Reviews
High sense of quality and rigidity
The engine mounting bolt is removed and installed, but there is no need to support the engine. You don't need to support the engine.
The color is Black, but I think it is SMART and I personally don't feel uncomfortable with the body color.
The bracket part is also very rigid and has the right amount of lateral overhang.
Maybe there is no Damage on the Bracket part by the impact of a standing fall.
However, it is only a Slider, not an Engine Guard, so don't expect any more Guard functions than that.
I believe the Slider is intended to glide over the body of the vehicle in the event of a fall and prevent injuries where the Rider is caught in the body of the vehicle. The price is relatively low and it looks SMART.
Depending on the material and road conditions, the Engine Guard will also glide reasonably well. The price is relatively expensive, and the appearance also changes like Large.
The guards and sliders sticking out horizontally on the underside of the vehicle will cause the tire to float when the vehicle falls over, causing large damage to the upper part of the vehicle such as the handlebar and tank.
In the case of the VTR, when it falls, the RearSide cowl, footpeg, Handlebar End, and Lever will take the main damage, and if you are unlucky, the Headlight and Meter area will be hit hard.
View detail
Understand the function of the product before you buy it.
The product itself was convincing in terms of quality and shape.
However, it later occurred to me that the Mounting Slider would be effective when I was driving on paved roads and falling over.
It doesn't seem to be that effective in off-road falls and standing up....
I wonder if I have installed something unnecessary for most of my falls on the latter. That said, I now think of it as ” insurance ” against falls on the pavement.
View detail
Hmm, well, that's about it …
I bought the antlionMounting Slider at We-Big in 2013 for the first time in years It's been a long, long way to this point, and it's been a hell of a ride
I simply couldn't install it using the DESSERTExhaust System Up Type Since the Down Type Exhaust System was replaced, it was possible to put it on Yes
Installation itself is easy, but you need a tool with a slightly longer neck, such as semiLong ratchetetc I can't install it properly. 14mm semi-long or longer seems to be two pieces of wood, so be careful You can buy long tools for a few hundred yen if you're not picky
Because it doubles as an engine mount with plus alpha, use screw lock agent It's about 200 yen for a small type
The appearance is as shown in the image, and we won't know how effective it is until it's mossy, but the Engine and Wouldn't it be a good buy if Tank could protect it?
DoAsInfinity~!
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
footpeg hits before ? ? ?
Mounting on WR 250X
Engine slider does not hit when football is killed and footpeg and Rear brake hit first.
It will be after the Rear brake is twisted that it will function as Engine slider ? ? ?
Too bad I think that things look good
View detail
Although it is an amateur, it was easy to install.
I do not know the effect because it is not moss, but I think it is a pretty firm product.
I like it because it looks good as well.
I think that it is better to have Torque wrench for tightening.
(Torque Torque was stated in the Instruction Manual)
View detail
It does not suit the SR.
It's better than nothing, like insurance. Originally it's a thing to slide the car body out of Course. It seems to be effective if it is light standing gobble degree. Quantity 14 mm Socket for installation : 2pc. Set If you have one. I am 1pc. I only had 14mm and 17mmNut installed.
View detail
Perfectly!
It's SEROWFI, but it's unbelievable, it came in in no time. It might be a pain if you do not have a long socket - - -
Wise GEARUnder Guard (Resin Type) And does not interfere with Power Beam!
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., SUZUKI 250SB, KAWASAKI D-TRACKER [D-Tracker]., SUZUKI 250SB
It is Large young than I thought
Installation was easy, but I am worried that WaterLine will be forced to somewhat forcibly mount and that the water flow will be unimpeded.
As a thing, Slider part and Mount are beautiful, and Bolt of installation is also plating well, I think that quality is high. When it kills, it seems that Engine will protect it exactly, so it is recommended to put it in preparation for standing.
View detail
Fits: DUCATI MONSTER750, DUCATI MONSTER600, DUCATI MONSTER900
It was bigger than I expected
I installed it in Ducati M 900.
I was able to Dress-up also to the old car.
I get a little space between Frame and Spacer
Processed with Seal.
I bought it at webike's Sale, but at the same webikeSale the next week I got a little
I was cutting prices. It is regrettable that it is kind of unpleasant.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker 125
It attached to serve both as the insurance and the Dress-up effect up at the time of a thing fall.If it does as a description about attachment, I will think that it is satisfactory probably. Although it is next appearance, the form of a resin pa
It attached to serve both as the insurance and the Dress-up effect up at the time of a thing fall.If it does as a description about attachment, I will think that it is satisfactory probably.
Although it is next appearance, the form of a resin part thinks that it is beautiful, and the Design of the Logo of an antlion is also good and its Parenthesis is good.although the effect as a
SLIDER50 becomes empty without understanding, if it does not fall, before a SLIDER50 grounds on a road surface -- a Step bar -- next, a Shift pedal and a Brake pedal are likely to be damaged first -- coming out -- the shin.Although it may be good for protecting the Body, the one to a slight degree where overall width is wider may be good.
View detail
It took two months, after placing an order before arriving at hand. since -- it is *4 piece. The attached touch is quite good also at .
It took two months, after placing an order before arriving at hand.
since -- it is *4 piece.
The attached touch is quite good also at
.
View detail
SLIDER50s in front and behind and simultaneous wearing. Attachment is easy although pains was taken over removal of pure Screw. Also making is solid.
SLIDER50s in front and behind and simultaneous wearing.
Attachment is easy although pains was taken over removal of
pure Screw.
Also making
is solid.
View detail
[ -- the Webike Monitor ] -- attachment of this product is the 2nd time. Since an attached part got damaged by the fall last time [ ], it is exchange. Since it was the one Frame support, distortion of a Frame was anxious on the vehicles tar
[ -- the Webike Monitor ]
-- attachment of this product is the 2nd time.
Since an attached part got damaged by the fall last time [
], it is exchange.
Since it was the one
Frame support, distortion of a Frame was anxious on the vehicles target with weight, but two flat knots have been found [ a great problem ] and purchased in comfort probably because of the thickness of a Shaft.
Although he does not want to already fall, I think it beautiful to make No. 1 in the same price range.
View detail
Although the engine performance is not known yet, having chosen the White color answers correctly. dirt is an One-point Accent to a Motorcycle, although it grows into mind.
Although the engine performance is not known yet, having chosen the White color answers correctly.
dirt is an One-point Accent to a Motorcycle, although it grows into mind.
View detail
It falls with some slip down at about 50 km/h on right-hand side on a rainy intense day. It was meaningful although I contributed before the impression of the contents of being almost meaningless about this mount slider! If it is original, the slider
It falls with some slip down at about 50 km/h on right-hand side on a rainy intense day.
It was meaningful although I contributed before the impression of the contents of being almost meaningless about this mount slider! If it is original, the slider which must be a step, a brake pedal, and parallel has turned to those for the wrong directions with the impact of the fall.
The powder with a white slider which was able to be shaved per Kami, a tycoon's case guard, had scattered.
However, since a little [ that the slider was actually able to be deleted / merely ], when reinforcement was high, he felt actually.
If this slider did not exist, possibly the step and brake pedal which are inside had hit with the ground surface directly, and since that one was considered to become large, although damage thought that it was useless, it had attached, and was good. [ of that one ]
:D which can be used again, and is likely to be simply fixable since that is right if the crooked bolt is exchanged
View detail
It attached as look before you leap. It is not dissatisfied in a price, quality, etc. However, since a by no means deep angle of bank becomes still severer even when it is normal, special attention is required.
It attached as look before you leap.
It is not dissatisfied in a price, quality, etc.
However, since a by no means deep angle of bank becomes still severer even when it is normal, special attention is required.
View detail
Fits: DUCATI MONSTER1100/S, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI MONSTER696
It seems that it purchased since it was a little cheap compared with DUCATI MONSTER 1100S to the make of the purchase other company, but it is satisfactory to functionality. In order to remove the mount bolt and nut which are attached from the first,
It seems that it purchased since it was a little cheap compared with DUCATI MONSTER 1100S to the make of the purchase other company, but it is satisfactory to functionality.
In order to remove the mount bolt and nut which are attached from the first, unless it works since the bolt side is fixed, it cannot idle and cannot remove a nut.
2 sets of socket wrenches are prepared, or a device is required.
(I loosened from the bolt side with the socket wrench, I having combined the adjustable wrench with the longer socket, and fixing the opposite side.) The attachment itself was easy and it was able to be managed with about 10 minutes.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
O is comparatively cheap even if compared with the other company. Since a crankcase and near a water pump are protected when it falls, when such goods are regarded as It will become insurance at this price from an expensive thing, they are cheap.
O is comparatively cheap even if compared with the other company.
Since a crankcase and near a water pump are protected when it falls, when such goods are regarded as It will become insurance at this price from an expensive thing, they are cheap.
(I do not think you get what you pay for) Although it has not fallen yet, he feels easy according to the mood of the moment, and can run.
my case -- front mount rear of all -- it has equipped with the antlion company slider.
Of course, it is satisfied.
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
It was able to stand, although attached also to the vehicles which were before, and the crack of GOKE was able to be kept to the minimum. Since it was a full cowl vehicle this time, it attached simultaneously with delivery of cars. Since green was
It was able to stand, although attached also to the vehicles which were before, and the crack of GOKE was able to be kept to the minimum.
Since it was a full cowl vehicle this time, it attached simultaneously with delivery of cars.
Since green was one of the things of an antlion although manufacturers of what were also only white and black, it could unite with the body color and is very much satisfied.
View detail