M&H MATSUSHIMA Motorcycle Reviews

Filter

Write a review and get Webike Points!

Reviews

MSX125 (GROM) M&H MATSUSHIMA Clear all

M&H MATSUSHIMA

30 Jan 2024

Led Headlight Bulb for Moped Ponled HS1

Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC

Japanese Webike user

4/5

Easy Pon-mount LEDs

It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail

M&H MATSUSHIMA

09 Dec 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

White light!

The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail

M&H MATSUSHIMA

12 Nov 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

3/5

Low cost Low Bright

To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail

M&H MATSUSHIMA

04 Nov 2023

Led Headlight Bulb for Moped Ponled HS1

NO NAME

2/5

The LED light bulb brightness and projection angle

I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating. View detail

M&H MATSUSHIMA

28 Oct 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

It is easy to install.

The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement. View detail

M&H MATSUSHIMA

29 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

5/5

M&H Mazda StripeLED Bulb installed in Z125pro (last model)

[How is it used? Mostly city driving

Was the one you received as per Image? Yes.

Was the installation difficult? Quite easy.

How was your experience with it? The color of Light becomes White, and it is very good to brighten it up.

[Included Parts:were they on? None

[Was there anything that disappointed you? None

Point and hang of installation HEXBoltQuantity holding the head lampCover:Pair (for Left and Right) and loosen the Bolt under the Head lampCover to reach the Valve of the Light. Then, simply remove the cover, remove the bracket that holds the valve, and replace it. No modification is required.
It is better to use LEDs for the position lamps as well, since the overall color is whiter. View detail

M&H MATSUSHIMA

28 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

5/5

LED Headlight Bulb for Z125pro (last model)

[How is it used?
City Riding/Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy. No machining is required. All you need are ordinary tools.
How was your experience with it?
The light color is WHITE, brighter and very good. See photo for color difference.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Head lampCoverQuantity with HEXWrench:Pair (for Left and Right) HEXBoltQuantity:Remove the 2pcs. and loosen the normal bolt that holds the bottom side of the Head lampCover. There is no problem to install the valve, such as the large size.
[ITEMS TO BUY TOGETHER
LED Position Lamp (T10Type)
The low price with a reliable Brand is sufficient to meet the demand for LED conversion. View detail

M&H MATSUSHIMA

13 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

Necessary and sufficient

Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.

Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.

Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.

The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.

Recommended for those who require ease of installation and reliability due to simple construction. View detail

M&H MATSUSHIMA

27 May 2023

Led Headlight Bulb For Moped Ponled HS1

Japanese Webike user

4/5

Bright!

I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.

It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.

It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay. View detail

LED Headlight Bulb for Mopeds Ponled HS1

M&H MATSUSHIMA

26 Oct 2022

LED Headlight Bulb for Mopeds Ponled HS1

Japanese Webike user

4/5

Good cost performance for an introduction to LED Light

Installed on SUPER CUBJA10 model, selected because it is easier to install than OEM ProductHalogen bulb. The low beam is quite bright. The high beam is not so different from the low beam because the low beam is quite bright. Overall, the price is not much higher than Halogen, and it is easy for beginners to install, so I recommend it for beginners. Incidentally, when installing, the bolt just below the light should be loosened by turning it as if peeking from below. I turned it the other way and had to replace the entire light housing. (???????) View detail

M&H MATSUSHIMA

21 Oct 2022

LED Headlight Bulb for Mopeds Ponled HS1

Japanese Webike user

4/5

Easily.

Easily replaced with a pon.
The color is now White, but the light intensity is not good. View detail

M&H MATSUSHIMA

01 Oct 2022

LED Headlight Bulb for Mopeds Ponled HS1

Japanese Webike user

5/5

It is easy to install.

Flicker occurs during Idling as with Halogen, but Once it starts running, it stabilizes.
Since there is no control box, installation is easy. Moreover, the price is as low as High WattageHalogen.
The other thing is durability. I hope it will last a long time. View detail

M&H MATSUSHIMA

07 Jul 2022

LED Headlight Bulb for Mopeds Ponled HS1

Japanese Webike user

3/5

Wish it was a little brighter.

Reasonable brightness for a moped.
PlusOnHigh beam feels subtle and dark underfoot and in the distance.
Low beam light distribution was good. View detail

M&H MATSUSHIMA

05 Jul 2022

LED Headlight Bulb for Mopeds Ponled HS1

Japanese Webike user

4/5

Replaced here because it was dark.

The OEM was Halogen, so of course it was dark, but we replaced it with this one.
I don't have any experience on the road at night yet, but I'm hoping for the best there. (Lol) View detail