Reviews
Fits: その他
Recommended for people with short fingers
Because my finger is shorter than general men, I chose this Short lever.
The replacement is to remove the Bolt nut as a fulcrum and to replace it with this Lever, but do not forget to apply Grease in that case.
From StandardLever, it makes it easier to apply Lever and Brake seems to be well-liked.
It is also recommended for small women in hands.
View detail
Mirror has gone up.
I bought it for installing Kawasaki OEM Radial master.
I could install it without any problems, but because the installation position of Mirror changed and I attached the Opposite Thread Screw Adapter for Yamaha OEMMirror, the Mirror of Right has come to protrude upward.
I think that attention is necessary when attaching Yamaha OEMMirror.
View detail
Fits: その他
It was different from Kawasaki OEM Radial master!
I purchased it as though it was the same as Kawasaki's OEM Radial master.
Clearly it was my thought.
In comparison, the shape of MASTERBody was slightly different here and there.
If you divert OEMMASTER, please purchase for OEMLever.
By the way, to KITACO for OEMLever (Other Company Product) It was Lineup.
View detail
Screw hole position changed with round bar file !!
I bought it to install Mirror on Left.
Position of Screw hole slightly different from Clutch lever side (About 2 mm) So I changed the Screw hole position with round bar file and changed it.
View detail
Mirror is Quantity : Pair (for Left and Right) Symmetrically!
Mirror installation position is Quantity : Pair (for Left and Right) I thought that it would be symmetrical and purchased.
When looking at it, there is less reflection of shoulder, you can check backwards without discomfort! I am satisfied.
Slightly higher Left Side but it is acceptable range.
View detail
Repair Parts
It is purchase when purchasing MASTER of semi radius.
As a result, Cliamp with Mirror hole in semi radiator MASTER is also
I did not use it because it was included.
I think that there is no problem on the product.
View detail
Fits: Others
It became easy to grasp with Short lever!
In terms of the arrangement of MASTER, I held the Right Side a little bit more than the center of Lever, and I felt there was no sense of Fit hitting Ball's finger at the tip of Lever. However, after making this Short lever, it took a firm finger on the Ball at the end of Lever, it became easy to grasp very much! Brake 's handedness does not change, but its operability has improved dramatically and it is very satisfying.
However, the price is a bit high. It will be great if it is a little cheaper.
View detail
Because it was MASTER you got second hand ...
【What made you decide the purchase?】
Because I wanted to match the color with the need of Mirror Holder.
【How was it actually used?】
Because it is a part that I do not have the choice, I am satisfied with OEM? Repair Parts.
【Was it difficult to install? (Hard parts case)】
It is not difficult because it is only tightening the Bolt of the M8.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since it is also the part that determines the fixed position of the operation Lever, it is necessary to position it towards the user.
At that time, positioning with Bolt on top, fastening with specified Torque, followed by Bolt below is concluded with Torque.
[Is there anything I was disappointed about?]
It's a part I do not have the choice ... I felt a little expensive.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because it is out as Repair Parts, I'm happy that selling Cost will go down a little more.
Although it is not said that it is half price, it is saved if thousand yen is fixed price base.
【Have you compared items?】
There is none.
Or, since I was using Silver before ProductNo, I wanted to match the colors anyway.
[Others]
Of course, this part was attached to the Master cylinder you got second hand, but there was no Mirror Holder, so Bracket of Reserve tank could not be installed.
As we were seeking fixing with Mirror Holder, we decided to exchange this by using this Silver.
However, it will be tight if the colors match.
View detail
Fits: その他
Quality is not a problem - - - -.
Since NORMAL's Length protrudes from Handlebar End, it is purchased to be Short..
Quality, performance is no problem.
But,
Price of NORMALLever <Price of Short lever
Short lever is more expensive. Although I thought why it was short, I guess that it would be expensive as demand is low,
At this price, a price hesitates to prepare Spare lever.
I made it to three stars with expectation that it would be as price as OEMLever.
View detail
Fits: Others
NISSINNisshin 【NISSIN Master Cylinder repair
I bought it with RetroMaster cylinder.
It is a product of NISSIN so it can be used without any problem.
I can also recommend it as for Repair because the details are well built..
Only Black or Buff clear has Color, so I thought it would be nice if you could prepare Plating.
View detail
Also OEM for Cagiva Grand Caynon 2000. Best price I've found found for this lever. Fast shipping from Japan to US. No problems at all with PayPal transaction. I will be buying all my Nissan parts from these guys!!! The Internet is a great place! The worl
Also OEM for Cagiva Grand Caynon 2000. Best price I've found found for this lever. Fast shipping from Japan to US. No problems at all with PayPal transaction. I will be buying all my Nissan parts from these guys!!! The Internet is a great place! The world is much smaller now. View detail
Fits: その他
In the standard Brake lever of the Nisshin MASTER, since it hit a Hand guard, it exchanged for the Short lever. It is the touch grasped with two fingers in the grasped touch. the Kawasaki -- it is the same in it being pure, and a price is too h
In the standard Brake lever of the Nisshin MASTER, since it hit a Hand guard, it exchanged for the Short lever.
It is the touch grasped with two fingers in the grasped touch.
the
Kawasaki -- it is the same in it being pure, and a price is too high although the Lever was only short-circuiting.
It was purchase without the goods suitable for
etc. which comes out and comes out reluctantly (>_
View detail
[WeBike Monitor] It Bound tight too much and has been divided into two. Special attention is required to a Torque. Since it was its carelessness this time, it is unavoidable. It was not bad at all in product, and carried out. It is a Recommen
[WeBike Monitor] It
Bound tight too much and has been divided into two.
Special attention is required to a Torque.
Since it was its carelessness this time, it is unavoidable.
It was not bad at all in
product, and carried out.
It is a Recommendation at the Accent of the circumference of the
Handle.
View detail
It purchased in order to Handle-mirror-ize Ninja1000! Since 1152 was touch as the slightly high kana ? now although the direction besides was written, but there is also no substitute in others and he bought it with bulk purchase 1129 as at a low pric
It purchased in order to Handle-mirror-ize Ninja1000! Since 1152 was touch as the slightly high kana ? now although the direction besides
was written, but there is also no substitute in others and he bought it with bulk purchase 1129 as at a low price as possible, it is the good kana!?
View detail
Fits: その他
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in maintenance, it decided to do Repair of. Since I am using the same product for about ten years or more, it is not uncomfortable. When ther
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in
maintenance, it decided to do
Repair of.
Since I am using the same product for about ten years or more, it is not uncomfortable.
When there was a Billet type in the
said form, he thought whether it could be dressed up, but since the familiar thing is first, the
operation system continues to purchase the product.
Although it is hard to treat it, since a little
regulation Dial is not used during a run, it has no
demerit mark.
View detail
I found it ! i search more times for this levers and i found it ! i'm happy ;) Levers fully good and best quality for me. TNX ! my V-max happy too :)
I found it ! i search more times for this levers and i found it ! i'm happy ;) Levers fully good and best quality for me. TNX ! my V-max happy too :) View detail
Fits: その他
A Lever also likes the same Black as a Grip and it has equipped with this Lever. There is a sense of togetherness and it can assert touch different from others. The Dial which adjusts hardness is also attached and the function surface is also ex
A Lever also likes the same Black as a Grip and it has equipped with this Lever.
There is a
sense of togetherness and it can assert touch different from others.
The Dial which adjusts
hardness is also attached and the function surface is also excellent.
It has taken care and ridden so that
fall may be carried out and it may not bend.
View detail
Fits: Others
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking. This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking.
This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a Sports.
It takes care and values so that it may not fall.
View detail
[Webike Monitor] It is not for Mirror attachment this time [ ], Jupiter It purchased in order to transfer the Control switch for Navigations to the position nearer to the thumb using Tech-mount ZZZ-0257 and GALE SPEED Tank-stay Type4 for the improv
[Webike Monitor] It is not for Mirror attachment this time [
],
Jupiter It purchased in order to transfer the Control switch for Navigations to the position nearer to the thumb using Tech-mount ZZZ-0257 and GALE SPEED Tank-stay Type4 for the improvement in operativity.
Since it was not able to move to the position which considered though it was regrettable, it is not used.
View detail
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one.
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one. View detail