Reviews
antlion antlion Rear slider
antlion antlion Rear slider
Items that should be purchased for Motorcycle protection.
View detail
antlion antlion Front slider
The least expensive product in Slider
Custom parts are gradually being discontinued.
I should probably buy it to protect Motorcycle.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Just in case.
It was installed to prevent damage to Axle Nut and other parts in the event of a fall.
I hope it is not too small, but just the right size to be effective.
I bought White, but the Chain oil splashed on it and it was noticeably stained in Black, so I thought I should have chosen Black.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
By the rear slider and the hand guard containing a core, protection of a car body thinks or enough and it equips with it. A front is also merely an additional purchase by it being cheaper than other manufacturers. This setting of price is kind.
By the rear slider and the hand guard containing a core, protection of a car body thinks or enough and it equips with it.
A front is also merely an additional purchase by it being cheaper than other manufacturers.
This setting of price is kind.
View detail
It attaches and easy!
It attaches and easy! View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250AR
Cannot search Bar code.
I had it installed last time and loved it.
A friend of mine was deprived of it because he was going to do a long distance Off-road trip in a hurry, so I bought it again and installed it for myself. (I got the money)
Unfortunately, since I'm repurchasing, I should be able to do a Bar code search, but for some reason, when I do a Bar code search, HarleyParts comes up.
That was the only thing I was very disappointed about.
I changed only Nut to HEX Cap Nut, and applied Screw lock.
When there is a thing that the mouth of the Axle Shaft cannot pass the screw, please shave it. It was written.
Unfortunately, it didn't go through, so I put Drill through.
View detail
Slider
I don't want to be a part of it, but I bought it as a wand to keep me from falling
Anyway, it's hard to tighten the mounting nut! Other than that, it's a good product
View detail
Easy to install Dress-up!
Dress-up I installed it thinking that I should reduce even a little even the Damage at the time of rolling down.
Installation was very easy, but Wrench is Quantity : Pair (for Left and Right) It was necessary to hold down with 2.
Other than that it was very good as it was very smooth.
It is cheaper than those made by other companies but I like it very much.
View detail
With one fall.
I broke with one fall.
Crooked part is caught in Vise
I am using it again after fixing it.
Considering it as a consumable item, a little more value
I wonder if it can be low.
View detail
Can be fixed firmly
As it is an exclusive design item, it can be fixed firmly.
There is no looseness during running.
However, because there are also thin parts, it is an uneasiness point whether Body will not be damaged when it falls over.
View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250AR
Machining on the car body side is necessary for installation.
This product is structured to pass long Bolt through Penetrating hole of Axle Shaft and fix Slider at both ends with Nut.
In the CRM 250AR Front axle shaft, only one side is Penetrating hole Small, so it is necessary to expand this Large. With electric Drill 6. We will enlarge the hole to 5 mm, but without enlarging Large quickly, from 5 mm to 0. Every effort will be comfortable as you make Large 5mm each. Installation of the product itself is easy.
The Slider part of the product was a Small eyes, and it did not float against the car body design.
View detail
It is recommended to also attach it to protect Screw of Axle
Quantity : Pair (for Left and Right) Large cracks and depths of holes drilled in are different, so we installed them in kind, are they fitting well?
There is no Instruction Manual, "Easy design just to replace NORMAL's thing" There was something that I do not understand meaning ... Nothing attached to NORMAL.
When changing Wheel to KLX's thing and going to the mountain etc etc. , I realized that thread protection can be done even when I knocked down, I felt it was good to put this early.
As a thing, it is a beautiful thing, I think that Bolt as installed also plating is beautifully plated and it seems to be strong against corrosion.
View detail
Even with falling over, I felt secure.
Instruction Manual is not attached, "Easy installation just replacing with NORMAL's thing" There was a paper called. I do not know the meaning as to what I am talking to only those not attached to NORMAL ... It is state.
The installation itself, Quantity : Pair (for Left and Right) Because the Large densities of the holes open inside are different, the person who is opening Large is the Right Side, the one who is not open is the Left Side. Because I can easily install it, I do not think there is anyone who is lost, but because Screw lock is recommended, I tentatively attach it, confirm it with Screw lock, attach Screw lock, Quantity : Pair (for Left and Right) It was unexpectedly time consuming to attach it with care so as not to make a difference in the remaining Length.
It is recommended to buy a sense of security. Race ish is just somehow attached.
View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250AR
Processing required
Shape through which Bolt is passed into OEMAxle Shaft. Since Shaft inner diameter is 5 mm and Bolt is M 6, expansion processing is necessary (It is described in the manual).
Therefore, people who can not process themselves can not be installed. (If it can improve around here it is star 5)
View detail
The fall was also experienced although purchased as a Dress-up up. Although it did not understand whether the SLIDER50 was useful, a little SLIDER50 could be deleted after the fall, the Shaft bent, and it had suffered the Damage just.
The fall was also experienced although purchased as a Dress-up up.
Although it did not understand whether the
SLIDER50 was useful, a little
SLIDER50 could be deleted after the fall, the Shaft bent, and it had suffered the Damage just.
-- still -- rapidly -- seeing -- since it does not understand, it is used as it is.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
[Webike Monitor] It purchased to Front-rear 1 clue. attachment did not take 5 minutes. I think that the real value of a SLIDER50 is known when it falls. I would like to attach, before becoming so.
[Webike Monitor] It purchased to
Front-rear 1 clue.
attachment did not take 5 minutes.
I think that the real value of a SLIDER50 is known when it falls.
I would like to attach, before becoming so.
View detail
buying it, if attachment is easy and a price also determines a handy MOTARD -- it will be -- !.
buying it, if attachment is easy and a price also determines a handy
MOTARD -- it will be -- !.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Since WR250X is light and it was easy to treat, although he thought whether it would be unnecessary, it equipped for the sense.If there are two 10-mm Socket wrenches, it can equip easily.the not much rough touch -- not but, be nonchalant -- it cut.
Since WR250X is light and it was easy to treat, although he thought whether it would be unnecessary, it equipped for the sense.If there are two 10-mm Socket wrenches, it can equip easily.the not much rough touch -- not but, be nonchalant -- it cut. View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D Tracker X
It purchases for the purpose of a Dress-up up to the Webike Monitor D-TRACKER-Xs. It is Impact size although it is small parts. It became a racy atmosphere. Since attachment is a Rear-axle penetration type, it needs to remove a split pin.
It purchases for the purpose of a Dress-up up to the Webike Monitor
D-TRACKER-Xs.
It is Impact size although it is small parts.
It became a racy atmosphere.
Since
attachment is a Rear-axle penetration type, it needs to remove a split pin.
Two 10-mm Socket wrenches are required again.
The direction of the structure screwed up with a hezagonal wrench regards one side as good.
View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D Tracker X
It purchased for the purpose of the Dress-up up rather than the original purpose to the Webike Monitor D-TRACKER-Xs. Although it was small parts, it became a quite racy atmosphere. Although attachment is easy, two Socket wrenches of the Si
It purchased for the purpose of the Dress-up up rather than the original purpose to the Webike Monitor
D-TRACKER-Xs.
Although it was small parts, it became a quite racy atmosphere.
Although
attachment is easy, two Socket wrenches of the Size are needed for the structure bound tight with a hexagon nut from both SIDEs.
Since in my case there were two by chance although I thought that it was
10-mm Size, it has attached without difficulty, but I think whether there are some troubled persons.
View detail