Reviews
Fits: Others
Stable items
There was only a firm Manufacturer feeling the feeling of feeling and feeling Fit when wearing very well.
I feel the height of rigidity even if actually used.
This time, I bought the opportunity to buy the used Motorcycle in second hand and Lever became old, so I was looking for something similar.
I made it better than the previous ones, but I was glad if you increased the selection width of Dial to adjust by about one more step. Currently I am using the first of Memory ....
View detail
Fits: その他
Looks good!
Nissin 1 when making the ape into a disc / I bought it for 2 masters. Because it is a mini bike, the clutch lever is about the length of this short lever, so I changed it to short, but it looks satisfying. It became about the same as the clutch lever and balanced between left and right. However, I did not think that the feeling of the brake will change so far. The brake does not work unless it grips strongly so I personally became difficult to use. Rather than the lever is far away. Even if you make the adjustment closest to you, it is still far.. It is four-stage adjustment. By the way, the normal length lever is a five-stage adjustment. This is not that far.. I am now returning to a long normal guy. Conclusion. I did not suit my body! Lever is not bad. View detail
Fits: Others
Short lever for NISSIN Radial master cylinder
I attached the NISSIN Radial master cylinder, but it was attached to the vehicle which was previously listed by OEM, but at that time I did not mind, but in this vehicle Lever was too long and it was hard to grasp. It became easy to grasp considerably in place of Short lever.
View detail
Fits: その他
Recommended for people with short fingers
Because my finger is shorter than general men, I chose this Short lever.
The replacement is to remove the Bolt nut as a fulcrum and to replace it with this Lever, but do not forget to apply Grease in that case.
From StandardLever, it makes it easier to apply Lever and Brake seems to be well-liked.
It is also recommended for small women in hands.
View detail
Fits: その他
It was different from Kawasaki OEM Radial master!
I purchased it as though it was the same as Kawasaki's OEM Radial master.
Clearly it was my thought.
In comparison, the shape of MASTERBody was slightly different here and there.
If you divert OEMMASTER, please purchase for OEMLever.
By the way, to KITACO for OEMLever (Other Company Product) It was Lineup.
View detail
Fits: Others
It became easy to grasp with Short lever!
In terms of the arrangement of MASTER, I held the Right Side a little bit more than the center of Lever, and I felt there was no sense of Fit hitting Ball's finger at the tip of Lever. However, after making this Short lever, it took a firm finger on the Ball at the end of Lever, it became easy to grasp very much! Brake 's handedness does not change, but its operability has improved dramatically and it is very satisfying.
However, the price is a bit high. It will be great if it is a little cheaper.
View detail
Fits: その他
Quality is not a problem - - - -.
Since NORMAL's Length protrudes from Handlebar End, it is purchased to be Short..
Quality, performance is no problem.
But,
Price of NORMALLever <Price of Short lever
Short lever is more expensive. Although I thought why it was short, I guess that it would be expensive as demand is low,
At this price, a price hesitates to prepare Spare lever.
I made it to three stars with expectation that it would be as price as OEMLever.
View detail
Fits: Others
NISSINNisshin 【NISSIN Master Cylinder repair
I bought it with RetroMaster cylinder.
It is a product of NISSIN so it can be used without any problem.
I can also recommend it as for Repair because the details are well built..
Only Black or Buff clear has Color, so I thought it would be nice if you could prepare Plating.
View detail
Fits: その他
In the standard Brake lever of the Nisshin MASTER, since it hit a Hand guard, it exchanged for the Short lever. It is the touch grasped with two fingers in the grasped touch. the Kawasaki -- it is the same in it being pure, and a price is too h
In the standard Brake lever of the Nisshin MASTER, since it hit a Hand guard, it exchanged for the Short lever.
It is the touch grasped with two fingers in the grasped touch.
the
Kawasaki -- it is the same in it being pure, and a price is too high although the Lever was only short-circuiting.
It was purchase without the goods suitable for
etc. which comes out and comes out reluctantly (>_
View detail
Fits: その他
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in maintenance, it decided to do Repair of. Since I am using the same product for about ten years or more, it is not uncomfortable. When ther
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in
maintenance, it decided to do
Repair of.
Since I am using the same product for about ten years or more, it is not uncomfortable.
When there was a Billet type in the
said form, he thought whether it could be dressed up, but since the familiar thing is first, the
operation system continues to purchase the product.
Although it is hard to treat it, since a little
regulation Dial is not used during a run, it has no
demerit mark.
View detail
Fits: その他
A Lever also likes the same Black as a Grip and it has equipped with this Lever. There is a sense of togetherness and it can assert touch different from others. The Dial which adjusts hardness is also attached and the function surface is also ex
A Lever also likes the same Black as a Grip and it has equipped with this Lever.
There is a
sense of togetherness and it can assert touch different from others.
The Dial which adjusts
hardness is also attached and the function surface is also excellent.
It has taken care and ridden so that
fall may be carried out and it may not bend.
View detail
Fits: Others
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking. This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking.
This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a Sports.
It takes care and values so that it may not fall.
View detail
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one.
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one. View detail
Fits: Others
The same Brake lever was used until it fell. It is good good to be able to carry out the point Dial adjustment. Since it has the structure where the direction of the point of a Brake breaks, at the time of fall, even if it b
The same Brake lever was used until it fell.
It is good good to be able to carry out the point
Dial adjustment.
Since it has the structure where the direction of the point of a Brake breaks, at the time of
fall, even if it breaks, it can run somehow.
--
-- a bad point --
-- the kana which is slightly too high for me.
View detail
Fits: その他
It fell automatically under the influence of the typhoon No. 15 during parking, and since the brake lever had broken, it purchased. The reason made the short thinks kana with a somehow sufficient parenthesis -- Although the grasped touch turned in
It fell automatically under the influence of the typhoon No. 15 during parking, and since the brake lever had broken, it purchased.
The reason made the short thinks kana with a somehow sufficient parenthesis --
Although the grasped touch turned into touch that an end was caught in a little finger, since the difference from normal has individual difference, it cannot say not at all.
although it is over by such little power that a brake lever is pulled in a lever end piece when standard -- the part of a short -- being mere -- power is somewhat required -- it is -- I consider.
Since it grasped, and it was crowded and admiration changed very much the start of use, practice was required.
I think whether since the number of adjustment mechanisms was four, there may be 6~8 steps of adjustments.
View detail
Fits: その他
Since the standard lever of the NISSIN master was too long for my vehicles, it purchased on them. In die length, although about 2 cm of tips of a lever are inside from the end of a grip, he likes that kind of one individually. Since the clearing w
Since the standard lever of the NISSIN master was too long for my vehicles, it purchased on them.
In die length, although about 2 cm of tips of a lever are inside from the end of a grip, he likes that kind of one individually.
Since the clearing work itself has only stopped with one bolt, it does not start with 5 minutes of a thing.
View detail
Fits: その他
Since the tip of the lever jumped out from grip end to KSR when it was a lever of normal, it exchanged for the short lever. I think that the balance of die length is right just. I think that anyone can do it since exchange has only stopped with on
Since the tip of the lever jumped out from grip end to KSR when it was a lever of normal, it exchanged for the short lever.
I think that the balance of die length is right just.
I think that anyone can do it since exchange has only stopped with one bolt.
View detail