Reviews
Replace from old Type
Purchased to set CIBIELight180Π's Position to T10.
Since the wiring is the same as the original, it was easy to process and fit perfectly into the original Rubber frame.
The texture is not bad, so I think the cosmetics are good.
View detail
Used for Meter certification of CB50JX
The Tachometer lighting on my CB50JX was T6 BA7S, so I bought it to replace the entire socket to convert it to LED.
The Universal T10Wedge Bulb could be used, and the fit was just right, not too tight and not too loose.
Although there are inexpensive Manufacturer unspecified products available in the market, we prioritized reliability.
If possible, a longer pole wire would improve handling and workability.
View detail
Substitution of out-of-print parts
I ride a Kawasaki Eliminator.
When I disassembled it, the Socket part of Valve disintegrated by hydrolysis, and the terminal was broken.
However, this part (23008-1348) Unfortunately, it's out of print, so the only way to get it is through Yahoo! Japan, but there is no such thing as only this part being sold on Pinpoint, and I was having trouble repairing it.
So I bought this Wedge socket and tried to install it in combination with the collapsed Socket, and Exactly!
The shape of the Coupler is completely different from the OEM, so it must be purchased separately, but it is a strong ally for out-of-print electrical components.
View detail
One of the few options for processing T5Wedge Bulb
Used in the conversion of a CUB meter to T5Meter Bulb LED
Originally, CUB's MeterWedge is an older design and the connections are not Wedge compatible
In converting the Meter Bulb (Back light) to LED, Wedge I looked for a socket but couldn't find one and came across this one
Because it is impossible to install it as it is, the Socket part is partially shaved and Harness tape Fixed in
The above is not very helpful as this is a regular usage, but if your product meets the standard, you can use it in the following ways The process is easy if you have
View detail
The Position lamp of Honda GB250 is incorporated into the Headlight, and, as for the original manufacturer's product, the yellow mouthpiece valve of 3.4W was used.although the Valve of the Clear is used since a yellow Valve cannot be obtained after the Va
The Position lamp of Honda GB250 is incorporated into the Headlight, and, as for the original manufacturer's product, the yellow mouthpiece valve of 3.4W was used.although the Valve of the Clear is used since a yellow Valve cannot be obtained after the Valve carries out a ball piece -- not quite satisfactory -- a thing -- it is an insufficient color.
-- there -- a M&H pine -- a Stripe -- the Position light was used combining the wedge bulb of a Wedge socket (inside) and an Amber color.since the path of the Socket was the almost same Size as the metal things of an original manufacturer's product, it was able to be come out of it, and it was able to be attached to the original position.The left-hand side of a photograph is an original manufacturer's product, and right-hand side is the combination of a Wedge socket and a color wedge bulb.Does neither modification, deterioration nor a glow occur with the heat of a Valve? Although the color of the
Position lamp turned into a classic Amber color and is satisfied, a Socket is a product made of a Rubber, and since it is in contact with the Valve, it is somewhat anxious.Since it is not always [
] a lighting type, I think that it is OK, but they are worries for a while.
View detail