Reviews
As a primer to make car washing easier.
I used to put my off-road motorcycle on the transporter after a race and ride it home without cleaning the dirt off the body. However, by the time I arrived home, the dirt had hardened into a stubborn stain, making it difficult to wash the bike each time... (And mud falls in the Transporter...) If that's the case, why don't you just clean up the dirt there? So why don't we just clean the dirt off the car locally? I bought this to clean the dirt that gets into the back of the Fender, the footpeg, and the tight spots on the body at the site! I will use it in the future when I have a chance. View detail
Made of high quality Stainless steel!
It is easy to use because it is expensive and the Tray section is thick and quite stable (heavy in weight).
Stainless steel is good… expensive but lol.
The Week Point is that the Magnet on the back of the Tray came off (fixed with glue) … It's expensive, so please make it more durable lol.
View detail
Excellent price, fast shipping and a quality product!
High quality flywheel puller. Motion pro always produces quality products that do the job! It's pretty cheap, so don't try to lift your flywheel. Take the hammer and do it right. I've used this hammer several times and it works flawlessly. Just keep the gears lubricated.. I bought this to remove my Honda's flywheel. The flywheel hammer worked like a dream. I can't say anything bad about it. The price was great, shipping was fast and the tool did exactly what I needed. View detail
works well and easy to use
Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes. Used on both my clutch, and my flywheel. This tool worked well and saved me alot of time when disassembly and rebuilding my motor. Built with quality and easy to use. This tool is a must for engine rebuilding View detail
Perfect for Chain cleaning!
I bought it with ChainOil and MaintenanceSTAND because I found Rust after a short while of riding in the rain.
The shape was made for Chain and the bristles were hard and good for removing Rust.
I feel that it can be applied evenly when applying Oil.
View detail
Love this tool!!!
When I re-grease the linkage on the rear suspension there's one nut (connecting arm to frame nut) that I can't get a torque wrench on because there's not enough room. So I've been tightening it without the torque wrench wondering if it's too tight or not tight enough. Didn't want to spend the $ for one nut. Finally after several grease jobs and worrying about that nut I decided to buy the adaptor. The instructions were easy to follow. I was able to use the adaptor at a 90 degree angle to the torque wrench so I didn't have to recalculate the torque. The tool works awesome and I tested it to some other nuts that are accessible with the torque wrench alone. Spot on! I basically bought the tool for one nut but I'm glad I did. I am a wrench head and love to work on my bike and want it.done right. To me it's worth it for the peace of mind. Nice addition to the tool box!! View detail
Love this for my bikes plugs!
I haven't bought a gap tools for over years. Turns out mine were all too big. This fills the bill being light and easy to use.Handy tool to have in your moto box. Well made, durable, works as it should, and looks cool as well! No complaints here.I use it more to open a nice cold adult beverage than i do for gapping spark plugs, but it works great for both! View detail
Smaller than expected, but totally does the job. Very durable
This didn't fit perfectly as I had hoped, but I can't fault it much since it is a universal design. Some reviewers are complaining the tool is susceptible to damage - since it is aluminum and basically designed to jam the equivalent of a miniature wood chipper, you shouldn't expect it to withstand substantial torque. I bought two just in case and used them to do a valve job on my 2013 crf450r instead of the expensive factory Primary Gear Block tool without removing the clutch. I was able to jam the cam gears as well as the primary gear, though I was careful not to transfer too much force onto the cam chain by using secondary locking methods to spread the forces. I also used it as a secondary lock in conjunction with a large crescent wrench for removing the flywheel, eliminating the need for the pricey factory Flywheel Holder tool. NOTE: There is nothing in the Motion Pro line designed for automotive repairs. Though it may work on cars, this tool is intended for motorcycles. View detail
Perfect tool for the job!
I was a little skeptical about this tool working as promised, but I'm happy to say it got the job done pretty well. ther than the fact that you need both tools, it was worth it for me because I have multiple bikesDefinitely recommend to have for steering stem bearing removal and installation!! Makes a dreaded job so simple. Takes longer to set up tool than to get the bearing off. No cutting, no beating. Pulls bearing off with NO damage to stem or clampsWish they were not as expensive as they are since it's such a specific application but it really does work like a charm. View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail
Convenient
Fluid replacement time is totally different without it. I use Astro's One-Way Valve. Highly recommended! View detail
It is a good Brush.
It washes Chain well.
You can wash the Tire by simply turning it by hand to scrub it.
It would last about two years.
View detail
Multi Purpose Tool
I saw an article in some media that said it was a must-have for off-road motorcycle riders, and I had to have one, so I bought it.
It is rather solid and seems reliable.
I think it is sufficient as a tool to be carried at all times.
Carried with Small TypeMONKEY Wrench
View detail
Easy to use
Small Spring hook, but I use it differently depending on the situation.
It is often used for relatively small springs for exhaust pipes and side stands.
Compact but can be pulled on and off firmly, so it is easy to put on and take off.
View detail
Easy to use
Drive chain can be cleaned efficiently.
The Chain is very easy to clean because three surfaces can be polished at once:the reverse side, the front side, and the roller section.
The hardness of Brush is just right to remove dirt.
View detail
You can throw away everything but this.
[How is it used?
of those already using it. Throw away everything but this." The first time I bought the product was when I saw an impression of the product.
It took a lot of courage to invest nearly 5,000 yen in a wire injector, but I was dissatisfied with all the wire injectors I had used so far (*such → https://www.webike.net/sd/2073358/), so I decided to take the plunge and buy one. I was not satisfied with all the wire injectors I have used so far, so I decided to take the plunge and buy one.
In case you are wondering how many times the general wire injector has been replaced (tightening Dial is Quantity:2pc. I have a Set! (and as a result of buying more every time there was a change), so I have 3 or 4, but I don't use them at all.
Classic "Put engine oil in a Vinyl bag and hang it up. This is because you can't hit a Tai KATANA on the method.
Was the one you received as per Image?
As per Image
Translation (Instruction Manual for enter here is included and easy to understand.
How was your experience with it?
Perfection!!!
The oil was perfectly lubricated, with no spurts of oil from the gaps.
What's more! We want to carry out the process of flushing out the dirt inside before lubricating, but until now, the only way to do this was to completely remove the Wire and put it in and out of the kerosene container by hand...etc.
However, with this product, after Parts Cleaner is sprayed, it can be quickly pressed down for cleaning at a great speed.
Gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo!
[Points to note]
The inside rubber packing is oriented.
You will not make a mistake because it is written in the Instruction Manual, but if you lose the Instruction Manual (and you probably will), take a close look at the shape of the Case and Packing to make sure you do not make a mistake.
If you look closely, you can see that the Taper is different!
Also, the Button part to push in is hard at first, so lubricate Large.
If it's not lubricated, it just hurts the belly of the finger that pushes it in.
How did it compare to other products?
The other Cable injector is Garbage.
Replace it now and throw it away.
Points and hangs of ▼ installation/Items to be purchased together/Opinions and requests to the Manufacturer
Other Cable injectors usually have the Body as Material:Aluminum, which is a material with a Body:Plastic, so I'm a little concerned about hydrolysis over time.
View detail
Easy to use, helpful
I purchased this product for daily maintenance.
The following is a brief introduction to the ChainMaintenance flow:1.
Wash car→Clean with Chain cleaner and Chain brush→Lubricate with Super chain oil
This Brush can be cleaned in just the right position. Thank you for your help.
View detail
Rakuraku Chain brush
The U-shaped Chain brush has short, stiff bristles on three sides, making it very easy to clean!
Regular Brush is only one side of the Large body, which makes it much easier to clean, and shorter!
The other side also has a long tipped Brush, but I personally don't think I'll have much chance to use it, so I wish they would remove that part or make the tipped Brush a little shorter.
View detail
For Harley Clutch Adjustment
Bought this to adjust the clutch on my Twin cam.
It was easy to use, accurate, and did its job well.
Adjustment requires a separate 7/32 HexaWrench and 17mm Glasses for this tool.
View detail
Convenient and easy to use
At first I was doing my best to scrub with the brush attached to the WAKOS Chain cleaner, but when I found this, I was amazed at how convenient it was. I was surprised that there was such a useful thing, so I bought it on impulse.
I've used it and it's really convenient! LOL!
I can do all three sides at once. (Each one is separate in a sense, pressing against the area you want to polish.) Definitely a time saver!
And it polishes surprisingly well and cleans properly!
But if you want to get rid of the stains without leaving any details, you should do it carefully and carefully as if you were brushing your teeth with the brush attached to WAKOS. I thought.
But I honestly use it without any problems at all because it cleans up well enough for me lol.
Because there is no breakage of Brush especially though I used it with dozens of times already, I thought that it was considerably excellent also about durability.
The price isn't that high, so if you're doing detailed chain maintenance, I'd recommend using this because it's easier and faster!
View detail