Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Classic color and cool!
I installed it on my JA07SUPER CUB and it looks great with the classic color! And the Yellow Bulb is easy to see even in the rain! I like the durability and the fact that it doesn't break easily! I am very pleased with the durability of the bulb and the fact that it doesn't get damaged easily! View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Punching in as is
As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.
I don't know about durability so far.
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
No problems so far.
I just wanted to White the Light, so this cheap Valve is sufficient. View detail
Fits: Others
LED MeterLamp on TS185E that can be cut immediately
[Usage]
Since the OEM Product's bulb went out after about 1,000 km, we replaced it with this product to reduce the frequency of replacement.
Comparison with OEM Product
OEM (09471-12077-000)
Light intensity:LED diffuses light on the surface, so it looks brighter on a single body, but after attaching to a meter, it is about the same level.
Cost:6.5 times OEM.
(Points to note)
LEDs are polarized, so be careful about the direction of installation.
【attachment】
Easily replaceable by simply plugging it in.
View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
Unseen 25mm
I purchased this as a spare fuse for CUB90.
I don't know if the previous owner skipped it or lost it, but it was not attached. I have installed some external parts for the electrical system, so it may come in handy.
This time Fuse is a Glass tube.
When I checked what I received, Element is thread shaped.
The product description says that the shape of the Bracket varies depending on the time of production. I am not so sure about the shape performance of Element. I think it is good if it can be used normally.
The 7A25mm is also Exactly suitable for Fuse holder. 25mm is not so common, so mail order is a great help.
GlassTube Fuse is a Quantity:After 10 years of use, the connection between the glass and the bracket may become weak due to vibration, and the glass part may start to rotate round and round. This phenomenon is caused by the quantity of the glass in the holder of the Spare fuse.:This is common in Fuses that have been set. It is better to be careful when white corrosion appears on the gold part, although it can be energized.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
LED is still bright
We replaced Halogen with this product.
I feel that there are fewer opportunities to be forcibly interrupted at night than before.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
It is easy to install.
The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Fits: APRILIA SPORTCITY125, SUZUKI GSX-R750, PIAGGIO X9 200, KTM 990SUPER DUKE, KTM 990ADVENTURE, HONDA foresight, HONDA gold wing, HONDA VTR1000SP, HONDA CBR600F, GILERA RUNNER125, GILERA RUNNER125, GILERA RUNNER125, GILERA NEXUS500, APRILIA Scarabeo250, APRILIA Scarabeo400, Vespa 50ET2, Vespa 125ET4, TRIUMPH TIGER EXPLORER, KAWASAKI ZX-6R, SUZUKI GSX1300R Hayabusa
R1 looks more like a deep-sea fish.
[How is it used?
Regarding the OEM Headlight Bulb, I have no practical problem with it, but I purchased it for color matching with the Position bulb.
Was the one you received as per Image?
No problem
Was the installation difficult?
The process is to put the removed part back in place, but it is recommended that you take a picture of the bulb before removing it, as you will not know the orientation of the Bracket that holds the bulb in place.
How was your experience with it?
In comparison with the OEM, the OEM seems to be more luminous, but after replacing both eyes, I felt no particular problem.
It does not correspond to Japanese Vehicle Inspection.
[Included Parts:were they on?
It is a light bulb only, so there is no problem.
[Was there anything that disappointed you?
Since it is a twin-lens light, two are needed, which is a reasonable expense.
Quantity for Binocular Light:I thought it would be easier to purchase if there is 1 Set of 2pcs. for sale.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Necessary and sufficient
Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.
Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.
Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.
The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.
Recommended for those who require ease of installation and reliability due to simple construction.
View detail
SR400 Tail with a modern look
The LED's characteristic sparkling light will also increase visibility. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail