Reviews
Perfect bolt-on side stand for NQ50 Spree
This side stand was easy to mount, and fit perfectly! It is exactly what you need if you AF-16 swap your honda spree! View detail
Perfect bolt-on side stand for SA50 Elite
This side stand is a perfect bolt-on solution to get rid of the center stand on your SA50 elite. The perfect side stand if you don't own a welder as it feels solid / secure when mounted. View detail
Stability is improved.
When I loaded the AA04 with luggage, it seemed to fall over when I hung the Side Stand on it, and I was worried about its stability, so I installed it.
The product itself is heavy and solidly built, so durability is not a problem.
Installation takes about 10 minutes if you have the right tools.
View detail
Side stand for elite s
Love side stand it is away from my after market exhaust Can make sharper turns without my stock stand hitting the ground and is just easier to use then the stock one. View detail
In fact, it is resistant to earthquakes.
Crack appeared on the OEM Side Stand, so I replaced it.
In the event of an earthquake, I still prefer the Side Stand, because the Center Stand would fall over.
Replacement is easy:simply stand the Center Stand upright, level the vehicle body, and replace the existing Side Stand.
good point
The ●STAND foot is solid, so we can expect it to be durable.
JAPAN in trust.
The Spring part is also solid.
● Since the replacement, there have been several earthquakes, but no problems at all. Don't forget the single speed and Handlebar Lock.
You don't have to experience it, but if you experience an earthquake, you will think that the Side Stand is effective in preventing your motorcycle from falling over. I had no problem even with an earthquake of intensity 6.
View detail
I highly recommend it!
SUPER CUB110 (JA07) I installed it in
I didn't have any complaints about the OEMSTAND when I was riding normally However, when I put the Box on the back of the bed and put the load in and it got heavy in the back, the OEMSTAND made me feel stable I was a little worried about the
Then, it was Mr. NISHIMOTO's Side Stand that I found The grounding surface is obviously larger than the installation surface of the OEM STAND There's no doubt about it! I decided to install it right away, partly because I wanted to do a custom CUB for now (laughs)
The NISHIMOTO's side stand is much better than the OEM's side stand The ground contact surface is very large, and the foot part is thick and secure It can be installed on the motorcycle with Pivot of Swing Arm It is very stable and comfortable to use even with a big load on
But the only thing that bothers me is that, as others have written, Rubber, which was on the OEM It will disappear So, if you forget to store it, it will be directly against the ground and it will be quite a shock I'm a little worried about it because it's co-occupied with the Swing Arm Pivot
Also, the ground surface is designed to be large, so that when the vehicle is banked to be large, the OEMs will be able to use it for a longer period of time It's easier to scrub
But even with those, I think there is a Merit to install
If you're going to be carrying a heavy load like I am, I'd recommend it in OEM condition bodywork as well!
View detail
It's a sturdy structure
Most of the other stands are small in foot area, but this side stand is Large You can feel safe even if the parking lot is dirt or small stones The rear shock is 25mm down, but it is Large strong Because the flat washer to put in the long shaft is not attached, I used my own washer View detail
Very stable
This is PetitCustom by LITTLE CUB It's affordable and has significantly improved performance It's well built and easy to install I recommend it! View detail
Side stand
Finish plating I bought this side stand for the great deterioration of my,the time that utilized show good resistance for a long life useful View detail
Fits: YAMAHA JOGCHAMP (27V|54V|55T|IJK|I), YAMAHA CHAMP CJ802GM, YAMAHA CHAMP Common
Side Stand
CHAMPrs Rear wheel 3. When I was wearing a 50 - 10 size I could not drive as it was Center Stand, so Side StandSpec. I bought this item to make it. I think it is a very good STAND but I think the STAND is short even if I do not Size up Reire's Tire ...
View detail
Thanks Webike! I ordered a side stand part for my American SA50P 1994 Honda elite 50cc scooter. I had read that you guys were the right source for the part but was very nervous as the picture does not match the part! NK-127 has the loop to grab on
Thanks Webike! I ordered a side stand part for my American SA50P 1994 Honda elite 50cc scooter. I had read that you guys were the right source for the part but was very nervous as the picture does not match the part! NK-127 has the loop to grab onto the SA50P frame and fits absolutely perfectly. It took me only 20 minutes to remove the standard Honda kickstand and install this one. Fits perfectly - looks and acts perfect! Great addition - wife loves not having to pull the bike onto the stand! Tom View detail
Giorno AF24 was equipped. Since the rear box was attached and it was very serious to have applied a center stand with a carrier, it opted for purchase. Since a few will surely once be pulled back in the case of a center stand, it is difficult in t
Giorno AF24 was equipped.
Since the rear box was attached and it was very serious to have applied a center stand with a carrier, it opted for purchase.
Since a few will surely once be pulled back in the case of a center stand, it is difficult in the parking area (smile) which became easier than imagination to stop at back, but it is easy.
It has stopped using a center stand thoroughly except [ maintenance ] the time.
Attachment is also easy and it is recommended!!
View detail
Fits: HONDA Live Dio mom, HONDA Live Dio Cesta, HONDA LIVE DIO, HONDA LIVE DIO J AF35 (7.2PS), HONDA LIVE DIO J AF35 (6.3PS), HONDA LIVE DIO J AF35 (5.6PS), HONDA LIVE DIO J AF34 SR|ZS|ST|ZX|J Vehicles that comply with exhaust gas regulations, HONDA LIVE DIO J AF34 (7.0PS), HONDA LIVE DIO J AF34 (5.7PS), HONDA New LIVE DIO
I am using it for the live broadcasting DIO. Although processing of a side cover is needed for attachment to DIO, it is processible in about 10 minutes using an attached saw. Since the lowdown of RIA was carried out, the purchase of the short type
I am using it for the live broadcasting DIO.
Although processing of a side cover is needed for attachment to DIO, it is processible in about 10 minutes using an attached saw.
Since the lowdown of RIA was carried out, the purchase of the short type stand was also considered, but in my case, it was satisfactory in the usual side stands.
It is RAKU that can save the time and effort which uses a center stand in the case of parking more than imagination.
It is a recommend!
View detail