Reviews
If you like the look, it's Recommendation!
[How is it used?
Mainly used in Touring of 100-200km
Was the one you received as per Image?
It's a lot bigger than I imagined.
Was the installation difficult?
The Screen itself is easy to install. I didn't install the molding because it was difficult to install.
How was your experience with it?
Much less wind pressure from the neck down on the highway!
It's a lot easier to get down lightly.
[Included Parts:were they on?
[Was there anything that disappointed you?
It's a matter of taste, but I thought it was a little too Large.
I hesitated with the GIVIScreen, but I decided to go with this one, which is a little bit larger and emphasizes the windproof effect.
View detail
Fits: KTM 390DUKE (390DUKE), KTM 200DUKE (200DUKE), KTM 125DUKE (125DUKE)
More effective than Bikini cowl
It fits perfectly with the design of my DUKE125, it's a 125 so it's more about looks than wind protection but it's very good looking and I love the visibility.
No doubt about it.
View detail
Better looking than OEM.
If it is longer upward than OEM, the windproof effect is increased and I am satisfied.
However, it takes 3-4 months from order to delivery.
It arrived when I forgot about it.
View detail
Looks a little Gap from what I like, but it works!
[How is it used?
It's adjustable, so I'm testing it at various heights and angles.
Was the one you received as per Image?
I thought it would be less noticeable. [Color] I chose the Clear color and the Screen was nice and inconspicuous, but the Bracket was completely visible! (Lol)
I think the edges of the Screen are handled nicely.
Was the installation difficult?
Installed on MRA Racing Screen.
There is a tensioning Seat for hole drilling.
It's in Seal so it's a one time use only.
If you want to make a hole in the second or later Screen, you should copy the Seat.
If you drill the holes as shown on the Seat, depending on the shape of the Screen, the distance between the Brackets may become narrow and stick out?
The instruction manual is in a foreign language and I have no idea what it says.
How was your experience with it?
It is Full Cowl originally, but the wind that hits the body was reduced further.
I think I'll stand it up when driving on the highway and fold it up for normal use.
However, I'm worried about the durability if it won't break when I put up the Shield the most and get up to speed.
[Was there anything that disappointed you?
None in particular.
I bought this product after seeing an imprecation of this product installed on the same car model.
If only I'd known that sooner, I wouldn't have had to buy another Screen...
It is also good that it can be easily used for other Screen by replacing it with Attachment which is sold separately.
View detail
MRA competitive windshield
My car is Damao Honda's CBR1000RR, and I bought this MRA elevated competitive windshield on Webike. The material of this product is acrylic. The color of this windshield is gradient and heightened. On windy riding roads, we can ride behind the windshield, which can better block the direct wind. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the prices will be more and more favorable. ---------------------------------------------- My car is a big trade Honda CBR1000RR, I bought this MRA windshield increased competitive in Webike. This product material is acrylic, this color gradient windshield, and heightening, windy road riding, we can lie on the windshield ride, better barrier wind blowing straight. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
It looks good, but Wind Cutting is great because the height is lower than OEMscreen.
As the title says, it looks good, but Wind Cutting is great because the height is lower than OEMscreen.
I thought about Touring use, and as a result, I replaced it with a Screen Touring.
URL → https://www.webike.net/sd/3459726/
Look → Original
Touring → Touring
It is good to use it for different purposes as shown above.
We have 3 Type, but we still have not installed Screen Racing.
The video was taken with Screen Original installed, but the Wind Cutting sound is great compared to OEM Screen.
[How is it used?
Street riding & Touring.
Was the one you received as per Image?
It is shorter than OEMScreen.
How was your experience with it?
Wind Cutting is increased because it is shorter than OEMScreen.
[Points to note]
Please crimp the attached braid with the attached Bracket.
How did it compare to other products?
Recommend Touring for Touring use because it is shorter than OEM Product.
Other items that would be helpful
Point of installation and hang/attached braid crimp on the attached Bracket.
Items to buy together/Resin Coating Agent.
Comments and Requests to Manufacturer/I would like to see the braid and Bracket sold with Maintenance supplies.
View detail
As the name suggests, it is for Touring.
* Before Screen Touring, I used Screen Original, but Wind Cutting to Rider is totally different.
* The video shows the Touringscene with this product installed.
[How is it used?
It is a town ride - Touring.
How was your experience with it?
The name "Touring" is also for Touring.
How did it compare to other products?
Wind cutting to the driver is less than OEM products.
[Points to note]
Both ends of the attached braid should be crimped with the attached Bracket.
Other items that would be helpful
Included Parts:With/without braid and Brackets to stop braid.
Items to buy together/Plastic coating agent.
Opinion and request to Manufacturer/The spare of the braid and the stop Bracket of the braid should be sold.
View detail
Screen of SUPER SPORTS750 can't be other than mra
R1, Panigale, and Busa, we always wear MRA Screen on our SUPER SPORTS 750. View detail
mra wind screen
Delivery is fast,It much higher than the original,but it have a gap in front. little wind will Pass through the gap. good quality View detail
Affordable
It is easy to install on Screen at an affordable price.
Recommendation for those who are concerned about the outside of the Screen.
View detail
Well, it's a good windbreak.
On the highway, you can feel the windproof effect just fine. It's also useful for everyday use, usually leaving the Gloves pushed in. View detail
Fit for curvature
The ZX-25R A-Tech Screen was left uncut, so I used it to make it look better.
I was worried about the fit because of the curved lines, but the Large was sturdy.
The clip that stops the end is Chromate plating, so if you don't rustproof it once in a while, the white rust will float.
It is better to crush it lightly with Pliers after fitting because the crimp is loose.
View detail
Mounted on external Screen
I installed it on the Screen of Other Brand Product. The material is relatively soft and durable and I was able to install it without difficulty. The length is also enough, and about half of it was left over, but I keep it for spare parts. View detail
You have to be careful about the mounting position. (Lol)
[How is it used?
Installed about a year ago and still in use.
Was the one you received as per Image?
In the Image after installation, I thought that it would become more Parenthesis good feeling, but I felt that the width was a little too Large.
Was the installation difficult?
There is no translation in the Instruction Manual, so I worked while looking at the English version, but when I attached attachments, there were some parts that I didn't understand well, and I did it through trial and error.
First of all, there is work to drill a mounting hole in Screen. Because there was a pattern for positioning the hole, it was helpful, but the pattern was Seal, and although the work was thought about well, it took time to paste it for not being accustomed.
In addition, in order to attach it to the Spoiler screen of MRA this time, because the pattern was not attached according to the Instruction Manual but it was while adjusting the position back and forth, I used care. After making a hole, it was hard to understand even while looking at the explanation chart though it was supposed to be the easy work of only assembling Attachment and mounting it on Screen.
How was your experience with it?
Although it is necessary to Unlock Quick fastener to operate LINK to adjust the position and angle of Spoiler, if I get used to it, position adjustment is easy and I think that safety and durability seem to be high for the portion which can be locked.
Although the position adjustment of Spoiler is not done frequently, I think that it is functional and advantageous that the operating range of Spoiler is Large because LINK is Double hinge.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
I want the illustrations in the Instruction Manual to be large and clear so that I can understand the shape and direction. (Lol)
I also wanted to include a spare Screw.
View detail
SUPER SPORTS750 Screen mra
It was on a cbr1000rr that was given to us by a friend at a discount. Originally we had a mra Screen on our 2008 Canada MODEL yzf-r1. View detail
Correction on interference with Mirror
Corrections to the earlier posted imprints
I posted an impregnation about the interference with the Mirror, but it was possible that the angle of the Handlebar was also affecting the interference with the Mirror.
In the normal Handlebar position, it may not interfere.
We apologize for the error and make the correction.
The Screen itself, I like very much and I can recommend it to my friends and acquaintances.
View detail
Black Painting of Wiring Concealment and Japanese Vehicle Inspection Correspondence are happy.
I installed it on my 2009 CanadaMODEL Busa that I got from my brother.
I have been using Zero gravity Double bubble for Circuit Running, but I have been using MRA's Screen on my 2008 yzf-r1, and the front of the Screen has Black Painting to hide the wiring. I knew that I could pass the inspection easily with only structural change because the edge of the Screen and the Rider side have the molding of Rubber, so I knew later that there is a Screen for Busa, and I replaced it.
Windproof effect in Circuit is almost the same here and Zero gravity. Visibility is OEM same etc. because mra has more thickness.
View detail
Depending on the car model, drilling may be necessary.
This is my third purchase in total. I've decided to buy Screen as MRA, so I don't hesitate to buy it. Color. [Color] It is Clear. The shape is also well parenthesis and was used in Motogp Kawasaki ZX-RR. However, the position of the hole is a little off, and the hole was moved by sanding. (The same is true for the two sheets I purchased last time). It may require some drilling depending on the car model, but that's just the way it is. View detail
On the edge of the sharp Screen!
I bought this because the edges of the Screen can be sharp.
Recommended for those who cut Screen.
It is easy to install and comes with a gold clasp.
View detail
Japanese Vehicle Inspection Correspondence also hides MeterWiring.
It was the right choice to choose this one that hides the Japanese Vehicle Inspection Correspondence and MeterWiring in the Screen of Other Brand Product.
Moreover, the price is reasonable and the rectification effect goes up considerably compared to the original shape.
Both circuits and public roads are great looking and less fatiguing!
View detail