the Normal look and it took me a long time to cut the Under Cowl!
Quality is adequate, Bolt is a bit cheap
It is similar to those made by DAYTONA, so if you want to make a statement, you might want to choose Babyface, Striker, etc.
One word of caution.
Quantity:Pair (for Left and Right) The length of the bolt of the "Bolt" is different from the length of the "Bolt" of the "Bolt".
There is no Instruction Manual.
View detail
Detail Up
The NORMAL Headlight Bracket was tasteless with a steel plate launch and I wanted to improve it.
I had given up on other companies' products because the entire mount part had to be replaced, which was both time-consuming and costly.
Installation requires removing the entire headlight unit and gapping the optical axis, which is a considerable hassle.
Weight is Quantity:Pair (for Left and Right) and weighs about 300g.
After installation, the car looks like a car with external stems, and we are satisfied with the Large change.
This is better than products that replace the entire mount, but we felt that 50,000 yenOver was too expensive for this.
View detail
Fits: HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F
Easy to install, but..
I found this product rather easy to install and it worked nicely as intended but it's a bit weird that this part had to be ordered separately and it didn't come as a whole package with the adjustable rearsets. View detail
Fits: Others
Good product
That's what NITRO RACING is all about.
The price is high but the construction is very good.
I like that I can specify the color to my liking.
View detail
Fits: SUZUKI GSX-R750, KAWASAKI ZZR1100/ZX-11, SUZUKI GSX-R1100, KAWASAKI ZEPHYR1100, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11
Stabilizer for NITRO RACING OHLINS upright fork
Corner is so much easier now. It looks good too. View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
Satisfied
It's just expensive and the finish and look is awesome!
The sound is also a blast, but Parenthesis is good
Rear Sets cannot be installed unless they are replaced with the Rear Sets, but they can be used as a dedicated NITRO RACING I think it will be attached even if it is not Rear Sets
I'm looking forward to seeing what the browning color will be since it's Titaniumium full exhaust
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR)
Is Stylishness Ichiban?
Mounting in Z1000mk2. Compared to products of other companies, it is cool and cool. Regarding performance, I do not want to experience it...
If Moriwaki and Slider Lineup for Z are available, I would like that, but as far as I am watching TOT I think that people who are using it so much are probably OK. (It is something that Sanctuary made)
I do not care, but at the time of high-speed touring, something will come in just the right position to throw my legs forward.
View detail
Stylish and beautiful Sound
Mounting on CB 400 SF SPEC 2.
Since YOSHIMURA's Exhaust pipe was attached, adjustment of the direction of Exhaust pipe was adjusted.
As for the insertion diameter, Adapter can be purchased with Option, so 60. If it is within 5 Φ you can purchase with the specified diameter.
You can purchase with confidence in the Exhaust pipe of other Manufacturer.
Titanium welding is very beautiful, I think that quality is the highest class.
Baffle is sold separately, but it is not used.
The sound wipes cleanly as you insert the bass firmly and raise the rotation.
There was no sound cracking when raising the rotation to wipe cleanly on the characteristics of the CB Engine.
Because I changed the Exhaust pipe, I got a litter class sound even at CB 400 SF.
It looks very light and there is a Stylish than when I installed a Silencer with a standard shape.
There is no dissatisfaction than the above and I am extremely satisfied..
View detail
Large I'm strange.
Since my footpeg of Motorcycle was a competitor's product, I installed it using Spacer. Therefore I was evaluated as Large strange regarding the installation. If it is the company's Manufacturer's Rear Sets you can install it with Bolt-on. Parenthesis look better also after installation. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R
It became indebted (Lol)
I used it at the GPZ 900 R and overturned Large at Circuit.
NINJA became the installation of the engine hanger part, and this part was loaded, so I heard that it is better to avoid this type of Slider. As a result, there is no problem with Frame. More than half of the Slider was scraped off, and the mounting Bolt for installation bent. Seat has gone far away, Rider (Me) Is the rib Quantity : 2 pc fracture (Lol). However, the damage of the car body was surprisingly slightly minor, as it shaved Blinker and Mirror, Steering tip. On the day I leave Machine, I can return home on self-propelled pick up at a later date. I immediately thought about making Slider a brand new, but Mount Bolt crooked and chewed and it will not come out. I could not do anything by themselves, I went to the AC Sanctuary and exchanged (LOL)
View detail
Fits: KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z2 (750RS/Z750FOUR)
NITRO RACING Racing Screen Z1-R
It changed from Screen of Normal look to this item this time.
The color is Smoke. It is a glossy Smoke that seems to be good transmittance.
Until now, when I closed my body with Circuit, I saw the scenery through Screen, but this screen will make you see from the top of Screen.
NORMAL 's blowjob is about the top of Helmet, whereas Screen here seems to be about the border where the neck hits the wind.
I like the style well..
View detail
Though controversial, I prefer this racing screen than a big head one.This is the only product that I am happy with purchase.Installation is difficult a little bit as the 2 screw holes of the upper light are out of position.I managed to fix it
Though controversial, I prefer this racing screen than a big head one.
This is the only product that I am happy with purchase.
Installation is difficult a little bit as the 2 screw holes of the upper light are out of position.
I managed to fix it, but I do not think that the problem is only my product.
I guess that MOA Inc. screens are more precise.
And dust will be visible as it is all clear if the mounting (rubber) part becomes dusty.
This would not be so if it is a smoke type...
View detail