Reviews
Flexible and good
Used to replace front and rear Aluminum WheelTires on Addressv125g.
It is flexible, yet just the right thickness and large enough to replace the rim without damaging it.
The rim protector with a string attached that I bought from a certain NetShop broke after one use while installing a Brand New Tire, the string attachment part broke and fell inside the Tire, and I had to take the Tire off and on once more.
This product does not have such concerns.
Durability remains to be seen.
View detail
To Motorcycle without CoolantReserver tank!
CRF250RX does not have a Reserver tank for Coolant, so when it falls or boils, Coolant goes out.
If you don't Stack, don't stop, or don't dig, you may not need it, but if you're not a good digger like me, you'll definitely be happier with it.
However, just because it was attached does not mean that it will not overheat, so a cooling fan or similar device will be needed in a timely manner.
The amount of heat generated by the Racer is incredible, I hope Coolant decreases and we don't have Damage、、、、 on the Engine.
This is not a pontoon product, as it requires drilling with a drill. Please be careful about that.
The hose attachment nipple on the drain can be selected either up or down, but this requires drilling a hole in the originally blocked area.
View detail
moment
It was removed in an instant with a special tool.
It is oiled to prevent rust, and comes with a small amount of grease (pack) to prevent biting. A small amount (pack) of grease is also included.
View detail
I can't think of anything else.
This Cable Louver and Bell Hammer will make you happy!
Lubrication of the wire cable is completed in one stroke.
Clutchetc. operation system, even if you don't ride Off, the lighter the better, of course.
It is pricey, but well worth the purchase.
View detail
Use it and you'll be convinced!
I gave high marks to Costa, but at first I thought it was expensive!
But if you use it, you will be convinced and impressed, that's all!
No more frustration with Injector!
I definitely want you to use it!
View detail
Special Tool is now a discontinued MODEL.
This tool is used for hammering in Stem bearing.
Exclusive Design makes it easy. (and beautifully) Bearing race can be installed.
If the Manufacturer tool is already discontinued, you can have it.
View detail
Necessary for disassembling and assembling Engine.
The price is a bit expensive, but it is necessary for disassembling and assembling off-road engines for competition use. The Blue Anodized is like Motion pro, and the Parenthesis is nice. View detail
Overhaul of Master Cylinder
It is very useful when doing overhaul of the brake master cylinder.
It is a Copy product of HondaOEM tool, but it is durable and easy to use.
I use it a lot for my work, so the price is not expensive and well worth it.
View detail
It's the only way
I had another wire injector, but when I used it, the oil leaked out and it was no good at all. This one, however, did not leak any oil and did exactly what it was supposed to do. The price may be high, but this is the only way to go. View detail
Fits: HONDA XR650 L, HONDA XR650 L, HONDA XR250 R, HONDA XR250 R, HONDA VT750 CD2, HONDA VT750 CD, HONDA VT750 C, HONDA VT750 C, HONDA VT750 C, HONDA VT600 CD, HONDA VT600 CD, HONDA VT600 C, HONDA VT600 C, HONDA FT500(82-83), HONDA GB500, HONDA NT650, HONDA NX650, HONDA RVT1000R, HONDA TL250(75-76), HONDA VF1000F(84)
VFR750F Flywheel removal!
Must-have item to remove the Flywheel due to StatorCoil failure! The puller itself looks like just a thick bolt, but the screw threads and texture are solid! It's a good time to be able to find tools like this quickly, as the number of old motorcycles increases and special tools are suddenly needed. View detail
Used in CRF150R
Used on CRF150R.
It does not seem to be a common Size, but it is easily available.
View detail
Excellent price, fast shipping and a quality product!
High quality flywheel puller. Motion pro always produces quality products that do the job! It's pretty cheap, so don't try to lift your flywheel. Take the hammer and do it right. I've used this hammer several times and it works flawlessly. Just keep the gears lubricated.. I bought this to remove my Honda's flywheel. The flywheel hammer worked like a dream. I can't say anything bad about it. The price was great, shipping was fast and the tool did exactly what I needed. View detail
works well and easy to use
Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes. Used on both my clutch, and my flywheel. This tool worked well and saved me alot of time when disassembly and rebuilding my motor. Built with quality and easy to use. This tool is a must for engine rebuilding View detail
Great product for all chains and even better for oil ring chains.
Motion pro makes great tools. Thanks to Webike, I'm quick to pick up and try. Since getting this tool, I've made loads of chains for myself and others. Good build quality on tools and parts. If you see criticism of people breaking and hurting ropes... just ignore them. 99% of these people did not disassemble the tool when they received it and greased all the threaded parts. This tool can be put under a great deal of pressure during use. Screws exposed to high pressure during operation must be lubricated. The tool works flawlessly. Another tip is that if you are breaking a riveted joint, sand the pin heads flush with the side plate before trying to push the pins out, as you will need to replace it in any way. This takes pretty much all the stress on the tool's pin driver as you don't have to push a cork pin down a smaller hole. It takes just 10 seconds with a grinder to grind each of these mushroom chain pins flush with the side plate. The storage box is well made and compact enough to carry with you when you travel if you want. Worth the extra money because it makes the job so much easier. View detail
Perfect for Chain cleaning!
I bought it with ChainOil and MaintenanceSTAND because I found Rust after a short while of riding in the rain.
The shape was made for Chain and the bristles were hard and good for removing Rust.
I feel that it can be applied evenly when applying Oil.
View detail
Smaller than expected, but totally does the job. Very durable
This didn't fit perfectly as I had hoped, but I can't fault it much since it is a universal design. Some reviewers are complaining the tool is susceptible to damage - since it is aluminum and basically designed to jam the equivalent of a miniature wood chipper, you shouldn't expect it to withstand substantial torque. I bought two just in case and used them to do a valve job on my 2013 crf450r instead of the expensive factory Primary Gear Block tool without removing the clutch. I was able to jam the cam gears as well as the primary gear, though I was careful not to transfer too much force onto the cam chain by using secondary locking methods to spread the forces. I also used it as a secondary lock in conjunction with a large crescent wrench for removing the flywheel, eliminating the need for the pricey factory Flywheel Holder tool. NOTE: There is nothing in the Motion Pro line designed for automotive repairs. Though it may work on cars, this tool is intended for motorcycles. View detail
Convenient
Fluid replacement time is totally different without it. I use Astro's One-Way Valve. Highly recommended! View detail
Multi Purpose Tool
I saw an article in some media that said it was a must-have for off-road motorcycle riders, and I had to have one, so I bought it.
It is rather solid and seems reliable.
I think it is sufficient as a tool to be carried at all times.
Carried with Small TypeMONKEY Wrench
View detail
Easy to use
Small Spring hook, but I use it differently depending on the situation.
It is often used for relatively small springs for exhaust pipes and side stands.
Compact but can be pulled on and off firmly, so it is easy to put on and take off.
View detail
Easy to use
Drive chain can be cleaned efficiently.
The Chain is very easy to clean because three surfaces can be polished at once:the reverse side, the front side, and the roller section.
The hardness of Brush is just right to remove dirt.
View detail