Reviews
I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This
I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This part is well made. But the attached pins were so small, I had trouble picking it up when I dropped one on the floor.
I think it would be better if it had uniform standards rather than separate ones for mid-size bikes and large-size bikes.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400
This Motorcycle is owned, and it is this year, and is the 9th year. It is long association.Although it was the distance to the Handle which was not worried at the beginning, dissatisfaction has increased every year. It is because the Long touring
This Motorcycle is owned, and it is this year, and is the 9th year.
It is long association.Although it was the distance to the Handle which was not worried at the beginning, dissatisfaction has increased every year.
It is because the Long touring of it which has exceeded 600 km per day in the past several years has increased!?
I would like to make it the Position which had a margin in the bosom to a slight degree on the Touring of the Tohoku district run indifferently.
-- there -- now -- although considered, it opted for exchange of the Handle clamp drastically.
The S.T.F. Clamp of this antlion is the specification of a 19-mm Back and a 3-mm Down.each
company -- although various Handle clamps are taken out, as far as I know, it becomes a Back size with this first Clamp.
Although he thought that a few was backed too much, since it was meaningless if like [ it exchanged for the thing of the halfway size, improvement in a riding posture could be felt, and it twisted and ], this Clamp was used. exchange will be completed, if there is also no difficult thing and there is especially as long as 30 minutes.Probably, it will be better to ask the uneasier one of a Shop, since it becomes
, however parts important in respect of safe.
It attaches to accessories with it and there is no Spring washer of the slack stop of a Bolt.
Since I was not preparing, either, it has attached without the Washer now, but it feels so that it may be better to be too.
-- run and seen, it became a Position of an ideal which was considered.It was a correct answer in this Clamp of the maximum Back width.The
Corner ring in particular does not need to be conscious of change of a Position, either.The Riding as before is made.The Handle is recommended at those who consider long distance touch and exchange.Probably, those who are enjoying themselves especially with the Touring subject are good.
Slight earliness will be good if it exchanges.I think that I should just also have changed earlier.
View detail
In the pure Stainless nut, the hole is vacant, and somewhat ill-shaped.When the ball head lock nut was looked for, the price was also handy and it was begun to delete it, and the color was also the pure style and was ideal goods for itself.However, the pl
In the pure Stainless nut, the hole is vacant, and somewhat ill-shaped.When the ball head lock nut was looked for, the price was also handy and it was begun to delete it, and the color was also the pure style and was ideal goods for itself.However, the place which also lifts a Tank and into which it puts a profit bar is lost. View detail
[a Webike Monitor] -- -- since structure is beautiful, the product of this Manufacturer can be purchased in comfort. Since it is an Aluminum and a Wound is however easily attached at the time of attachment, cautions are required.
[a Webike Monitor] -- -- since structure is beautiful, the product of this Manufacturer can be purchased in comfort.
Since it is an Aluminum and a Wound is however easily attached at the time of attachment, cautions are required.
View detail
WR250X was attached and used. The Clutch side should cut the end of a pure Grip for Bar-end attachment. The Axel side diverts and attaches the surplus Grip and Throttle for 22.2. Since the price is comparatively [ cheap ] solid, and a Size is also enou
WR250X was attached and used. The Clutch side should cut the end of a pure Grip for Bar-end attachment. The Axel side diverts and attaches the surplus Grip and Throttle for 22.2. Since the price is comparatively [ cheap ] solid, and a Size is also enough and it falls well in a Circuit, it is safe. View detail
Fits: KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella]., KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella].
Since it was rusted, it exchanged. It is ordinarily beautiful well.
Since it was rusted, it exchanged.
It is ordinarily beautiful well.
View detail
Although it was not different from a NORMAL, since he wanted to unify the circumference of a Handle by black, Handle height was exchanged. Since functional Up is a Parts which always goes into eyes although it does not become, I exchange and thin
Although it was not different from a NORMAL, since he wanted to unify the circumference of a Handle by
black, Handle height was exchanged.
Since
functional Up is a Parts which always goes into eyes although it does not become, I exchange and think good
.
View detail
Although the Billet clutch master of Brembo was purchased at this Site, it purchased, in order to unite with the Brake lever which was being used for the Brake side. As well as Design nature, since the feel at the time of grasping a Lever is
Although the Billet clutch master of Brembo was purchased at this Site, it purchased, in order to unite with the Brake lever which was being used for the
Brake side.
As well as
Design nature, since the feel at the time of grasping a Lever is liking, he has no complaint.
It wrote to the Black alumite of the
Option, and took time a little till the delivery date.
View detail
Fits: KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZRX1200R, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, YAMAHA XJR1300, KAWASAKI ZX-9R, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI ZRX1200 Daeg, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, YAMAHA YZF1000 Thunder Ace, YAMAHA YZF750SP, YAMAHA XJR1200, KAWASAKI ZXR750, KAWASAKI ZX-7R
As it is, although it was a good article, it would not do what that a Dial Parts was an option?
As it is, although it was a good article, it would not do what that a Dial Parts was an option? View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R
It purchased as an Accent of GPZ900R. Although the form of making was also very well smart, even if its area which hits the form reason and a Socket is narrow, and it fastens it and it makes cloth bite at the time of a lump, the crack has attached it
It purchased as an Accent of GPZ900R.
Although the form of making
was also very well smart, even if its area which hits the form reason and a Socket is narrow, and it fastens it and it makes cloth bite at the time of a lump, the crack has attached it inevitably.
If they are removed, it is satisfactory in general.
View detail
I think that being sold after the Lever has originally ASSY(ed), purchasing with the single article, and constructing by oneself itself has made a mistake in this product. It was difficult to carry out press fit of phi1.5mm and the about [ die-le
I think that being sold after the Lever has originally ASSY(ed), purchasing with the
single article, and constructing by oneself itself has made a mistake in this product.
It was difficult to carry out
press fit of phi1.5mm and the about [ die-length 6mm ] pin, and to stop this product to the Adjuster thread part by the side of
Lever.
It is impossible, if there are not a Punch and a receptacle fixture when pressing fit.
View detail
Fits: KAWASAKI ZX-6RR, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-6R, SUZUKI GSX-R750 04-05, SUZUKI GSX-R600 04-05, SUZUKI GSX-R750 04-05, SUZUKI GSX-R600 04-05
The object for NISSIN radial pumps was purchased. removing color from NORMAL Lever -- not knowing -- although it fought desperately -- -- it has equipped somehow. It becomes very easy to pull a Brake. It is large satisfaction except attac
The object for NISSIN radial pumps was purchased.
removing color from
NORMAL Lever -- not knowing -- although it fought desperately --
-- it has equipped somehow.
It becomes very easy to pull a Brake.
It is large satisfaction except attachment.
It is x that the
Adjuster is an option.
View detail
When it is the right fall in which a MASTER breaks, since this Parts flies almost certainly, if it is a Circuit, it cannot be searched for (bitter smile). since the Push rod of a MASTER is also almost useless in case of breakage that this Parts flies, th
When it is the right fall in which a MASTER breaks, since this Parts flies almost certainly, if it is a Circuit, it cannot be searched for (bitter smile). since the Push rod of a MASTER is also almost useless in case of breakage that this Parts flies, this Parts should also be just attached to the Push-rod Kit purchased for a Repair, but it is not considerate -- (?) -- it is not attached to things. Therefore, if it corrects at any rate, I will regard sex appeal as it being a Parts good for the direction ... View detail
Fits: KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella]., KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella].
Since Design nature is high, the meaning of the Nut of an antlion which Adds an Accent to the circumference of the Handle which Firmly carried out for a while is also right just. It is not in Design serious consideration, and since the
Since Design nature is high, the meaning of the Nut of an antlion which
Adds an Accent to the circumference of the Handle which
Firmly carried out for a while is also right just.
It is not in
Design serious consideration, and since the tool could also enter firmly, and could be
Closed perfectly and the size has also come out, it can use in comfort.
View detail
Since Stainless-bearing exchange was carried out, it exchanged in passing. Texture is also very good considering the price, and it is preeminent for the appearance effect. Although it was a vehicle type which is not in setting out, since the Siz
Since Stainless-bearing exchange was carried out, it exchanged in passing.
Texture is also very good considering the
price, and it is preeminent for the appearance effect.
Although it was a vehicle type which is not in
setting out, since the Size was indicated by HP of the Manufacturer, it referred to it.
It was a difficulty at the time of
exchange that the Stainless nut had. [ absurdly hard ]
The suitable thing which has a natural tool does not use.
It seems that a Stainless nut will tend to become tight with the time somehow if it investigates.
It is [ whether it loosens by the tool of
, therefore a stock, and ] a check required.
Moreover, since it changes, the Size of attachment is a check required also here!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
Compared with a NORMAL, atmosphere changes considerably.Although it is a Position, compared with a NORMAL, a Handle becomes near, and it becomes easy to escape from the power of an arm.
Compared with a NORMAL, atmosphere changes considerably.Although it is a Position, compared with a NORMAL, a Handle becomes near, and it becomes easy to escape from the power of an arm. View detail
The Top bridge is put on the market from many Brando Manufacturers, and since it is a portion as which a big difference is hard to be regarded, in play is carried out about appearance or texture. Compared with the Top bridge of other company, i
The Top bridge is put on the market from many Brando Manufacturers, and since it is a portion as which a big difference is hard to be regarded, in play is carried out about appearance or texture.
Compared with the Top bridge of
other company, it begins to delete and next gloss is very beautiful.
Marks deleted with the engine lathe are located in a line like a border pattern.
For this reason, it is very beautiful as a Shiningly in the sun hitting.
deleting and carrying out appearance also of the
texture -- no one but high grade feeling -- custom-made one -- the bottom -- I think whether to be goods which can also experience the satisfaction called !! simultaneously.
In addition, there is also much Color variations, and since the Stainless nut is also sold at the Brand, it unites in the same color.
Or charm can also enjoy several kinds with an individual hobby, such as daring to use different colors and taking out individuality.
There is no dissatisfied point as me and they are goods with a very high degree of satisfaction.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
Since it was necessary to offset a Post to the front for the Position change from a Up Handle, and Initial-Adjuster attachment, it purchased. As a result of calculating from one's Position, the Post was extracted to the product made from an antlion. [
Since it was necessary to offset a Post to the front for the Position change from a Up Handle, and Initial-Adjuster attachment, it purchased.
As a result of calculating from one's Position, the Post was extracted to the product made from an antlion. [
]
There is only a Manufacturer treating many Billet partses and accuracy and a Quality are also large satisfaction highly.
View detail
Fits: KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella]., KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI ESTRELLA [Estrella].
The Front was OH(ed), and when finishing setting up again, it attached. The Top bridge was also painted, and since form was pleasing in order to also exchange a Handlebar and a Post and to unify black, the product made from an antlion was chosen.
The Front was OH(ed), and when finishing setting up again, it attached.
The
Top bridge was also painted, and since form was pleasing in order to also exchange a Handlebar and a Post and to unify black, the product made from an antlion was chosen.
Since a pure Stainless top bolt is iron, it is felt quite light.
giving, since it becomes a Bolt of
, however an Aluminum -- being also prodigal -- it fastens too much and cautions are required.
Since it is not a Parts with the high
price, it exchanges freely, and feeling can be changed, and there is well.
View detail
Fits: KAWASAKI ZZR1400 (ZX-14)
The quality of a Lever is very good. Positioning of a beautiful Lever also does milling marks finely dramatically. There are , however a MASTER main part and the portion in which it interferes a little.
The quality of a Lever is very good.
Positioning of a beautiful
Lever also does milling marks finely dramatically.
There are
, however a MASTER main part and the portion in which it interferes a little.
View detail