Reviews
NHKSteering Damper MONKEY88cc
I was running 75cc without Steering Damper at first, but I was afraid to ride because of the swelling of the handlebar after 50km. "Reliable" I did View detail
Fits: HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA
Stable cruising
As MONKEY's Engine custom progresses
Power will be
Then when you get some Speed out of it.
Handlebar is starting to swing out. (In the case of my MONKEY) 。
This is where the Stealing Damper comes in.
NHK when I was riding my past mid-size Motorcycle.
I trusted Damper because it worked so well.
After installation, I immediately ran a test run and found that the handlebar did not run out of alignment.
It subsided beautifully, and we were able to patrol the streets comfortably and safely.
You can now
View detail
Seems like a necessity.
I purchased this product to prevent the Stain- phenomenon, but the effect is very large.
Handlebar is also much less heavy than I expected.
Slight modification to the Fuel PumpCover is required for installation.
View detail
NHK Damper
I bought this to install on my Kawasaki Z125 pro. There's no suitable bracket for this bike so, I need to customize it. Stability was immediately noticed once installed. For such a small bike, I need to adjust to the maximum at top speed. Overall, this is a very good damper. View detail
It's great to have all the Size and Shape Variations available!
YZF-R1 (2006) This product was used to replace the Steering Damper connected to the Handlebar Clamp when replacing the Handlebar with an OEM Handlebar for 2009, as the Steering Damper needed to be trimmed.
I bought both A Type and E Type because I wanted to see which one I was comfortable with. As a result, I used the A Type which is considered to have more rigidity of installation, because the body around the screw hole is angular and the clearance is close to other parts of the frame.
The connection part of the steering damper is K-CON KITACOConvenienceParts:0900-093-00057 Aluminum spacer collar (For M8 outer diameter:Φ20×Width:The 15mm is a little long, so I shaved it down to 13mm. As a result, I think I was able to fit them quite Firmly. It looks nice and natural with less of an afterthought.
The ClampBracket of this product has been punched out, and although it looks stylish, the padding is superfluous in terms of functionality. It's better to use it without padding for strength. Also, the screw hole position should be closer to the φ54 hole of Clamp. The details of the design are not the best, but for practical use, it's good enough.
The best part is that the size and shape types are all lined up and you can choose the one that fits your application. I would like to express my gratitude to the manufacturer who has a wide range of products. The function of Steering Damper which changed the clamps to this product is also no problem at all.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA
Installation was a breeze
I'm installing a WPSteering Damper on the GORILLA, so I'm not going to be able to do this one I bought a Steering Damper designated by NHK MONKEY I'd like to say the installation was easy, but I'd like to change the orientation of the mounting bracket once I thought it was a mistake, but I was able to install it right away
The performance of the steering damper body is good, and it has 6 levels of damper strength The only problem is that the damper attachment part can be fixed with a rubber bush Installation accuracy is now 3 points
When you are touring on the main road and follow the flow of the car, the 8Inch of MONKEY will help you to get Gap is a little less scary now
View detail
Beautiful
I installed it on MONKEYAB27-111...
I've installed some parts of the body and fork parts on my car, but I'm not sure if it's a good idea I've never seen Rubber Bush before, but I guess you could say it's a price to pay
I use a small amount of RubberGrease on the Rubber Bush
If you try to use it, you can adjust the Damper in 6 levels, so the WP used for GORILLA It's easier to adjust while running and less nervous than the Damper in the
To install, remove the Tank and install the Bracket and the Front fork as well You can install the Bracket, but if you install it at the wrong angle, you can't use the Bracket It's like a puzzle to the Areale, but it can be installed properly
The MONKEY is 8Inch in use, so if you drive with the flow of the car (Moped type 2 registered) The Gap and Corner at a little over 60k miles Over has eased up a bit
It felt good to install it for now
View detail
it is better to have it than not to have it
Because of the light weight of the vehicle, the front 19-inches, the speed of the vehicle is like a bicycle Handlebar or body? shakes (although the spoke wheel may be the cause of the problem, too)
In the old days, NHK's Damper was so unmovable when he was the strongest, but now the difference between the weakest and strongest is the difference between the weakest and strongest Not much Well, it's true that the strongest is not realistic, so it's not necessary
I like that it's made by NHK and it's cheaper than YSS
View detail
Ordered to try it and it's good to use.
Ordered to shake nhk and came with kawasaki w800, ordered on 17/06/2561, received item on Tuesday 19/06/2018, not long at all. Tax is about 30% of the product price. When installing, look at the instructions that are easy to understand. But be careful, the parts come to fit, not even a spare ring. After the trial installation, the difference was clearly felt. feel more still Unlike at first run fast and not very confident. I do not know what to do with it. Taxes are about 30% of the price. The installation is looking at the instructions are easy to understand. But be careful of the parts to fit, no backup even the ring. Trial installation feels a distinct difference. More calm Unlike first run fast, then not confident.(translated by Google Translator) View detail
good quality product clear delivery status
good quality product clear delivery status It doesn't take long to place an order. There is a process to recommend ordering products that are easy to understand for me to order with webike for the first time. Not as confused as I thought. The flicker is very easy to install. You can do it yourself. according to the instruction manual Use speeds over 120 kph, more confident, not gliding like usual before installation But when ordering, I don't know the exact tax before sending or may not be able to find it myself. Overall, I'm impressed. Good quality Shipping status is clear. Not long in ordering. I have a lot of questions. I do not think that the flicker can be installed very easily can do it. Follow the instructions. The speed is over 120 kph. , more confident not to glide like normal before installation. I do not know the tax value before delivery, or may not find myself. The overall impression is offline.(translated by Google Translator) View detail
Fits like gloves! Horrible manual.
This is one of the best performance upgrade purchase for your W800. It's simple, small, delicate, and doesn't ruin the classic look of your w800. The knob is easily adjustible and can even be done with one hand while riding. The 8 settings are more than enough to stabilize the front end of the bike up to 180kmh. I find that the 5th position is adequate for speed riding. There is only 1 thing that I need to substrate 1 star from which is a very lousy manual. How come a product with such precision comes with the instructions manual that looks like fax quality and barely readable. My inkjet printer does 10 times better job. NHK, please improve! View detail
Fits: HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA
Looking for straight running stability (8Inch)
Since 8 Inch is used, as the speed increases, the ground feeling of the Front becomes suspicious, so install Steering damper. Takegawa's Up Exhaust System makes it impossible for the Handlebar to run out.
I would like to actually use it after exchanging with Down Exhaust System. I think that it is perfect for stabilizing because things are solid and understand the attenuation adjustment.
View detail
Easy to put on.
I think it's a good feeling Ring.................................................. View detail
Slightly recommended
I'm a little unhappy with the price point.
It's not something that comes around very often, so is it any wonder?
The shape and other features are not superfluous
It is simple and easy to install.
Of course, it's the genus Gold and it's hardy.
View detail
There is a little finish Gap, but no problem.
I used it to attach Steering damper to FTR 250. I am removing it now.
I was out of various Manufacturers, but NHK made it the cheapest and it looked so good.
The whole finish is very good, Anodized is also solid and working hard without rust for 4 years
Got it.
Meanwhile, the Steering damper Body is replacing twice with Oil missing and ROD rusting ....
NHK's durability of the steering damper of the heart is not good (Lol)
It is a good product that can be used with confidence without any problems, but there are places where the finishing is sloppy if you look closely.
It is a division type but Quantity : Pair (for Left and Right) The chamfer is different as it seems not being processed at.
Feeling that they are distributing a combination of separately delivered items.
Although Cut-out, finishing around Bolt should be a separate process, there are also tolerances there
"I am Gap" I think that there is an impression called.
My precision does not matter at all in appearance and accuracy, I think that it is extremely rare that Gap is done,
It is a little worrisome.
View detail
Easily
It is easy to install additional Meter. It looks beautiful. It is quite a valid product for the narrowness around SS type Meter! It can firmly fix it unlike Double-sided Tape or Magic tape. View detail
Fits: HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BAJA
The handles weren't stable at medium to high speed. I guess it's because I have 8inch wheels. It's an awesome product with great cost-effectiveness and easy mounting. I mounted it to a large vehicle and as a matter of fact they may be preferable for these
The handles weren't stable at medium to high speed. I guess it's because I have 8inch wheels. It's an awesome product with great cost-effectiveness and easy mounting. I mounted it to a large vehicle and as a matter of fact they may be preferable for these kinds of vehicles. I just might've mistaken the order of mounting.
NHK is a brand you can trust.
View detail
It had equipped with the goods same for the shimmy phenomenon prevention at the time of high speed operation, and Handle blur prevention of the rough road surface in its own car a decade ago. The effect of those days is expected and this model is also eq
It had equipped with the goods same for the shimmy phenomenon prevention at the time of high speed operation, and Handle blur prevention of the rough road surface in its own car a decade ago.
The effect of those days is expected and this model is also equipped.
The rectilinear-propagation stability at the time of high speed operation improves, feels easy also about the asphalt road surface which broke recently the fine concentric fluting and the shape of a tortoise shell of the road surface of many Curves, and also a Flat Dirt, and can run now.
If effectiveness is merely made into a Hard too much, it will become conversely unstable especially at the time of low speed running, but since the span of adjustable range is wide, it is saved.
I was allowed to make evaluation into four star by not having become about
attachment, unless it shifted the handwritten Quality and Tank of the picture of the description.
View detail
[Webike Monitor] It clamped to the Aluminum Roll bar (38 phi) of the car, the Eyebolt was attached to the screw hole (M8), and it was used as a Hook of a Seat belt this time [ ]. The thing of 43 phi was attached to the Fork by V-max before
[Webike Monitor] It clamped to the Aluminum Roll bar (38 phi) of the car, the Eyebolt was attached to the screw hole (M8), and it was used as a Hook of a Seat belt this time [
].
The thing of 43 phi was attached to the Fork by V-max before
, it attached c Mount base for Camera fixation, and used it for fixation of the Camera for animation photography.
The
thickness is about 12 mm, and there is also intensity considerably.
As for the screw thread of
fixation, M6 is 2 and a product made from a STAINLESS STEEL.
I think that it can respond to the Pipe of various thickness since the
Size is also abundant.
View detail
ODM2000 / 3000 racing adapters Purchase I had you weld to a frame directly, and equipped with the steering damper. Unless this adapters existed, it was not able to equip with a steering damper.
ODM2000 / 3000 racing adapters Purchase I had you weld to a frame directly, and equipped with the steering damper.
Unless this adapters existed, it was not able to equip with a steering damper.
View detail