Reviews
Cospar good
I bought this because I was told that without it, the Swing Arm would be scraped off in the event of a fall.
The length of the shaft that came in the first package was wrong, but they sent it to me right away.
I am satisfied with the quality and response for the price.
View detail
Antlion front slider
Inner rod dia M6 was to small, M8 or M10 will defintely solid. As i already have front, rear and engine mount kit. "So cool in a set" View detail
Antlion rear slider
Well front slider looks cool, but inner threaded rod only M6 in diameter. If rod were M8 it will be solid. Got front, rear & engine mount, looks cool in a set. View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Purchase at the same time as Rear slider
Installed to protect front fork and other parts in the event of a fall.
I think it is just the right size.
I don't know how effective it is because I think Handlebar will hit the ground first, depending on how it falls.
View detail
antlion Front slider CRF250L MD47
[How is it used?
Buy for Custom
Was the one you received as per Image?
Yes
How was your experience with it?
Satisfied
[Points to note]
Nut co-tightening from both sides, so a socket wrench is needed for that.
How did it compare to other products?
MD47 Slider is the only product available, so I can't compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Wish to develop products with hexagonal hole Bolt
View detail
antlion Rear slider CRF250L MD47
[How is it used?
Buy for Custom
Was the one you received as per Image?
Yes
How was your experience with it?
Satisfied
[Points to note]
Nut co-tightening from both sides, so a socket wrench is needed for that.
How did it compare to other products?
MD47 Slider is the only product available, so I can't compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Wish to develop products with hexagonal hole Bolt
View detail
After all, this is the MOTARD Slider!
I really like the antlion Slider, the shaft strength is solid, the quality of the duracon resin is good, and the mounting bolt comes with a SpringWasher so you don't have to overtorque it to get it loose.
This time I put it on my dr-z400sm which I bought a second time.
I am also using it on my WR250X, so I know all about the advantages of the design!
Fortunately, I've never had a fall, but the shape is the smallest possible and the design is well calculated, so it's definitely protective.
View detail
Best Fit and Performance for the Lowest Price
With the Off-roadShop of the neighborhood, First Model Typedr-z400sm of the BALI thing was purchased at a very low price with the trade-in as it is.
I don't have the car in my possession yet because I'm still in the process of getting it inspected and delivered, but I go to the shop every time I have a day off to put on some custom parts and get in the way of my dad's work.
The Slider of antlion that is also being used in WR250X was put on by Front and Rear Set.
This is a good one, the price is very low, the shaft is decent, the quality of DURACON resin is good, and the size is moderate, so the protection range is perfect.
Springwith WasherBolt is a nice consideration.
View detail
Bolt On for some reason.
I heard that there is a case that you need to widen the bolt with a drill when you pass it through the hollow part of the Axle Shaft on the front, but in my case, it was large and strong.
However, there was a trick and mud was stuck inside for some reason. I removed the mud with 4-wheel windshield wiper rubber brackets, removed more mud with a guard wire, and washed with Parts cleaner.
The Steam washer only washes with water to protect the Bearing, and I'd like to see it avenged by not applying pressure, so I'd better watch out for clogged areas once in a while.
View detail
Excellent design at a great price.
I also installed this product in my wife's WR250X for Course. Since it has already been installed on our 2007 WR250X, the goodness of the design of this product, simple and less self-assertive design is superior to the products of other companies.
It is designed to minimize damage to the Shift Pedal and Brake Pedal, and with the Axle Slider and Silencer Slider installed, it is also an excellent guard for circuit riding. It is also a very good Guard for circuit riding. We have no experience with falls, so we can't attest to its actual protective power, but it is well designed and should be used.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Outstanding accuracy and design for such a low price
I also installed this product on my wife's WR250X for Course. As it has already been installed on my 2007 WR250X, it is designed to be lightweight, simple in construction and less assertive in design, and when it falls, it can surely protect the Axle Nut and the main parts around the front. The Axle Nut is designed to protect the Axle Nut in the event of a fall, as well as the main parts around the front. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Cheap, simple and very good
I also installed this one on my wife's WR250X for Course. I have already installed it on my 2007 WR250X, so I give it 100 points for its light weight, simple construction, and low self-assertion design.
I haven't experienced any falls, but it's definitely shaped to protect the Axle Nut and Swing Arm. Please install it for insurance in case of emergency!
View detail
Rear slider
Easy to install and looks great! View detail
I'm playing a role.
It supported me when I was standing on a slope.
I think the SliderBody shaves off about 2 minutes.
The Material may be softer than you think, so if you've got the speed, it's going to be aggressively cut down.
View detail
as insurance
I think you should buy one if it will save you some money on repairs. The installation was Bolt On as well. View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250AR
Slider also in Off
On the occasion of the forest road touring, I installed Slider though it is a part for Road.
There is a possibility of getting caught and eating a high SIDE, but I want to avoid the risk of sliding and falling to the bottom of the valley, so I put it on.
I haven't fallen yet, so I don't know how effective they are, but I think they will reduce the damage from standing, and at least I avoided the mud clogging in the Axle Shaft.
It looks chic and I'm happy with it.
As the car is getting older, more and more parts are missing, so I want to protect the parts and make them last longer.
The Swing Arm is not the original Swing Arm, so I choose the Slider of the CRM250.
The Nut that came with it was Penetrating, so I used a Cap Nut that I had on hand and made one of them a Double Nut to stop it from loosening. The mud clogging should be able to be avoided by this.
Try it.
View detail
Bling and protection at the same time
The antlion Front Slider looks good - and is easy to install too with few tools required. This is not a required product to install on your motard setup but if you want an extra peace of mind get one. This will save your forks from getting scratched and quite possibly, avoid damaging the axle on harder crashes. I just wish it is available in multiple colors. +Looks good +Price +Easy to install View detail
Nice product and customer service!
The antlion Rear Slider looks good - and is easy to install too with few tools required. This is not a required product to install on your supermoto setup but if you want an extra peace of mind get one. This will save your forks from getting scratched and quite possibly, avoid damaging the axle on harder crashes. I just wish it is available in multiple colors. +Looks good +Price +Easy to install Note: I received the wrong product but WeBike decided to replace the wrong one free of charge. Thank you WeBike for the excellent service! View detail
I'm happy with the loosening Washer.
I am using it on a 2007 wr250x. Because it was written that it was necessary to do the screw lock in other people's impressions, I was worried and inspected it to tighten it, but there is no looseness at all. As I thought, thanks to SpringWasher, I don't need to put extra torque and it is effective to stop loosening. View detail
DURACON by antlion is beautiful.
I installed it on my 2007 WR250X, and although I haven't been able to ride in the course this year due to Corona, I fully equipped it with antlion's Slider so that I can return home on my own even if something happens to me because I ride only in the remote mountain passes.
The DURACON construction is beautifully formed and easy to install. You can get the peace of mind of the largest size with the smallest expense.
View detail