Reviews
Fits: KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Wouldn't it be cooler if it were a little longer than OEM...? For those who think...
I was thinking that an OEMScreen would look a little sad, but I bought it because it was the size screen that Long had been looking for.
Installation is very easy, just remove and replace the screws!
When I actually installed it, I was glad I had purchased it because it was exactly the shape and length I had imagined and liked!
Please note that I honestly don't think you should expect anything in terms of wind pressure (lol).
View detail
Exactly
The CL250 has a Meter in the back, so this product avoids the Meter well and looks like an OEM Fit! View detail
Thin scuff marks are ....
The 25R is equipped with Smoke Screen by Magical racing, but the 4RR is Clear because it is a track day Main.
The large holes for well nuts and other mounting bolt holes fit EXACTLY with the OEM. With a bad product, the bolt may be forced into the slant, etc., but there is no problem with MRA's screen! The only regret is that there was a thin scuff on the inside running horizontally! The packaging is carefully done.
Maybe it got on during transport? The blindfold treatment on the tip has been done for a long time. It's a very professional item.
View detail
Large satisfied
The Handlebar area of the appearance is Refreshing.
I like the shape Design.
There were no distortions found in Other Brand Products.
We are very satisfied with it
View detail
for Race.
Purchased to meet Race regulations.
It can be cut to the required length with scissors for installation.
It may be roughly twice as long.
View detail
Summer Shield
The OEM Shield is excellent and windproof, but I bought the Small Type Shield because it gets too hot in the summer.
The OEM Product is about between the nose and eyes at the lowest position, and wind protection up to the shoulders on the sides, but this product is about 12cm shorter, so the wind comes up to the upper chest and armpit area.
The instruction manual is in German, English, etc., but it would have been very easy to attach the washer if I knew how to use the long screw on the bottom side to stop the washer with the Rubber O-ring. The molding on the edge would float in the recess at the top, so I put the included Clip on this part to stop it from coming off. I had a hard time because the braid was hard, but if you soften it with hot water, it is easy to put it on.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1100
Cool
You can't ask for visibility with this Screen's color.
It is really dark.
But I think it looks pretty cool.
View detail
For Z900RS
Material:The instruction manual was not very clear on how to install the bracket.
I put CR-1Glass coat on it a few days ago because I thought it would be scratched by wind since it is stored under cover.
In addition, here is a photo with a 40cm MRAWindscreen Mole to prevent any difficulties with vehicle inspections.
I'm thinking about a Bikini cowl in the future, but at a lower price, because it's quite windy when driving over 200km/h.
We will repeat the running test with this beautiful looking product for now.
If you can wear a Large size, that's fine, but not too Large because it will make you look like an old man with a SUPER CUB.
I really don't want to. I think this is the limit with Screen.
In addition, I will upload a photo of the Bracket installation. It is fastened like this.
The colors are designed to show Meter, so [Color] Clear would be the only choice.
I tried to eliminate static electricity with Aluminum Tape and AdPower, but it didn't work.
A piece of conductive aluminum tape, chopped into small pieces, will be applied in inconspicuous places to reduce running wind resistance.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R750 R
It may be a little tricky to install if it is your first time.
I replaced it for the first time because the Screen had cracked over time. Naturally, the OEM product was not available, so I was very happy with the product. The product itself is very good, the large size is about the same as the OEM Product and the holes fit perfectly. In the product description [Color] The screen I received was clear/graded, but there was no gradation on the screen. I was fine without the gradation, but now the screen is very transparent and I can see the back of the meter without the OEM gradation. The price is not too expensive and I am very satisfied. The installation depends on the type of car, but I think it will be a surprisingly difficult job if it's your first time. It is not difficult or complicated, but I had a hard time removing the well nut from the screen and upper cowl before the replacement. It is better to remove the upper cowl, although it is troublesome, and you should ask for a new well nut when you install the screen. The old well nut is not reusable. I had to go to the store to buy it because I didn't have the old one ready. It didn't fit easily. The new screen has a clear protective seal on it, so it is better to peel it off before you start work. I noticed the protective seal after I finished and had to start all over again. View detail
Recommended for Touring
Ideal for touring because you can control the wind on your body.
Fatigue is totally different on the highway.
Helmet no longer attracts insects.
Personally, I think people who wear these are used to running.
There are Chinese copy products available on the Net, but they are different in precision and strength.
I would recommend this one, even if it is a little more expensive.
View detail
Good look and practical
I'm delighted with the purchase. About quality and texture: German quality, you will never go wrong. About the feeling of use: It took away the wind blast from my chest. But it makes my helmet noisier. Products to buy together: Red Scorpion slip-on exhaust. Difficulty of installation: Very easy Cost performance and comparison with other products: Slightly costly but worth it. About shipping and packaging: Awesome! Any concerns, cautions, or advice when purchasing: Nope a View detail
High speed is easy. Design is good.
Buy products of this Manufacturer.For Motorcycle with Cowl I have replaced all past. The situation of the wind at high speed becomes like going over the Helmet, allowing you to travel long distances with ease. View detail
Installation instructions are only a few pictures.
The wind from the CB was too strong, so I chose MRA, which I have used before to alleviate the problem. (200 yen each) I bought a new helmet and adjusted it to reduce wind exposure from city to highway, but it doesn't hit me too much up to the shoulder, but on the highway, I'm worried about wind cutting noise to the helmet. (CUBT RT33) Well, it is a commuter main so I am focusing on wind reduction. Two types of Torque are required for installation:T40 for removing the Light and T25 or T30 for the back of the Meter, and if the screws are tightened in the wrong order with the tools I have, it was troublesome because I could not add more screws later. I added a RubberWasher to the front and back side of the screen. View detail
So satisfied it
quality is good. I think u know MRA's goods quality. Easy to installation but i recommend buy new rubber holder for windshield. Easily damaged. The shape and style is more better than stock for ride highspeed. View detail
Be careful in case of rain.
Raindrops roll in around the Meter at speeds exceeding 150 km/h (mystery)...
However, when a crosswind came, the handlebar had been taken away, but this was not the case this time.
View detail
GOOD
A very good product with a beautiful appearance and low profile practicality. The part that extends backwards and tilts up effectively acts as a disturbance, allowing the airflow to leave the chest during driving. The hole positions are very precise and easy to install. View detail
For Z900RS
I put it on so that it would not interfere with the vehicle inspection.
No particular problem with MRA since it is MRA's Screen.
The grips were quite tight, and the fit was Large strange.
The length in the photo is 40 cm use.
Clips are securely fastened without being attached.
View detail
Functional beauty without being too assertive
When it comes to Screen replacement, nothing but MRA is an option!
The height and slightly extended length of the OEM forme are not compromised, so the wind protection effect can be felt not only at high speeds but also in the city.
The high precision of the installation meant that there was no need to adjust the screw holes, and there were no noticeable gaps or lifts.
Some of the worst products on the market are made of resin so uneven that the view through the screen appears distorted, but this manufacturer's products look normal and normal is the biggest thing.
I personally like the lower 1/3 painted BLACK!
View detail
Nice
Product has excellent windproof effect View detail
Genuine MRA screen for MT10
Not usually something I would buy for a naked bike but needs must when travelling to and from work on a daily commute. I was going to go for a different make but have read a lot of great reviews for this one. MRA is not really a brand I have had much dealing with. A few customers have had these brand of screens. They are reasonably priced and the fitment is perfect with what I have read. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days. The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course yo need, all teh bolt holes are perfectly made. Not really much else to say about it until I actually take a ride out. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail